• Model:EJ361460

35JM/16/4/5/22 - 4Pole - 1PH - Long Cased Axial Fan - EJ361460

£ 715.50 (excl. VAT)

£ 858.60 (inc. VAT)


Flakt Woods 35JM/16/4/5/34 - 4Pole - 1PH - Long Cased Axial Fan - EJ361460

SPECIFICATIONS
Max Airflow: 2,268m3/hr
Motor Power:75W
Motor RPM:1420 rpm
Max Amps :0.5A
Temp Rating: -40°C to +50°C
Weight:25.0Kg

IMPELLER:
BLADE DESIGN: Woods’ AEROFOIL blades incorporate bespoke aerodynamic profiles that are optimised to provide high levels of performance and efficiency with minimal noise generation whilst providing a robust mechanical design.
HUB DESIGN: Profiled hub and clamp-plates are used to retain the blades, whilst permitting blade angle adjustment when the impeller is at rest. Hubs are fitted with an integral steel insert to provide a resilient interface with the motor drive shaft.
STRUCTURAL DESIGN: Impellers are designed with a minimum safety factor of 2.0 when performing within their qualified operating range.
MANUFACTURE: Hub and blade components are precision die cast, or for larger fan diameters, have gravity cast components, using aluminium alloys that have a high levels of strength/weight ratio and provide excellent corrosion resistance. All impeller components undergo real time X-ray inspection to assure structural integrity.
BALANCE: In accordance with ISO 14694, Grade G16 to G2.5, depending on rated motor power.
FORM OF RUNNING: Form B: Airflow through impeller then over the motor (as standard). Form A with airflow over the motor then through the impeller is also available.
IMPELLER LOCATION AND FIXING: Impellers are located on the motor drive shaft by a retaining washer and screw fitted into a tapped hole in the end of the shaft and positively secured with either locking compound or mechanical fixing. Torque transfer is by a key and keyway manufactured in accordance with BS 4235:1972.
NON-OVERLOADING: JM Aerofoil fans have a non overloading characteristic; the peak power input occurs within the range of normal operating pressures and is always exceeded by the motor rating.

FAN CASING
MATERIAL: Casings are manufactured from mild steel to BS EN 10111 Grade DD11.
CASING DESIGN: With integral pre-drilled flanges and fully welded seams. Casing and flange thickness varies depending on fan diameter and motor size. Long cased configurations enclose the entire length of the impeller and motor assembly and are complete with a duct mounted terminal box and inspection port. A rubber moulding is fitted to the port. Short cased configurations where the motor extends beyond the casing are available without a terminal box or sight port. Electrical connection is made directly to the motor.
CASING FINISH: Hot dip galvanised after manufacture to BS EN ISO 1461.
CONNECTION FLANGES: Flanges are an integral part of the fan casing and feature fixing holes that are equi-spaced around a pitch circle diameter to facilitate connection to duct work in accordance with BS EN ISO 13351.

MOTOR
TYPE: Fan motors are of the totally enclosed, squirrel cage induction, S1 continuous duty type.
MOTOR RATINGS: Woods uses integrated fan motors where the ratings are determined in full accordance with IEC 60034-1 when the motor is installed in the fan. Most motors are classed IC 418 according to IEC 60034-6 and therefore cannot be operated when separated from the fan unless a derated TENV rating is applied.
TWO SPEED: Pole Change (also known as PC or Dahlander) motors operate at one of two speeds by reconnecting a single winding via six winding terminals to create the required pole configuration. Dual Wound motors have two separate individual windings of the requisite poles to achieve the required speeds.
ELECTRICAL SUPPLY: Single and three phase motors are available.
220-240 V 60 Hz single phase (1Ø)
400 V 60 Hz three phase (3Ø)
440-480 V 60 Hz three phase (3Ø)
(Other voltages and 50 Hz variants are available on request).
Single phase motors are of the capacitor start and run type. All motors are capable of withstanding direct online starting.
SPEED CONTROL: All three phase, single speed motors are suitable for inverter control. Transformer or electronic control options are also available for some smaller frame sizes.
BEARINGS: Either ball or roller type bearing with an L10 design life of at least 20,000 hours when calculated using ISO 281 for rated fan duty.
MOTOR FINISH: Aluminium self-finish or Cast iron painted to motor manufacturers specification.
INGRESS PROTECTION: IP55 with drain plug fitted.
TERMINAL BOXES: Where fitted, all terminal boxes shall have the same level of protection as the motor.
STANDARD TEMPERATURE FANS: Fans are designed for continuous operation from -40°C to +50°C, with motors suitable for starting at temperatures above -20°C.

