* For commercial use: Durable, powerful and robust.
* External motor, not in the air flow. Therefore not sensitive to hot, greasy and polluted conveying media.
* High pressure capacity.
* Optimised efficiency through impeller with blades curved to the rear.
* Very quiet: Housing with 40 mm sound insulation.
* Condensation drain as standard.
* External assembly possible
* Simple cleaning thanks to swivellable fan.
* Up to 7,200 m³/h.

Features

* Double-walled housing made of galvanised sheet steel, for high demands and especially low noise levels.
* Supply of medium to large air volumes at high resistances.
* Suitable for transporting dirty or greasy air up to 100°C.
* Maximum airstream temperature 80°C with speed control.
* Inlet and outlet side connection couplings for direct installation in ventilation ducts, with double sealed lips.
* With mounting track and 4 vibration dampers.
* Fan unit can be swivelled out for cleaning and maintenance.
* Motor located outside of the air flow.
* With condensation drain if the exhaust socket points upwards.
* Strong centrifugal impeller with backward curved blades.

Motor

* Motor can be regulated using voltage reduction.
* Terminal connections for thermal contacts.
* Motor protection through an external MAICO MVE 10 triggering device.
* IP 54 degree of protection for closed housing covers as well as duct connections fitted on the inlet and outlet sides.
Mounting instructions

* Installation with upward, right-hand or left-hand exhaust socket.
* If the unit is mounted with the exhaust socket pointing to the left or the right, the service door must be altered by the customer.

See this LINK for specifications.