• UPC/EAN:8413893602077
  • Model:CAB-200

Acoustic Box Fans (Inline) - CAB-200

£ 418.29 (excl. VAT)

£ 501.95 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 921.6 m3/h
Max Power: 205 Watts
Max Current: 0,70 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 22 Kgs
Part Num: 5113812400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-200 Data Sheet


CAB Series Data Sheet

2 x Transformer Speed Control - RTRE- 7.0Amp1 x ELM 18 EX Flexible Cuff for ERM 183 x Speed Controller - REB82 x CBM 9-9 550w 4P VR (Open Motor)2 x DDMP 10-08 3F 2210W M6A4 DG04 x QPTW 250C Acoustic Twin Fan with Controller3 x TG-K Duct temperature sensor1 x Helios HQW-315/4 - IP551 x MEV Spider Wireless boost Switch - MEV-SWH-W3 x Elta - Room Sensor - Temp/Humid/C025 x Duct Termination with Mesh - 355mm3 x Compact SCD450/4-1AC3 x Elta Variable Speed Drive IP66 - 1.5KW2 x AXC TP - 100mm Plastic Centrifugal Inline Fan1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Elta Wall Cowl SWC35/405 x Speed Controller - REB13 x Elta 6 Amp Electronic single phase speed controller.1 x Elta Wall Cowl SWC45/505 x MTS10- extractor fan 3 step switch3 x Transformer Speed Control - RTRE- 1.5Amp2 x Mini Diffuser - 100mm1 x Jet Cowl - 315mm2 x LFBR 315 G4 - Helios Inline Filter Box - 315mm5 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR3 x CBM 12-12 1100w 6P Three Phase2 x Vertical Cowl and Fan (Single Phase) - RAV400-4-11 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x EBM-Papst D4E225-BC01-17 Double inlet3 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan2 x TUNE-R-200-3-M4 - Control Damper3 x VTR 300 STD Filter Kit3 x Duct Termination with Mesh - 100mm1 x Single Deflection Grille 400mm with OBD damper3 x Egg Crate Grille with Dust panel filter 1 inch- 595x5952 x CBA-60 Inlet Flange for CBT-602 x CSB-60 Centrifugal fan2 x Flakt Woods ME 1.6 speed controller 6.0amp - EA9011592 x CO2 Room Sensor - CO2-R4 x Duct Termination with Mesh - 450mm3 x AIRVENT speed control - AIR4019614 x Helios RR-250-C Centrifugal inline fan2 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan2 x DEF-CBM-RE-7 - Protection Guard2 x Comefri - TLZ 450 R - High Performance Scroll Fan3 x Multi Input Run On Timer - 0 - 20min - CFCU2 x Speed Controller - REB1-N2 x Electrostatic Precipitator - 1H x 3W1 x AXC TP - 150mm Plastic Centrifugal Inline Fan2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x Transformer 5 Speed Controller - ATC1-4TK5 x CBT-100N Centrifugal3 x Round ceiling diffuser 250mm4 x ACO8AC/EC AutoChangeover panel1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH4 x Helios ESA-1 Surface mounted Speed Control 1amp2 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.4 x Flat Roof Terminal -OFT 5 - Asphalt2 x TecFire Intumescent Damper - Rectangular 400x400mm2 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven2 x Round ceiling diffuser 200mm3 x RTRD - Three Phase Speed Controller - 2 Amp1 x RDS 1 Helios Transformer Controller With Motor Protection3 x SAVE VSR 300 heat recovery unit2 x RD35S-4DW.6W.3L - 122297 (Three Phase)3 x Elta SPA500/4-1AC - IP543 x Speed Controller - REB2.5-N3 x SPI-100 C Iris damper2 x Duct Termination with Mesh - 400mm3 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR3 x DDMP 12-12 3F 5700W M6M0 DG74 x 100mm Round Connector with Damper4 x CPTA-E Flush mounted PIR sensor with timer3 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x VKS 355-500 Automatic shutter2 x CBB-60N Centrifugal3 x CBA-100 Inlet Flange for CBT-1001 x Elta Variable Speed Drive IP66 - 0.75KW1 x Quietflow Twin SQTDCV250-1ECL2 x Elta Variable Speed Drive IP66 - 5.5KW2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase2 x Contactor Interface Station - CI91 x TD Mixvent 1100/250 EEXEIIT34 x Helios HQW-355/4 - IP552 x CFI In-line 150 - Carbon Filter3 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x FU 22 25 Frequency Inverter4 x ELTA - Three Phase Transformer 3amps2 x Silentub - STUB 1002 x WSD 100 (1060x1060x70)1 x SDD-U Anti Vibration Pads3 x Elta SCP400/4-1AC - IP552 x TUNE-R-200-3-M2 - Control Damper1 x Duct Termination with Mesh - 150mm1 x CBM Low Pressure Centrifugal Fan - CBM 10/8 4 Pole 373watt CVR1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x Duct Termination with Mesh - 250mm3 x Speed Controller - REB163 x DDMP 10-10 1F 1000W M6A2 DA52 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)2 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)2 x Transformer Speed Control - RTRE- 5.0Amp1 x DDMP 12-12 1F 1800W M6A4 DA82 x DPD 12PM Delivery Surcharge2 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 1100watt 6PT (Closed Motor)1 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit2 x ACO3TO-ADS-VFC-7.1A2 x CBS-100 Outlet Flange for CBT-1001 x MWS 3 – Transformer Controller With Motor Protection2 x Easy-fix termination kit - High Rise Ventilator - EFT2 x DS-2 2-Speed Switch (3 Phase)1 x Quietflow SQS100-1ECL - Centrifugal Box Fan1 x Vortice Quadro Micro 100 IT HCS - Humidistat/Timer Version2 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x 220x90mm x 1m Insulated Rectangular Duct1 x SD-MUB Vibration pad set1 x Speed Controller - REB31 x DDMP 09/09 Mounting Flange1 x FRQ5-4A V2 Inverter Speed Controller1 x RDH Flange - 03152 x Elta Turboflow-TF - 450mm - Single phase2 x DDMP 12-09 1F 1800W M6A4 DA81 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan2 x Transformer Speed Control - RTRE- 3.0Amp1 x Vent Axia SC5001 - Speed controller1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged4 x HXP450/6-1 - 6 Pole - Single Phase1 x Remote controller FLEX - for VEKO INT1 x Helios TSW 7.5 Amp Transformer speed controller1 x FFR 355 Filter Cassette1 x FRQ5-10A Inverter Speed controller1 x CBP-18/18-RC Belt Driven Centrifugal Fans1 x VEKA INT 2000/15.0-L1 EKO2 x Flanged Damper 019-0560-STD1 x MWS-75 Transformer controller with TK -7.5A1 x DEF-140T Inlet Guard for the CBT-100N1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x RDH Flange - 02501 x RUCK MTP 20, 10K, Speed control1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x TD ECOWATT 160/100 Inline Duct Fan - TD-ECOWATT1 x 125mm Round Connector with Damper1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x Elta Variable Speed Drive IP66 - 4.0KW1 x SQUARE MIXED FLOW FAN - MFQ 560mm (Three Phase)1 x REU 3amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Silent 300 CZ Design PLUS Extractor Fan
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 505.88

Delivered super promptly yesterday, next day. Only just fitt...