• UPC/EAN:8413893602077
  • Model:CAB-200

Acoustic Box Fans (Inline) - CAB-200

£ 418.29 (excl. VAT)

£ 501.95 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 921.6 m3/h
Max Power: 205 Watts
Max Current: 0,70 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 22 Kgs
Part Num: 5113812400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-200 Data Sheet


CAB Series Data Sheet

1 x Run On Timer - 5s - 4hrs - RT5A2 x Helios ZNE Electronic Fan Overrun Timer2 x Push Timer Switch - ZA42 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Time Delay Unit - DT20B1 x 7 Day Programmable TIMECLOCK1 x TTC-2000 Three phase electric heater controller1 x EC-Vent control board1 x Elta ACO Panel 149-ACO14E1 x CONTROL ECOWATT - Basic1 x ACO 149-ACO1/EDV1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x EM30-24 Electro-Mechanical Control Panel1 x EC-Vent Room Unit2 x Systemair Save Connect 2.0 Internet Module1 x Elta ACO Panel 149-ACO18B1 x EM30-24 Control Panel Commissioning Service2 x Vent Axia ACM 150 inline mixed flow duct fan1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Easy-fix termination kit - High Rise Ventilator - EFT1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Elta Wall Cowl SWC56/631 x Elta Wall Cowl SWC45/501 x GRA-100 External Grill by S&P1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x Elta Louvre Shutter - 400mm2 x Remote Timer Control - 13512 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Jet Cowl - 315mm2 x Airvent ceiling fan controller3 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan3 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan2 x Helios TSW MCB Amp Transformer speed controller2 x Vent Axia ACM 100 inline mixed flow duct fan2 x Isolator Switch - ISOSW1 x Vent Axia ACM 125 inline mixed flow duct fan2 x Elta 6 Amp Electronic single phase speed controller with TK3 x Single phase speed controller by auto-transformer - RMB 1.5 Amp2 x WS - Reversing Switch from Helios Fans1 x Electronic extractor fan speed controller - FSC 1.53 x Transformer (silent) speed controller - RE 3.0 Amp3 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x TG-K Duct temperature sensor1 x Elta 3 Amp Electronic single phase speed controller with TK2 x TG-R room temperature sensor1 x BEAS-control module2 x Elta Variable Speed Drive IP66 - 0.75KW3 x MTP 10, 10K, Speed control2 x Speed Controller - REB11 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3003 x PIR Sensor - PIR41 x SAVE VSR 300 heat recovery unit2 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven2 x Transformer (silent) speed controller - RE 5.0 Amp3 x Speed Controller - REB52 x Helios HQW-315/4 - IP551 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x QPTW 250C Acoustic Twin Fan with Controller1 x CS2 Current Switch1 x TG-K Duct temperature sensor1 x UB47- Universal Insulated Terminal1 x AIRVENT speed control - AIR4019611 x Potentiometer EGH 01 - for DDMP Fans1 x Single Deflection Grille 400mm with OBD damper1 x Mini Diffuser - 100mm3 x Speed Controller - REB1-N1 x Vent Axia Silent 100T (TIMER)1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x IR24-P - Presence detector4 x PIR Sensor - PIR22 x TG-K3/NTC10-01 - Duct temperature sensor1 x VTR 500 STD Filter Kit1 x Silent 100 Window Kit - windowS2 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE2 x Vent Axia ACM 200 inline mixed flow duct fan2 x MWS 1.5 – Transformer Controller With Motor Protection2 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR2 x Multiflow SMB550/4-1AC1 x CPTA-E Flush mounted PIR sensor with timer1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan2 x Speed controller with Reverse - REB-1R2 x Transformer 5 Speed Controller - ATC1-4TK1 x Remote controller FLEX - for VEKO INT1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x MTS10- extractor fan 3 step switch1 x CBS-60 Outlet Flange for CSB/CBT-601 x Capacitor 2uf for use with the EBM A4E range1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Speed Controller - REB2.5-N1 x DDMP 12-12 3F 1810W M6A4 DG01 x EBM-Papst D3G133-BF05-14 Double inlet1 x CBA-60 Inlet Flange for CBT-601 x MEV Spider Wireless boost Switch - MEV-SWH-W1 x Silentub - STUB 1001 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x CBM 9-9 550w 4P VR (Open Motor)1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x Egg Crate Grille with Dust panel filter 1 inch- 595x595
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...