• UPC/EAN:8413893602077
  • Model:CAB-125

Acoustic Box Fans (Inline) - CAB-125

£ 315.27 (excl. VAT)

£ 378.32 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 223.2 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113210800

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-125 Data Sheet


CAB Series Data Sheet

1 x Speed Controller - REB101 x Soler & Palau TCBB/4-560/L - IP651 x PIR Sensor - PIR21 x Jetflow-HIT Metal inline - 200mm1 x MD - Motor Protection Switch (3 Phase)1 x MEV Spider Wireless boost Switch - MEV-SWH-W1 x Isolator Relay Controller - 4420301 x Isolator Switch - EFF-ISO1 x DS-2 2-Speed Switch (3 Phase)1 x ZAC- 350 -4-11 x Helios HRFW 355/4 TK1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Access Door for Circular Duct - 400 x 300 - SIZE 501 x Push Timer Switch - ZA41 x Differential Pressure Switch - 50 - 500 Pa - IP541 x Elta Unpodded Silencer Melinex 1D-500mm1 x Soler & Palau HXM-200mm1 x Elta SCP350/4-3AC - IP551 x HRT/6-800/28-BZN-68C1 x HV Wall Mounted Belt Drive Fan 800mm 220V to 240V / 50Hz 0.75kW - Single Phase1 x Elta HXP 800mm 6-Pole (Three Phase)1 x HRT/4-350-BPN E211 x Soler & Palau - HCBT/6-800/H - IP651 x Soler & Palau - HCBT/6-355/H - IP651 x STF1 Oscillating Tower Fan1 x CBM 10/8 6P 245W RE VR1 x HCFB/4-630mm plastic impeller plate fan1 x 100mm Wall Duct - 350mm1 x Circ.connection-125 fo EX-140 ATEX unit1 x CBS-100 Outlet Flange for CBT-1001 x CBMT/Q 400-9 3 HEATER KIT1 x Elta SPA560/4-1AC - IP541 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase1 x CBS-60 Outlet Flange for CSB/CBT-601 x HRT/4-630/25-APN C21 x Elta SPA560/46-3AC - IP541 x HRB/6-560-35-APN-C1 x HCFT/4-560mm plastic impeller plate fan1 x Anti Vibration Mounts - Small - Pack of 4 - AVM21 x Multiflow SMB500/4-1AC1 x Etaline 315mm - E2 03 (Low Power Version)1 x Elta Viper SCC Duct Mounted Centrifugal Fan - SCC630-1AC1 x MEV 160 & 300 FT (FastTrack) Additional Spigots1 x DA9/7 Feet1 x B-flow Impeller HCBB/T-560mm1 x CAB-125 ECOWATT Energy Efficient Acoustic Box Fan1 x Centrif Duo Plus - Timer1 x EnergiSava 210 Low Energy Heat Recovery Unit1 x Belt Drive Cased Axial Fan - 630mm - L version1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x 45JMP/16/4/5/3/3ph Plate Fan1 x 150mm - 100mm Round Reducer1 x Female Ducting Connector - 100mm1 x Raptor SDA560/6-1AC1 x HXP500/6-1 - 6 Pole - Single Phase1 x HRB/4-500-35-BPNC1 x Elta SLC560/2-3AC with inverter Drive & APK Mounting Kit1 x HRB/6-500-25-APN1 x Helios HRFD 315/21 x Belt Drive Cased Axial Fan - 450mm - H version1 x 110 x 54mm Vertical 90 Degree Bend1 x Floor Standing Cooler Fan- SRC-4501 x Elta Turboflow-TF - 450mm - Three phase1 x LINEO 200 QUIET ES1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-9000/500 ND - Pack 71 x ECO-500 Kitchen Extract Fan1 x FSD-TD 250mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Elta HWFA-650 Oscillating Wall Fan1 x Flanged Damper 019-0250-STD1 x 1mtr Round Ducting - 125mm1 x Airvent ceiling fan controller1 x Plastic Kitchen Extractors - CK25N1 x RS-160L1 x 125mm Round Equal T Piece1 x Helios AV125 External Wall Fan1 x Etaline 280mm1 x BDS 630/710 RA b/d shutter1 x Helios AV150 External Wall Fan1 x BDS 800 RA b/d shutter1 x Etamaster EM 250 EC 01 inline mix-vent fan1 x KD 250 M1 Circular duct fan1 x Acoustic Box Fans (Inline) - CAB-1251 x *TD EVO-250 - Environmentally Friendly Inline Fan*1 x TTT/4-800/H N 4KW (400V50HZ)EXEIIT3 VE Atex Unit1 x *TD EVO-100 - Environmentally Friendly Inline Fan*1 x Hydor HPA400/6-1A1 x EM30-24 Electro-Mechanical Control Panel1 x Quietflow SQS400-1ECL - Centrifugal Box Fan1 x EC-Vent control board
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 119.00

I've had 2 of these fans for 4 years now, and they are great...