• UPC/EAN:8413893602077
  • Model:CAB-100

Acoustic Box Fans (Inline) - CAB-100

£ 331.03 (excl. VAT)

£ 397.24 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 194.4 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113862300

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Acoustic series Data Sheet


CAB-100 Data Sheet

1 x 204x60mm Insulated Rectangular Horizontal 45° Bend1 x 220x90mm Insulated Rectangular Vertical 45° Bend2 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x GRA-100 External Grill by S&P1 x Elta Wall Cowl SWC35/401 x Elta Louvre Shutter - 400mm1 x Elta Wall Cowl SWC45/501 x Jet Cowl - 315mm1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7103 x 220x90mm Insulated Rectangular Horizontal 90° Bend2 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5952 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH2 x Mini Diffuser - 100mm2 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Vent Axia ACM 150 inline mixed flow duct fan1 x Push Timer Switch - ZA41 x Run On Timer - 5s - 4hrs - RT5A2 x Remote Timer Control - 13511 x Helios ZNE Electronic Fan Overrun Timer1 x Time Delay Unit - DT20B1 x 7 Day Programmable TIMECLOCK1 x TG-K Duct temperature sensor1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp2 x ACO8AC/EC AutoChangeover panel1 x Elta ACO Panel 149-ACO14E1 x EC-Vent control board1 x CONTROL ECOWATT - Basic1 x EM30-24 Electro-Mechanical Control Panel1 x ACO 149-ACO1/EDV1 x Systemair Save Connect 2.0 Internet Module1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x EC-Vent Room Unit1 x EM30-24 Control Panel Commissioning Service1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Transformer (silent) speed controller - RE 5.0 Amp1 x REB-CVF 0-10v Controller1 x Elta Wall Cowl SWC56/631 x PIR Sensor - PIR21 x PIR Sensor - PIR41 x SAVE VSR 300 heat recovery unit1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-4TK1 x Speed Controller - REB1-N1 x Silent 100 Window Kit - windowS1 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Speed Controller - REB51 x RDH FLEX-SQUARE - ADH/RDH 04501 x Transformer Speed Control - RTRE- 1.5Amp1 x CBM 9-9 550w 4P VR (Open Motor)1 x Speed Controller - REB11 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x Elta 6 Amp Electronic single phase speed controller with TK1 x REE-2 Electronic Speed Controller1 x MTS10- extractor fan 3 step switch1 x Universal Pipe Fixing Clip1 x DEF-CBM-RE-7 - Protection Guard1 x AIRVENT speed control - AIR4019611 x CBT-100N Centrifugal1 x Transformer 5 Speed Controller - ATC1-10TK1 x Vent Axia Silent 100T (TIMER)1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x UB47- Universal Insulated Terminal
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 131.69

I've had 2 of these fans for 4 years now, and they are great...