• UPC/EAN:8413893602077
  • Model:CAB-200

Acoustic Box Fans (Inline) - CAB-200

£ 418.29 (excl. VAT)

£ 501.95 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 921.6 m3/h
Max Power: 205 Watts
Max Current: 0,70 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 22 Kgs
Part Num: 5113812400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-200 Data Sheet


CAB Series Data Sheet

1 x DDMP 12-12 3F 1810W M6A4 DG01 x CBT-100N Centrifugal1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x ACO8AC/EC AutoChangeover panel1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Elta Variable Speed Drive IP66 - 1.5KW1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x DDMP 10-10 1F 1000W M6A2 DA51 x DDMP 12-12 3F 5700W M6M0 DG71 x ELTA - Three Phase Transformer 3amps1 x RUCK MTP 20, 10K, Speed control1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan2 x DDMP 12-09 1F 1800W M6A4 DA82 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x DDMP 10-08 FLANGE2 x CBT-130N Centrifugal1 x Nicotra RDH G2E7-04502 x CBM 7/7 147w 4P RE-VR1 x SQUARE MIXED FLOW FAN - MFQ 560mm (Three Phase)1 x Helios ESA-1 Surface mounted Speed Control 1amp2 x Duct Termination with Mesh - 150mm1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x CBA-130 Inlet Flange for CBT-1301 x CBT-130N Centrifugal ATEX II 2G Exd IIB T42 x DDMP 10-08 1F 1000W M6A2 DA51 x RDH Flange - 03151 x CBM 9/7 4p 420W RE-VR2 x DPD 12PM Delivery Surcharge1 x EHB 160 1.0kw - Helios Electric Heater Battery with Control and Sensor.3 x Duct Termination with Mesh - 250mm1 x 125mm Round Connector with Damper1 x Chaysol DA 9/9 3 speed1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x Duct Termination with Mesh - 500mm1 x DDMP 12-12 1F 1800W M6A4 DA81 x RDH Flange - 02501 x RDH Flange - 04002 x Biflow SB250-CON2-3 - High Temperature Bifurcated Fan6 x HXP450/6-1 - 6 Pole - Single Phase1 x VA 9/2 T - High Temp Axial Fan,2 x Universal Pipe Fixing Clip1 x RDH Flange - 04501 x Vent Axia W300310 Controller Electronic 1.5A2 x DDMP 12-09 FLANGE1 x Duct Termination with Mesh - 200mm1 x Helios PA10 Speed Potentiometer1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x Speed Controller - REB101 x DDMP 10-08 3F 2210W M6A4 DG01 x Transformer Speed Control - RTRE- 7.0Amp1 x REB-CVF 0-10v Controller1 x FLEX CONNECTOR FOR MFQ-560 FAN1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x CS2 Current Switch2 x Helios HQW-200/2 - IP551 x Transformer Speed Control - RTRE- 3.0Amp1 x SDD-U Anti Vibration Pads1 x 220x90mm x 1m Insulated Rectangular Duct1 x RD31S-4DW.6Q.AL - 121303 (Three Phase)1 x EC Trickle and boost module - IP561 x CBA-100 Inlet Flange for CBT-1001 x CBS-100 Outlet Flange for CBT-1001 x Spiral Ducting 1 meter - 200mm1 x TDP-D Pressure Sensor with Display1 x Rectangular Airbrick Adaptor1 x Electrostatic Precipitator - 1H x 3W1 x Contra Rotating TCBBx2-630 Cased Axial - Single Phase - IP65 - Soler & Palau1 x KRJ - 160 Inlet Guard for CBB/CBT fans1 x DDMP 12-12 FLANGE1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x CBM 12/9 CM/AL 1100W 6PT - Closed Motor1 x Helios VARW 450/4 - TK1 x Acoustic Box Fans (Inline) - CAB-355 RE1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x PML230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x Chaysol da 9-7 - 3 Speed1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x DDMP 10-10 FLANGE1 x Kitchavent 2000 Odour control System - 18152521 x RD31S-4EW.6Q.AL - 122296 (Single Phase)1 x MEV300/160 Wireless Boost Switch - SWHWMEV
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...