PERFORMANCE DATA
Fan performance data is derived from tests conducted in the Woods’ laboratory (accredited by AMCA in accordance with ISO 5801) and is intended for fully ducted, type D configurations.
Acoustic data is derived from tests conducted in the Woods’ laboratory in accordance with ISO 5136 specifically for ducted conditions.
REVERSAL OF AIRFLOW
Woods Air Movement has developed the JM Aerofoil to provide optimum aerodynamic and acoustic performance.
As well as achieving enhanced performance, the development process has established the operational limits of the impellers in all circumstances.
Stress measurements have been conducted when operating in both forwards and reverse modes in order to determine the maximum speeds for continuous operation. This also involved extensive testing of the materials in order to establish relationships between life, operational stresses and casting quality.
Since the stresses experienced in the reverse mode are generally higher than those in forward operation some impeller configurations are not available for reverse operation at maximum speed. In all instances where reverse operation is required, please enquire to confirm suitability.


WARRANTY PERIOD
Our standard warranty period for both the fan and motor is 2 years from date of despatch.
PDF Files


35JM Dimensions


JM range specs


JM wiring

Available Options

1 x CBP-18/185 x Spiral Ducting 1 meter - 560mm4 x Elta SLC710/4A-3AC - IP555 x Ducting 45 Degree Bend - 250mm2 x Soaker Sheet to suit RA315/3004 x DA 18 - 18 NT -with Feet (72600007)4 x 220x90mm 90 Degree Vertical Bend2 x Ducting T Piece Equal - 560mm9 x 204x60mm 90 Degree Horizontal Bend4 x Ducting 30 Degree Bend - 1000mm2 x Chaysol da 9-91 x CBMF 250-6,0 400V/2 Duct heater2 x MFL-160 G4 Filter Box5 x CBMT/Q 315-90 3 HEATER KIT4 x G4 duct mounted panel filter - 290 x 290 x 47mm1 x Elta SCP710/4/6-3AC - IP551 x 110 x 54mm Vertical 45 Degree Bend6 x A Duct Mountable - Double Drilled Fixing Flange (PAIR) - 1000mm3 x Metal Inline Fan - VENT-100NK4 x DPD SATURDAY Delivery Surcharge6 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x Filter Box With F7 Grade Bag Filter - 200mm3 x Soler & Palau TCBB/4-450/H - IP655 x CFDM-100 Circular Twin Blade Fire Damper3 x Bathroom Fan -Envirovent- Silent 100 S (Standard Model)2 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -2pole1 x Elta SLC1000/6A-3AC - IP558 x Three Phase ATEX Compact axial fan - 355mm - compactA3ATE5 x Ancillary Pack for SLC-6303 x AXCBF 400D4-32° (0,55 kW)4 x *VORT HRW 30 MONO Evo HCS - Single Room Heat Recovery Unit,5 x 125mm Round Equal T Piece3 x DVS 450EV Centrifugal roof fan, vertical discharge7 x Etamaster EM 150 L EC 01 inline mix-vent fan3 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3555 x Spiral Ducting 1 meter - 500mm5 x Ductwrap Insulation DW503 x Elta SCP250-1EC - IP553 x 1mtr Round Ducting - 100mm4 x Ducting T Piece Equal - 630mm1 x Spiral Ducting 1 meter - 400mm2 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT560/4-3AC3 x Digital Room Thermostat - DRT3 x Helios ELS-VE 1002 x Mounting Feet (Pair) for