• UPC/EAN:8413893602077
  • Model:CAB-100

Acoustic Box Fans (Inline) - CAB-100

£ 315.27 (excl. VAT)

£ 378.32 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 194.4 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113862300

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Acoustic series Data Sheet


CAB-100 Data Sheet

1 x Ducting Y Piece - 315mm1 x Ducting 90 Degree Bend - 250mm1 x MEV Spider Additional Spigots1 x Duct Fast Clamps - 315mm1 x Ducting T Piece Equal - 250mm1 x Frequency converter FU 075 14 - IP661 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-HAS1 x Multiflow SMB550/4-1AC1 x MEV 160 & 300 Additional Spigots1 x Metal Inline Fan - VENT-200NK1 x Anti Vibration Duct Suspension Rings - 315mm1 x Ducting 15 Degree Bend - 250mm1 x DDMP 09/09 Mounting Flange1 x K 200 L Sileo1 x Female Ducting Connector - 315mm1 x OZEO ECOWATT 2 Wireless Low Energy Whole House Extract Ventilation Unit1 x Frequency converter RUCK - FU 075 211 x CVAT/4-4000/400 ND 0.37Kw (230/400V50HZ) EXDIIBHT4 - ATEX RATED CABINET FAN1 x Helios TSD 5.5 Transformer Speed Control (400v)1 x Dektite Combo Pipe Flashing - DC210REC1 x Elta Wall Cowl SWC25/311 x HV Wall Mounted Belt Drive Fan 1250mm 220V to 240V / 50Hz 1.1kW - Single Phase1 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -2pole1 x CBMT/Q 150-15 1 HEATER KIT1 x Kitchen Grease Filter - Mesh Type Non standard : 381 x 355 x 47mm1 x Rotorex HXTR Sickle Bladed Plate Axial Fan - 6 Pole - Three Phase - 710mm1 x Kitchen Grease Filter - Mesh Type NON standard 290mm x 290mm x 47mm Actual1 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x FlameProof Plate Axial Fan - Three Phase - 10.5 inches - Eexd IIC T4 -2pole1 x Male Ducting Connector - 500mm1 x Spiral end cap - 160mm1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 560mm1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x MFQ450-14 - SQUARE MIXED FLOW FAN - 450mm Single Phase1 x Anti Vibration Mounts - Small - Pack of 4 - AVM21 x Helios AV125 External Wall Fan1 x Kitchen Grease Filter - Mesh Type NON standard 195H x 597W x 47mm Actual1 x Jetflow-HIT Metal inline - 315mm1 x KVK SLIM 100 EC - Centrifugal Circular Duct Fan1 x CBMT/Q 400-55 1 HEATER KIT1 x HQD 630/4 EX - ATEX Rated Plate Axial Fan (4-pole)1 x 125mm Round Connector
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...