• UPC/EAN:8413893602077
  • Model:CAB-100

Acoustic Box Fans (Inline) - CAB-100

£ 315.27 (excl. VAT)

£ 378.32 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 194.4 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113862300

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Acoustic series Data Sheet


CAB-100 Data Sheet

1 x Curved boot - 200mm1 x Venturia Whole House Ventilation1 x Belt Drive Cased Axial Fan - 500mm - L version1 x PPF4 - Positive Pressure Supply Fan2 x *NEW* TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x FSD-TD 250mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x FSD-TD 200mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Belt Drive Cased Axial Fan - 500mm - H version1 x Anti Vibration Duct Suspension Rings - 200mm1 x 204x60mm 90 Degree Horizontal Bend2 x Soler & Palau TCBB/6-355/H - IP441 x 204x60mm 45 Degree Vertical Bend1 x Access Door for Circular Duct - 300 x 200 - SIZE 401 x KABT High Temp Acoustic Kitchen Fan & Inverter Kit - KABT/4-12000/560 ND - Pack 51 x CAB-400 ECOWATT Energy Efficient Acoustic Box Fan1 x HRST/6-800/28-BZ-68 (400V50)C1 x Spiral Ducting 3 Meters - 300mm1 x Female Ducting Connector - 80mm2 x CBT-100N Centrifugal1 x Male Ducting Connector - 80mm1 x Ducting 90 Degree Bend - 80mm1 x 125mm Wall Duct - 350mm1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Frequency converter RUCK - FU 075 211 x Economy Airvent 100mm Fan with Timer1 x Ducting T Piece Equal - 100mm2 x Male Ducting Connector - 100mm1 x Impeller Side Guard - 800mm1 x Purlin Box 300/315 for RAW Cowls1 x Elta Qube SQU Centrifugal Box Fan - SQU3/4-3 - Three Phase1 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -4pole1 x Economy Airvent 100mm Fan with Timer/Humidistat/Pullcord1 x Ducting T Piece Equal - 150mm1 x MV-Silent 250 Bathroom Extractor Fan Kit - Standard - No Timer1 x Duct Suspension Rings - 150mm1 x Male Ducting Connector - 180mm1 x Round ceiling diffuser 300mm1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-3AC - Three Phase1 x PCA Diffuser - PCA-2501 x Quietflow SQS200-1ECL - Centrifugal Box Fan1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-900-B 5.5kw1 x Metal Inline Fan - VENT-200NK1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-3AC - Three Phase1 x CRHB-250N Ecowatt - Energy Efficient Roof Fan1 x Balance S Diffuser - NO RING - 100mm1 x Etaline 450mm D4 01 (Three Phase)1 x Miniflow SMF Horizontal Roof Cowl SMF20/301 x Elta Unpodded Silencer Melinex 1D-450mm1 x Spiral Ducting 1 meter - 125mm1 x Spiral Rapid Lock Clamp - 125mm1 x GB-WSG 630 External Weather Louvers for the Giga-Box Fans - 630mm1 x Ancillary Pack for SB-CYL 400 model1 x GB-WSD 400 Weather Protection hood for the Giga-Box Fans - 400mm1 x CTI CVA-N 355/400 OUTDOOR COVER for CVAB/T Fans1 x Acoustic Box Fans (Inline) - CAB-315 RE1 x Ancillary Pack for SLC-900 for SLC900/4A-3AC and SLC900/8-3AC1 x ECS25/400 ECS25/400 SPRING A/V MOUNT1 x SD-MUB Vibration pad set1 x HVWC800 WALL COWL - for use with the HV-800 belt driven fans1 x HD Series Control Damper - 2000mm X 1000mm1 x SPI-250 C Iris damper1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX400/2-3 Three Phase1 x Soler & Palau - Contra Rotating TCBTx2-630 - IP651 x ISOR 250 EC 201 x Elta SLC450/2-1AC - IP551 x Acopel F400-630/1601 x Helios GigaBox 630mm GBD 630/4/4 centrifugal1 x Raptor SDA450/4-1EC1 x PVO 200 (2-POLE) Plate Axial fan1 x CBT-130N Centrifugal ATEX II 2G Exe II T31 x AXC 355-6/19°-2(B)-P (0.75 kW) - Smoke Extract Fan1 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x TTT/4-560/L N 0,75KW (230/400V50HZ)EXEIIT3 VE Atex Unit1 x TD1000 Mixvent - 250mm1 x Ducting 45 Degree