• Model:HR100-RS

HR 100 RS Single Room MVHR

£ 353.68 (excl. VAT)

£ 424.42 (inc. VAT)

The HR100R and HR100RS are ideal for single bedroom/bathroom applications such as hotel rooms, nursing homes and residential care homes.

The HR100RS features bottom access and is ideal for installation on the ceiling slab above a suspended ceiling.

The unit comes fitted with a single 2-speed motor, and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control.

An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing its relative humidity.

Up to 18 l/s FID capacity (extract airflow). The unit provides superior control of condensation and odours. Suitable for use in bathrooms or small internal rooms.

Installation
The HR100RS is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using worm drive clips.

A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

P/N 435004
PDF Files


Product Sheet


Instructions

Available Options

1 x HRSB/6-710/24-BZ1 x Elta Wall Cowl SWC35/401 x CBMT/Q 200-54 1 HEATER KIT1 x Ducting 45 Degree Bend - 630mm1 x Spiral end cap - 80mm1 x K 250 L Sileo1 x KV 250 L Sileo1 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -4pole1 x HQD 315/2 EX - ATEX Rated Plate Axial Fan (2-pole)2 x Female Ducting Connector - 100mm1 x CBMT/Q 100-06 1 HEATER KIT1 x Etamaster EM 250 EC 01 inline mix-vent fan1 x Elta Wall Cowl SWC25/311 x CBMT/Q 160-15 1 HEATER KIT1 x Spiral Duct Grille Termination - 80mm1 x Elta Wall Cowl SWC56/631 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -2pole1 x Jetflow-HIT Metal inline - 250mm1 x CBMT/Q 150-27 1 HEATER KIT1 x Helios DDF-400 Roof Cowl1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x Flanged Spigot - 80mm1 x CAB-125 ECOWATT Energy Efficient Acoustic Box Fan1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 560mm1 x Soler & Palau TCBT/6-400/H - IP441 x Elta SLC400/4-3AC - IP551 x KVK Slim 315 - Low profile Semi Acoustic Box Fan1 x CCZ-404 (Single Phase)1 x CCZ-404-T (three Phase)1 x GB-KW 355 Drain pan for Giga Box Fans - 355mm1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x Rosenberg ATEX DKHM 355-4SW.110.5DF-E751 x HRFD 250/4 EX Atex Rated 250mm Cased Axial Fan 400v1 x PBB/4-400 Portable Cooling Fan1 x CBT-130N Centrifugal ATEX II 2G Exd IIB T41 x EnergiSava 210 Low Energy Heat Recovery Unit1 x HRFD 315/2 EX Atex Rated 315mm Cased Axial Fan 400v1 x ZAC- 350 -4-11 x 400mm x 400mm Metal Grille Box - 250mm Side Entry1 x Raptor SDA400/4-1AC1 x Ducting Y Piece - 100mm1 x ACQ-20012D Acoustic Inline Box Fan1 x Duct Fast Clamps - 100mm1 x DV-ROF-V-225 Roof mounted unit1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT560/4-3AC1 x Elta SLC355-1EC -IE5 Motor- IP55
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...