SLC-450-060B-04501 x Elta SLC710/4B-3AC - IP554 x Ducting 90 Degree Bend - 180mm3 x Spiral end cap - 160mm5 x Spiral Ducting 1 meter - 630mm1 x Inverter VFKB 455 x Carriage for Scottish Highlands5 x 220x90mm 45 Degree Horizontal Bend2 x WHR 400 - Water Heater Battery for Circular duct - 400mm4 x 150mm Round 45 Degree Bend3 x CAB-400 ECOWATT Energy Efficient Acoustic Box Fan1 x Elta SLC315/4-3AC - IP553 x Ducting 90 Degree Bend - 710mm1 x Elta SLC400/4-3AC - IP556 x Small Centrifugal Fans CBM/2-133/190 185w4 x Spiral end cap - 315mm5 x Ancillary Pack for SLC-4504 x A Duct Mountable - Double Drilled Fixing Flange (PAIR) - 355mm2 x G2 duct mounted panel filter 630mm1 x ORKA HR D150 R8 MVHR unit2 x Elta SCP250/4-3AC - IP551 x CBMT/Q 250-30 1 HEATER KIT6 x Spiral Ducting 1 meter - 125mm3 x Helios SB-250-EC SilentBox Acoustic Inline Fan4 x Ducting 90 Degree Bend - 1000mm5 x KITCHAVENT 2000 - 2 Stage - Odour Control Casing5 x Metal Inline Fan - VENT-315NK1 x Ducting 90 Degree Bend - 100mm4 x 100mm Round Equal T Piece3 x Soler & Palau - Contra Rotating TCBTx2-560 - IP653 x Soler & Palau TCBB/4-400/H - IP541 x Elta SCP450/4-3AC - IP553 x Elta SCP560/4-3AC - IP554 x Helios M1/100 Fan5 x CBMT/Q 250-54 1 HEATER KIT1 x Spiral Ducting 1 meter - 710mm1 x Acoustic Powerbox-450mm & Inverter (Single Phase) - PB4501401 x G4 duct mounted panel filter - 390 x 390 x 47mm3 x Silent 300 HTP5 x 110 x 54mm Low Profile Plastic Ducting - 2 Meter5 x 150mm - 100mm Round Reducer3 x Ducting 90 Degree Bend - 150mm2 x Helios SB-200-EC SilentBox Acoustic Inline Fan1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX400/2-3 Three Phase4 x 100mm Round 90 Degree Bend4 x Elta SCP710/6/8-3AC - IP554 x Atex Motor Protection Switch - U-EK230E EX3 x Etamaster EM 250 EC 01 inline mix-vent fan7 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3005 x 110 x 54mm Horizontal 45 Degree Bend4 x Spiral Ducting 1 meter - 150mm6 x 3-pin Plug and lead for TD Silent Ecowatt4 x 220x90mm 45 Degree Vertical Bend7 x BD7/7 centrifugal M4 0.13Kw2 x Jetflow-HIT Metal inline - 125mm5 x Elta SPA350/4-1AC - IP442 x Mounting Feet (Pair) for SLC-630-060B-06305 x MRAS series fan5 x Ducting 45 Degree Bend - 560mm4 x Impeller Side Guard - 315mm4 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x JETLINE-150 ECOWATT - In Line Centrifugal Duct Fan2 x Atex Inline Fan 250mm - ERM25EXE3 x Ducting 90 Degree Bend - 630mm3 x 150mm Round 90 Degree Bend1 x Soler & Palau TCBB/4-355/H - IP544 x FlameProof Plate Axial Fan - Three Phase - 12 inches - Eexd IIC T4 -4pole2 x 204x60mm Rectangular to 125mm Round Adaptor4 x Etamaster EM 315 EC 01 inline mix-vent fan2 x Ducting 45 Degree Bend - 100mm5 x Silent 100 CZ Design 12V Ecowatt + CT-12/164 x Ducting 90 Degree Bend - 400mm4 x Elta SLC500/2A-3AC - IP554 x Anti Vibration Mounts - Large - KSE-702 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX630/4-3 Three Phase5 x Elta Standard Ambient Flexible Connector - 500mm2 x Mounting Feet (pair) for SB-CON 4004 x 125mm Round 90 Degree Bend3 x HQD 355/4 Plate Axial Fan (4-pole)3 x Soler & Palau - HCBB/4-450/H -IP65 - BFLOW3 x Roof