• UPC/EAN:8413893602077
  • Model:CAB-200

Acoustic Box Fans (Inline) - CAB-200

£ 398.37 (excl. VAT)

£ 478.04 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 921.6 m3/h
Max Power: 205 Watts
Max Current: 0,70 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 22 Kgs
Part Num: 5113812400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-200 Data Sheet


CAB Series Data Sheet

1 x Flanged Spigot - 180mm1 x Helios HQW-400/6 - IP551 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x Female Ducting Connector - 160mm1 x Elta SCP400-1EC - IP551 x SLIMPAK 100 EC BOX FAN - 100mm Energy Efficient Acoustic Box Fan1 x Electronic extractor fan speed controller - FSC 1.51 x Elta Viper SCC Duct Mounted Centrifugal Fan - SCC560-1AC1 x HRT/6-630/25-BPN1 x B-flow Impeller HCBB/T-355mm1 x HRFD 400/4/2 Cased Axial Fan 400mm - 3 Phase1 x DEF-900AN1 x MEV Spider Additional Spigots1 x FU 075 52 Frequency Inverter (IP20)1 x 220x90mm Mounting Clip (Individual)1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x Metal Inline Fan - VENT-200NK1 x PRIO 400 EC, Axial circular duct fan - EC motor1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x Etaline 400mm D4-01 3-phase1 x Helios TSD 5.5 Transformer Speed Control (400v)1 x Duct Split Rings (Pair) -500mm1 x Backdraught Shutters 039-SFSV-63/711 x Belt Drive Cased Axial Fan - 710mm - H version1 x Ancillary Pack for SLC-3151 x Blast Gate (Manual) 100mm1 x JETLINE-125 - In Line Centrifugal Duct Fan1 x Male Ducting Connector - 500mm1 x HD Series Control Damper - 2300mm X 1000mm1 x Helios HQW-560/6 - IP551 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x Elta Standard Ambient Flexible Connector - 315mm1 x HRB/4-350-BPN1 x Ducting 90 Degree Bend - 560mm1 x AL 400 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x Lo-Carbon PUREAIR HOME WITH HEATER BOXED ASSY1 x 220x90mm Double Airbrick Adapter1 x Pressed Ducting Saddle - 450mm1 x CAB-315 ECOWATT Energy Efficient Acoustic Box Fan1 x Elta 10 Amp Electronic single phase speed controller.1 x Helios HQW-630/4 - IP551 x Metallic Kitchen Extractor - CK35N1 x Helios HQW-355/4 - IP551 x Elta SLC355/4-3AC - IP551 x CAB-400 ECOWATT Energy Efficient Acoustic Box Fan1 x FU 22 25 Frequency Inverter1 x High Temperature Flexible Connector - 063-800-PU2501 x Frequency converter FU 075 14 - IP661 x Singleflow SSDL315-1EC1 x CBMT/Q 200-30 1 HEATER KIT1 x HRFD 400/4 EX Atex Rated 400mm Cased Axial Fan 400v1 x Belt Drive Cased Axial Fan - 800mm - L version1 x Acopel F400-280/1601 x Spiral Duct Grille Termination - 315mm1 x Etaline 400mm -EC1 x M8 x 3M Z/P Studding1 x Impeller Side Guard - 630mm1 x STF1 Oscillating Tower Fan1 x CBMT/Q 160-15 1 HEATER KIT1 x Flanged Spigot - 200mm1 x Economy Airvent 100mm Fan with Timer & Shutter1 x Curved boot - 200mm1 x Elta Qube SQU Centrifugal Box Fan - SQU1/4-3HT - Three Phase1 x Curved boot - 150mm1 x FU 15 16 Frequency Inverter1 x HRST/6-800/28-AQ C21 x Ducting 90 Degree Bend - 180mm1 x GB-WSG 355 External Weather Louvers for the Giga-Box Fans - 355mm1 x Ancillary Sealing Band - 200mm1 x Flexible PVC Ducting - 110x541 x Ducting 45 Degree Bend - 560mm1 x Flexible PVC Ducting - 220x901 x Soler & Palau - HCBT/4-900/H - IP551 x CAB-355 ECOWATT Energy Efficient Acoustic Box Fan1 x 220x90mm x 2m Low Profile Plastic Ducting - 2 Meter1 x Duct Suspension Rings - 160mm1 x Spiral Ducting 1 meter - 100mm1 x Soler & Palau TCBT/2-315/H-B E70 - IP551 x B-flow Impeller HCBB/T-450mm1 x Elta SLC500/4B-1AC - IP551 x Insulated extract Plenum 6+11 x Quietflow SQS315-1ECL - Centrifugal Box Fan1 x Spiral Duct Grille Termination - 160mm1 x CBMT/Q 100-06 1 HEATER KIT1 x GB-WSD 400 Weather Protection hood for the Giga-Box Fans - 400mm1 x Acopel F400-500/160
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 170.17

Excellent low noise fan, I've got one unit running years and...