• UPC/EAN:8413893602077
  • Model:CAB-200

Acoustic Box Fans (Inline) - CAB-200

£ 418.29 (excl. VAT)

£ 501.95 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 921.6 m3/h
Max Power: 205 Watts
Max Current: 0,70 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 22 Kgs
Part Num: 5113812400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-200 Data Sheet


CAB Series Data Sheet

1 x Airvent ceiling fan controller2 x CBT-100N Centrifugal2 x 7 Day Programmable TIMECLOCK1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x CBB-60N Centrifugal1 x Vent Axia ACM 150 inline mixed flow duct fan2 x Systemair Save Connect 2.0 Internet Module2 x CBS-60 Outlet Flange for CSB/CBT-601 x REB-CVF 0-10v Controller1 x Transformer Speed Control - RTRE- 1.5Amp2 x CBA-60 Inlet Flange for CBT-601 x GENIOX 11 Internal Mounted Unit1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x GENIOX 11 Roof Mounted External Unit2 x CS2 Current Switch2 x DDMP 10-08 3F 2210W M6A4 DG02 x Potentiometer EGH 01 - for DDMP Fans1 x CBM 9/7 4p 420W RE-VR2 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x CBP-7/7-RC1 x DDMP 09/07 Mounting Flange2 x DDMP 12-12 3F 5700W M6M0 DG72 x ACOAS/ AC/EC Auto Changeover 8Amp1 x HIMF - Mixed Flow Fan 125mm Inline Fan2 x Envirovent 4 Way Remote Control Switch - SWHBKRF-41 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 125 inline mixed flow duct fan1 x Multiflow SMB550/4-1AC1 x CBM 9-9 550w 4P VR (Open Motor)1 x RSK355 - Back Draught Shutter1 x Speed Controller - REB11 x DDMP 12-12 3F 1810W M6A4 DG01 x UB47- Universal Insulated Terminal1 x GXC6EC - High Performance Extract Fan1 x QPTW 250C Acoustic Twin Fan with Controller1 x Mini Diffuser - 100mm1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x Contactor Interface Station - CI91 x Silentub - STUB 1001 x SAVE VSR 300 heat recovery unit1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x CO2 Room Sensor - CO2-R1 x ACO8AC/EC AutoChangeover panel1 x CBA-100 Inlet Flange for CBT-1001 x TUNE-R-160-3-M2 - Control Damper1 x 100mm Round Connector with Damper1 x VTR 500 STD Filter Kit1 x KBA- Inlet Mounting 2251 x Duct Termination with Mesh - 150mm1 x DDMP 10-10 1F 1000W M6A2 DA51 x CBT-80N Centrifugal1 x CBM 7/7 147w 4P RE-VR1 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x Helios TSW 1.5 Amp Transformer speed controller1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp2 x Envirovent G4 Filter - SL-G4/F71 x Speed Controller - REB51 x Elta 3 Amp Electronic single phase speed controller with TK1 x Electronic extractor fan speed controller - FSC 1.51 x Speed Controller - REB1-N1 x Transformer Speed Control - RTRE- 7.0Amp1 x Silent 100 Window Kit - windowS1 x Transformer Speed Control - RTRE- 5.0Amp1 x DEF-CBM-RE-7 - Protection Guard2 x Binks Bullows - Spray Booth Filter1 x CBB-80N Centrifugal1 x EBM-Papst D3G133-BF05-14 Double inlet1 x Round ceiling diffuser 250mm1 x CBP-9/7-RC1 x DDMP 09-07 1F 1000W M6A0 DA51 x Duct Termination with Mesh - 450mm1 x Chaysol DA 9/9 3 speed1 x DDMP 07/07 Mounting Flange1 x DDMP 12-09 FLANGE1 x Vent Axia W300310 Controller Electronic 1.5A1 x DDMP 12-09 1F 1800W M6A4 DA81 x Round ceiling diffuser 300mm1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Transformer 5 Speed Controller - ATC1-10TK1 x Helios TSW 10 Amp Transformer speed controller1 x Helios TSW MCB Amp Transformer speed controller1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Speed Controller - REB31 x MTP 10, 10K, Speed control1 x PIR Sensor - PIR2
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...