• UPC/EAN:8413893602077
  • Model:CAB-200

Acoustic Box Fans (Inline) - CAB-200

£ 418.29 (excl. VAT)

£ 501.95 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 921.6 m3/h
Max Power: 205 Watts
Max Current: 0,70 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 22 Kgs
Part Num: 5113812400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-200 Data Sheet


CAB Series Data Sheet

1 x Flakt Woods ME 1.1 speed controller 1amp - EA9011572 x GENIOX 11 Roof Mounted External Unit1 x CBM 12-12 1100w 6P Three Phase2 x ACO3TO-ADS-VFC-7.1A1 x Silentub - STUB 1001 x Helios HQW-250/4 - IP551 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x Helios ZNE Electronic Fan Overrun Timer1 x Elta SCP400/4-1AC - IP551 x CCpro 40 (1CC9402) Long Casing Extension3 x SPI-100 C Iris damper1 x Comefri - TLZ 560 R - High Performance Scroll Fan1 x Electrostatic Precipitator - 1H x 3W2 x CBB-60N Centrifugal2 x DDMP 10-10 1F 1000W M6A2 DA51 x VTR 300 STD Filter Kit1 x ACO8AC/EC AutoChangeover panel3 x Helios RR-250-C Centrifugal inline fan4 x Duct Termination with Mesh - 450mm1 x Vertical Cowl and Fan (Single Phase) - RAV400-4-14 x CBM 7/7 147w 4P RE-VR2 x DDMP 12-12 3F 5700W M6M0 DG72 x DDMP 07/07 Mounting Flange1 x Duct Termination with Mesh - 100mm3 x CBS-100 Outlet Flange for CBT-1001 x HIMF - Mixed Flow Fan 125mm Inline Fan2 x CBT-100N Centrifugal1 x CSB-60 Centrifugal fan3 x RUCK MTP 20, 10K, Speed control1 x TD Mixvent 1100/250 EEXEIIT31 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR4 x DPD 12PM Delivery Surcharge1 x KBA- Inlet Mounting 1802 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit2 x ADH E0-450 Flange - 0450 ADHE/RDHE1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan1 x TUNE-R-200-3-M3 - Control Damper1 x Twinflow STDL315-1EC3 x Helios ESA-1 Surface mounted Speed Control 1amp1 x Mini Diffuser - 100mm1 x Round ceiling diffuser 300mm2 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR4 x ELTA - Three Phase Transformer 3amps2 x Duct Termination with Mesh - 400mm1 x SAVE VSR 300 heat recovery unit2 x DDMP 12-09 1F 1800W M6A4 DA81 x EBM-Papst D3G133-BF05-14 Double inlet2 x CBB-80N Centrifugal1 x VEKA INT 2000/15.0-L1 EKO1 x Flat Roof Terminal -OFT 5 - Asphalt4 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR3 x CBA-100 Inlet Flange for CBT-1003 x Quietflow SQS250-1ECL - Centrifugal Box Fan1 x CBM Low Pressure Centrifugal Fan - CBM 10/8 4 Pole 373watt CVR1 x 100mm Round Connector with Damper2 x RD35S-4DW.6W.3L - 122297 (Three Phase)2 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase1 x Elta SPA500/4-1AC - IP541 x Vent Axia Silent 100T (TIMER)1 x DDMP 10-08 FLANGE2 x Universal Pipe Fixing Clip2 x VTR 500 STD Filter Kit2 x 125mm Round Connector with Damper1 x Silent 300 CZ Design PLUS Extractor Fan1 x Comefri - TLZ 450 R - High Performance Scroll Fan3 x ELTA - Single Phase Transformer 2amps1 x Silentub - STUB 2002 x Nicotra RDH G2E7-04501 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm3 x Duct Termination with Mesh - 150mm2 x PM230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x RTRD - Three Phase Speed Controller - 4 Amp2 x RDS 1 Helios Transformer Controller With Motor Protection2 x Elta 2 Amp Electronic single phase speed controller.1 x Speed Controller - REB162 x RDH Flange - 02501 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x Vent Axia T-Series Wall Model TX6WL1 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan3 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x MWS 1.5 – Transformer Controller With Motor Protection1 x WS - Reversing Switch from Helios Fans1 x Elta 3 Amp Electronic single phase speed controller.1 x Helios HQW-315/4 - IP552 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x Flanged Damper 019-0560-STD1 x CBT-130N Centrifugal1 x F7 Mini-Cell panel filter - 594 x 5941 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x EMI 150L E2M - Acoustic Inline Mixvent Fan2 x TecFire Intumescent Damper - Rectangular 400x400mm1 x DDMP 12-12 1F 1800W M6A4 DA81 x DA9/9-NT3 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Temperature Controller - EDTW1 x Elta Variable Speed Drive IP66 - 4.0KW1 x DDMP 10-08 1F 1000W M6A2 DA51 x Duct Termination with Mesh - 200mm1 x EFSC-3N- Single Phase Speed Control1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x Vent Axia T-Series Wall Model TX9WL1 x Purlin Box 800 for RAW Cowls1 x Elta HXP 800mm 6-Pole (Three Phase)2 x MWS 5 – Transformer Controller With Motor