Axial Fan and Cowl including soaker sheet. - Three Phase -1000mm5 x Ducting 45 Degree Bend - 125mm1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX710/4-3 Three Phase3 x Elta SLC500/2B-3AC - IP552 x A Duct Mountable - Double Drilled Fixing Flange (PAIR) - 250mm1 x TD1300 Mixvent - 250mm3 x TD ECOWATT 350/125 Inline Duct Fan - TD-ECOWATT2 x Flexible PVC Ducting - 220x903 x Acoustic Box Fans (Inline) - CAB-2005 x 110 x 54mm Flat Channel Connector1 x Spiral Ducting 1 meter - 800mm5 x Elta SCP450-1EC - IP553 x Soler & Palau - HCBB/4-630/H -IP653 x Spiral end cap - 200mm1 x CBM 12/9 CM/AL 1100W 6PT - Closed Motor2 x Ducting 90 Degree Bend - 250mm3 x Spiral Ducting 3 Meters - 355mm1 x Etamaster EM 250 EC 02 (high Power) inline mix-vent fan4 x MUB 042 450EV Sileo Multibox1 x 220x90mm Elbow Bend with 150mm Fixed Spigot1 x Spiral end cap - 400mm1 x Impeller Side Guard - 350mm2 x Ducting 15 Degree Bend - 200mm4 x A Duct Mountable - Double Drilled Fixing Flange (PAIR) - 450mm6 x CAB-315 ECOWATT Energy Efficient Acoustic Box Fan1 x Jetflow Silent SJMF-S 250-1EC4 x 100mm - 125mm Round Reducer2 x AW 420 D4-2-EX Explosion Proof Axial Fan - ATEX2 x Helios SB-125-C SilentBox Acoustic Inline Fan2 x Ducting T Piece Equal - 200mm1 x Helios SB EC 125 A SilentBox Centrifugal Fan3 x Ducting 90 Degree Bend - 315mm4 x AW 710E6 Sileo1 x Acoustic Box Fans (Inline) - CAB-250N2 x Ducting T Piece Equal - 150mm2 x CBMT/Q 150-15 1 HEATER KIT3 x Helios SB-200-C SilentBox Acoustic Inline Fan6 x MPC 400 EC T30 - High Temp Acoustic Box Fan3 x Soler & Palau - HCBT/4-710/H - BFLOW1 x Hydor HPA400/6-1A4 x Elta SLC630/BA - Fan & Inverter Package1 x Ducting 90 Degree Bend - 355mm1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX560/4-3 Three Phase3 x Soler & Palau - HCBT/4-355/H - IP653 x Soler & Palau - HCBT/4-800/H - IP552 x Soler & Palau TCBT/4-800/H - IP653 x Spiral Ducting 3 Meters - 100mm2 x Spiral Ducting 3 Meters - 80mm2 x Elta SLC630/4B-3AC - IP551 x MRJ 350 protection guard from S&P3 x VENT LK ECOWATT Centrifugal In-Line Duct Fan - 150mm1 x FSAF800B1DA Silencer 860/161 x Hydor HPA500/4-1A2 x Duct Tape - High Temperature Resistance 350˚C - DTape3501 x Soler & Palau - HXBR/4-355/H - IP543 x Spiral end cap - 500mm3 x Soler & Palau TCBT/2-315/H-B E70 - IP551 x Spiral Ducting 1 meter - 315mm3 x JETLINE-150 - In Line Centrifugal Duct Fan1 x JETLINE-250 - In Line Centrifugal Duct Fan1 x 150mm - 200mm Round Reducer2 x 2mtr Insulated Round Ducting - 125mm1 x Duct Mounted Filter Box - G4 Grade Panel - 150mm2 x Metal Inline Fan - VENT-200NK1 x Ancillary Pack for SLC-5002 x Purlin Box 200/250 for RAW Cowls3 x Ducting 30 Degree Bend - 710mm2 x Synthetic Air Filter Media - 10mm x 2mtr x 20mtr Roll1 x Duct Mounted Filter Box - G4 Grade Panel - 250mm1 x 220x90mm Double Airbrick Adapter1 x Purlin Box 1000 for RAW Cowls1 x Ducting 90 Degree Bend - 200mm1 x Spiral Ducting 3 Meters - 450mm1 x HVAC Hanger Range - Tecwire - LF1 - 1mtr1 x Duct Mounted Filter Box - G4 Grade Panel - 355mm1 x Airvent Ceiling Sweep Fan - 36 inch - 444122
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...