• UPC/EAN:8413893602077
  • Model:CAB-200

Acoustic Box Fans (Inline) - CAB-200

£ 418.29 (excl. VAT)

£ 501.95 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 921.6 m3/h
Max Power: 205 Watts
Max Current: 0,70 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 22 Kgs
Part Num: 5113812400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-200 Data Sheet


CAB Series Data Sheet

2 x CBA-60 Inlet Flange for CBT-601 x MEV Spider Wireless boost Switch - MEV-SWH-W1 x Helios HQW-250/4 - IP553 x PIR Sensor - PIR42 x CBM 9-9 550w 4P VR (Open Motor)4 x DDMP 12-12 3F 1810W M6A4 DG04 x QPTW 250C Acoustic Twin Fan with Controller4 x Transformer Speed Control - RTRE- 1.5Amp1 x TD Mixvent 800/200 EEXEIIT34 x MTS10- extractor fan 3 step switch1 x Transformer Speed Control - RTRE- 7.0Amp1 x MTP 10, 10K, Speed control4 x Speed Controller - REB82 x UB47- Universal Insulated Terminal3 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR2 x TG-K Duct temperature sensor1 x Vent Axia Silent 100T (TIMER)5 x Speed Controller - REB13 x Elta 6 Amp Electronic single phase speed controller.3 x VTR 300 STD Filter Kit1 x Quietflow SQS100-1ECL - Centrifugal Box Fan1 x Elta - Room Sensor - Temp/Humid/C021 x PIR Sensor - PIR22 x DEF-CBM-RE-7 - Protection Guard1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3002 x EBM-Papst D4E225-BC01-17 Double inlet3 x Speed Controller - REB2.5-N1 x ENV 100 12v transformer SELV3 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR3 x DDMP 10-08 3F 2210W M6A4 DG03 x Mini Diffuser - 100mm1 x Compact SCD450/4-1AC3 x CBT-100N Centrifugal1 x SAVE VSR 300 heat recovery unit4 x TUNE-R-200-3-M4 - Control Damper1 x AXC TP - 100mm Plastic Centrifugal Inline Fan1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan2 x AIRVENT speed control - AIR4019611 x LFBR 315 G4 - Helios Inline Filter Box - 315mm2 x RD35S-4DW.6W.3L - 122297 (Three Phase)2 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan2 x REE-2 Electronic Speed Controller3 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x Single Deflection Grille 400mm with OBD damper2 x Duct Termination with Mesh - 355mm1 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.4 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Vent Axia SC5001 - Speed controller2 x EBM-Papst D3G133-BF05-14 Double inlet1 x Vertical Cowl and Fan (Single Phase) - RAV400-4-12 x CO2 Room Sensor - CO2-R1 x Contactor Interface Station - CI92 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR4 x ACO8AC/EC AutoChangeover panel1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Speed controller with Reverse - REB-1R2 x Helios TSW 1.5 Amp Transformer speed controller3 x SPI-100 C Iris damper2 x Silentub - STUB 1004 x Flat Roof Terminal -OFT 5 - Asphalt2 x Transformer Speed Control - RTRE- 5.0Amp5 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x Comefri - TLZ 450 R - High Performance Scroll Fan1 x EC6H - Reversible Group Fan Electronic Controller3 x Silent 100 Window Kit - windowS2 x 100mm Round Connector with Damper2 x Helios RR-250-C Centrifugal inline fan2 x HIMF - Mixed Flow Fan 100mm Inline Fan3 x CPTA-E Flush mounted PIR sensor with timer2 x DS-2 2-Speed Switch (3 Phase)2 x TG-K3/NTC10-01 - Duct temperature sensor2 x VTR 500 STD Filter Kit2 x CBM 12-12 1100w 6P Three Phase2 x TD160-NT Mixvent - 100mm - TD160 Timer1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH2 x TUNE-R-200-3-M2 - Control Damper3 x CBA-100 Inlet Flange for CBT-1001 x Round ceiling diffuser 200mm2 x Duct Termination with Mesh - 450mm2 x Flakt Woods ME 1.6 speed controller 6.0amp - EA9011592 x VEKA INT 2000/15.0-L1 EKO1 x MWS 3 – Transformer Controller With Motor Protection2 x CSB-60 Centrifugal fan3 x Duct Termination with Mesh - 100mm2 x Silent 300 CZ Design PLUS Extractor Fan1 x DA9/9-NT2 x Helios ESA-1 Surface mounted Speed Control 1amp2 x CBS-100 Outlet Flange for CBT-1001 x Singleflow SSDL315-1EC1 x Round ceiling diffuser 250mm1 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven2 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x FRQ5-10A Inverter Speed controller1 x ACO3TO-ADS-VFC-7.1A1 x RUCK MTP 20, 10K, Speed control2 x WSD 100 (1060x1060x70)1 x Binks Bullows - Spray Booth Filter1 x DEF-140T Inlet Guard for the CBT-100N1 x Elta Variable Speed Drive IP66 - 4.0KW1 x SD-MUB Vibration pad set1 x Systemair Save Connect 2.0 Internet Module2 x TEM 075 - 5 Speed Transformer Speed Control2 x Vortice Quadro Micro 100 I - Standard Version1 x Speed Controller - REB1-N1 x Polyurethane Foam Media - 10PPI - Filter Media Sheets - Size: 2000mm x 1000mm1 x TecFire Intumescent Damper - Rectangular 400x400mm1 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)1 x Envirovent 4 Way Remote Control Switch - SWHBKRF-41 x Transformer 5 Speed Controller - ATC1-10TK2 x MWS 5 – Transformer Controller With Motor Protection Unit
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...