• UPC/EAN:8413893602077
  • Model:CAB-200

Acoustic Box Fans (Inline) - CAB-200

£ 398.37 (excl. VAT)

£ 478.04 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 921.6 m3/h
Max Power: 205 Watts
Max Current: 0,70 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 22 Kgs
Part Num: 5113812400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-200 Data Sheet


CAB Series Data Sheet

1 x DA12/12 Feet1 x Commercial Thermostat - TH161 x DA10/10 Feet1 x DA7/9 Feet1 x 1mtr Insulated Round Ducting - 125mm1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x Differential Pressure Switch - 50 - 500 Pa - IP651 x KVK Slim 355 - Low profile Semi Acoustic Box Fan1 x ELTA - Single Phase Transformer 16amps1 x ZAP 710-63 Plate axial fan1 x Helios HQW-710/6 - IP551 x AL 1000 D4 mounting Feet (Pair)1 x HQD 630/4 EX - ATEX Rated Plate Axial Fan (4-pole)1 x HRST/4-710-20 BPN C Rotorex Sickle bladed fan1 x Elta 2 Amp Electronic single phase speed controller.1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-16000/630 ND - Pack 91 x FSAF450FTX 450 mounting feet (Pair)1 x Soler & Palau - HCBT/4-710/H - IP651 x ELS-GU Flush Mounted Casing1 x COM-31 x AL 710 D4 mounting Feet (Pair)1 x DTV200 - Differential Pressure Switch1 x KVK Silent 355 Centrifugal circular duct fan1 x AL 400 Mounting Feet (Pair)1 x 125mm Insulated 90 Degree Bend1 x Atex Motor Protection Switch - U-EK230E EX1 x CO2 Room Sensor - CO2-R1 x HRT/4-630/25-BPN C1 x 100mm Round Connector1 x Duct Suspension Rings - 150mm1 x Flat Roof Terminal -OFT 5 - EPDM1 x Access Door for Circular Duct - 250 x 150 - SIZE 311 x Blast Gate (Manual) 125mm1 x JETLINE-160 - In Line Centrifugal Duct Fan1 x HRT/4-630/25-APN C21 x 220x90mm 45 Degree Horizontal Bend1 x HRB/6-630-25-BPN1 x Rosenberg DQ 1000-8 plate axial fan1 x Access Door 250mm x 250mm1 x 18M - 80mm PVC flexible ducting1 x Access Door for Circular Duct - 300 x 200 - SIZE 501 x Helios DDF-250 Roof Cowl1 x EBM Papst W3G630-GG97-011 x Flanged Spigot - 355mm1 x Metal Inline Fan - VENT-355N1 x ELTA - Three Phase Transformer 10amps1 x Soler & Palau - HCBT/4-1000/H-X - IP551 x Miniflow SMF Horizontal Roof Cowl SMF131 x ACO 149-ACO1/EDV1 x Elta SCP630-1EC - IP551 x Anti Vibration Duct Suspension Rings - 355mm1 x Helios DDF-400 Roof Cowl1 x TD4000 Mixvent - 355mm1 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x 110 x 54mm Flat Channel Connector1 x 220x90mm 90 Degree Vertical Bend1 x Acoustic Box Fans (Inline) - CAB-2001 x 220x90mm x 1m Low Profile Plastic Ducting - 1 Meter1 x Etaline 355mm E4 011 x CAB-200 ECOWATT Energy Efficient Acoustic Box Fan1 x 110 x 54mm Rectangular Wall Plate1 x Access Door for Circular Duct - 400 x 300 - SIZE 561 x ACCESS DOOR FOR CIRCULAR DUCT 180 X 180 -- 100/125
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...