Bend - 355mm1 x Spigot plate - 80mm1 x F7/G4 filter kit for IDEO HR unit1 x Rosenberg DQ 1000-8 plate axial fan1 x Helios GigaBox 560mm GBD 560/6/6 centrifugal1 x Duct Suspension Rings - 400mm1 x AKOR GD - Spare Motor1 x Spiral Ducting 3 Meters - 355mm1 x Female Ducting Connector - 400mm1 x *VORT HRW 40 MONO Evo HCS WIFI - Single Room Heat Recovery Unit,1 x Belt Drive Cased Axial Fan - 450mm - H version1 x 150mm Round 90 Degree Bend1 x Helios GigaBox 500mm GBW 500/4 centrifugal1 x DA7/7 Feet1 x ELS-GU Flush Mounted Casing1 x GB-WK Wall Bracket For Giga Box Fans - 400-630mm1 x KVK SLIM 500 EC - Centrifugal Circular Duct Fan1 x 150mm - 200mm Round Reducer1 x M8 x 3M Z/P Studding1 x FSAF450FTX 450 mounting feet (Pair)1 x Duct Mounted Filter Box - MINICELL F7 Grade Panel Filter 315mm Spigot1 x DA9/9 Feet1 x MFA-AR/AXC 315 mounting foot1 x Duct Mounted Filter Box - G4 Grade Panel - 355mm1 x AL 315 Mounting Feet (Pair)1 x Gripple HVAC Hanger Range - Loop Fast - LF2 - 3mtr1 x CCZ-404-T (three Phase)1 x 150mm Round 45 Degree Bend1 x KABT/4- 9000/5001 x ERM180EXE Bracket1 x PBT/4-400 Portable Cooling Fan1 x Duct Mounted Filter Box - G4 Grade Panel - 315mm1 x FSD-TD 150mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x FSD-TD 300 x 200 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM24-TF (SC)1 x FSD-TD 316 Grade Stainless Steel Fire and Smoke Damper, 700mm x 700mm, EASY FIX AF, GALV Case, GALV Blades, PM230v1 x Ducting 90 Degree Bend - 250mm1 x Spiral Ducting 1 meter - 80mm1 x Helios GigaBox 400mm GBW 400/4 centrifugal1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x EM 400 E4M 01 - Mixed Flow Duct Fan - 400mm1 x Spiral Ducting 3 Meters - 125mm1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x AL 355 D2 01 - High Performance Long Cased Axial Fan1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Helios HRFW 355/2 TK1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Elta SLC355/4-3AC - IP551 x Metal Inline Fan - VENT-250NK1 x 220x90mm to 160mm straight adapter1 x Sentinel D-BOX 150S/CP1 x Duct Suspension Rings - 355mm1 x Capacitor 4uf for use with the EBM A2E range1 x Heat Resistant In-line Axial Fan - VOK 150/120 H1 x Spiral Ducting 3 Meters - 80mm1 x Ducting 90 Degree Bend - 125mm1 x Flexible PVC Ducting - 204x601 x Singleflow SSDL150-1EC1 x Raptor SDA500/4-1AC1 x Duct Clamps box of 50 - 60mm - 270mm1 x 125mm Round 45 Degree Bend1 x G2 duct mounted panel filter 100-1601 x KVK SLIM 160 EC - Centrifugal Circular Duct Fan1 x Duct Termination with Mesh - 200mm1 x Acoustic MiniBox Fan - MINI-BOX 1501 x Etaline 400mm -EC1 x EM 200-E2M 01- Etamaster-2001 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-HWAS1 x CBM 15/15 6p 3phase 2.2kw1 x Elta Variable Speed Drive IP66 - 4.0KW1 x Helios GigaBox 250mm GBW 250/4 centrifugal1 x DV-ROF-V-225 Roof mounted unit1 x Manrose Humidistat - 13611 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x 125mm Round Condensation Trap1 x Duct Suspension Rings - 100mm1 x FU 22 04 Frequency Inverter1 x 400mm x 400mm Metal Grille Box - 250mm Side Entry1 x Jetflow Silent SJMF-S 200-1EC1 x Jetflow-HIT Metal inline - 125mm1 x Ducting 15 Degree Bend - 100mm1 x 220x90mm x 1m Insulated Rectangular Duct1 x Run On Timer - 5s - 4hrs - RT5A1 x Acoustic Commercial Kitchen Inline Exhaust Fan - MPS (Three Phase) - 315mm1 x 220x90mm x 2m Low Profile Plastic Ducting - 2 Meter1 x Flexible PVC Ducting - 220x901 x Soler & Palau - HXBR/4-355/H - IP541 x 220x90mm Flat Channel Connector1 x CBM 10/10 4 Pole 550watt RE VR (3 Phase)1 x 220x90mm Equal T Piece1 x Acoustic Box Fans (Inline) - CAB-100
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...