Designed for wall, ceiling or window mounting, the efficient and easy to install range of 150mm (6") extractor fans are available in ten options, and are an alternative style and design to the traditional 6" kitchen style.
• The extract rate for the 150B Series is 230m3/hr, 64 litres per second.
• Designed to comply with the 2006 Building Regulations on Ventilation (F1), rated to IP24.


The XF150B Series comprises fan unit and box only.

The Standard model is for remote switching.
This series is designed to be mounted on walls or ceilings (Pullcord models wall mounting only) through 150mm (6") diameter flexible or rigid pipes. Also suitable for use with the Manrose low profile flat channel ducting systems.

Additional Data
~ 150mm (6") Range
~ Maximum pressure: 50 p.a.
~ Fan speed: 2400 r.p.m.
~ Sound volume: 40.0 dB(A)
~ Maximum operating temperature: 40°C.
~ The extract rate of all models is 230m³hr, 64 litres per second.

Model Options
XF150BS - Standard model for remote switching.
XF150BP - As above supplied with pullcord switch.
XF150BT -`Timer model incorporating integral adjustable electronic timer (adjustable 1-20 mins).
XF150BH - Humidity control fitted with our new 2 speed option as standard. The fan will run at full speed on integral or remote switching but will run at about half speed when humidity rises over the pre-set level which is adjustable between 40% RH and 95% RH. Complete with integral adjustable timer (adjustable 1-20 mins). Secondary speed is also adjustable.
XF150BHP - As above but with pullcord overide.
XF150BTP - Timer version with pullcord overide and neon light.
XF150BPIR - PIR activated model with adjustable timer which switches on as a person enters the room and runs on after the room is vacated. There is no need to connect to a separate switch. Timer adjustable between 1-20 mins. Requires no switched live.