Protection Unit1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x IR24-P - Presence detector5 x HXP450/6-1 - 6 Pole - Single Phase3 x RDH Flange - 03151 x CBM 9/7 4p 420W RE-VR1 x CBT-80N Centrifugal2 x Duct Termination with Mesh - 250mm1 x Helios PA10 Speed Potentiometer1 x Control switch - CR1502 x Duct Termination with Mesh - 315mm1 x RDH Flange - 04001 x VA 9/2 T - High Temp Axial Fan,1 x Elta Standard Ambient Flexible Connector - 800mm1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x 7 Day Programmable TIMECLOCK2 x Rectangular Airbrick Adaptor1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase1 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x Vortice Quadro Micro 100 IT HCS - Humidistat/Timer Version1 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x TD ECOWATT 160/100 Inline Duct Fan - TD-ECOWATT2 x ACOAS/ AC/EC Auto Changeover 8Amp1 x CBP-9/7-RC1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x DDMP 09/07 Mounting Flange1 x MWS-75 Transformer controller with TK -7.5A1 x JMS-5601 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 150mm1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX400/4-3 Three Phase1 x EM30-24 Control Panel Commissioning Service1 x Biflow SB250-CON2-3 - High Temperature Bifurcated Fan1 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x Soaker Sheet to suit RA8001 x DA 9/7 N2T2 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/4-3 Three Phase1 x Chaysol DA 9/9 3 speed1 x Chaysol DA 7/7 NT (V600002)2 x REB Ecowatt Speed Control - REB-ECO1 x Flanged Damper 019-0500-STD1 x Elta Quietflow Twin SQT125-1ECL1 x CBS-130 Outlet Flange for CBT-1302 x 110 x 54mm Round to Rectangular Adaptor - Long1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan1 x Potentiometer EGH 01 - for DDMP Fans1 x Access Door for Circular Duct - 250 x 150 - SIZE 151 x CFI Lite 600 Carbon Filter2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x CO2 Room Sensor - CO2-R1 x SPI-200 C Iris damper1 x FU 22 25 Frequency Inverter1 x Jet Fan IV 100-4 IE3 Induction Fan1 x ELTA - Single Phase Transformer 4amps1 x Blast Gate (Manual) 355mm1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Transformer Speed Control - RTRE- 3.0Amp1 x FFR 355 Filter Cassette2 x Elta Variable Speed Drive IP66 - 7.5KW1 x Transformer Speed Control - RTRE- 7.0Amp1 x Speed Controller - REB2.5-N1 x FlameProof Plate Axial Fan - Single Phase - 15 inches - Eexd IIC T4 -4pole4 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans3 x Transformer speed controller - ATC1 - 1.5 Amps1 x Elta SCP500/4-1AC - IP551 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 1100watt 6PT (Closed Motor)1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Chaysol Da 12/12 CMAL - 1100W 6 Pole - Closed Motor - Three Phase1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Chaysol Da 15/11 CMAL - 2200W 6 Pole - Closed Motor - Three Phase1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Backdraught Shutters 039-SFSV-63/711 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x CBP-9/9 LOW PRESSURE CENTRIFUGAL FAN1 x Vent Axia ACM 125 inline mixed flow duct fan1 x Two Speed Switch - REGUL-21 x Elta Standard Ambient Flexible Connector - 450mm1 x 220x90mm x 1m Insulated Rectangular Duct1 x Run On Timer - 5s - 4hrs - RT5A1 x EM30-24 Electro-Mechanical Control Panel1 x Side Withdrawal Casing - 1H x 1W - To suit 100 Panel and 292 HEPA1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x GENIOX 11 Internal Mounted Unit1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x RUCK MTP 30, Stepped Speed control1 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x RF-100 M5 Grade Filter for S&P MVHR units1 x Helios SVR EC 160 B – SlimVent Centrifugal Fan Box1 x Spiral end cap - 80mm1 x Kitchavent 2000 Odour control System - 18152521 x GXC6EC - High Performance Extract Fan1 x Slimline 150 High Efficiency, Low Profile Heat Recovery Unit1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 200mm1 x Duct Mounted Filter Box With G2 paper AND Metal Washable Filter - 125mm1 x Systemair Save Connect 2.0 Internet Module1 x RTRD - Three Phase Speed Controller - 14 Amp1 x 204x60mm Rectangular to 100mm Round Adaptor1 x Impeller Side Guard - 450mm1 x RDS 11 Helios Transformer Controller With Motor Protection1 x Duct Termination with Mesh - 710mm1 x Helios HQW-355/4 - IP55
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 505.88

Delivered super promptly yesterday, next day. Only just fitt...