• Model:CAB-250N

Acoustic Box Fans (Inline) - CAB-250N

£ 470.94 (excl. VAT)

£ 565.13 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 1185 m3/h
Max Power: 400 Watts
Max Current: 1.73 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 27 Kgs
Part Num: 5113216500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-200 Data Sheet

1 x Speed Controller - REB51 x Remote Timer Control - 13512 x REB-CVF 0-10v Controller1 x CBM 9-9 550w 4P VR (Open Motor)1 x DDMP 12-12 3F 5700W M6M0 DG73 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR2 x DDMP 10-10 1F 1000W M6A2 DA51 x TUNE-R-160-3-M2 - Control Damper1 x Elta SCP400/4-1AC - IP552 x DDMP 10-08 FLANGE2 x 125mm Round Connector with Damper2 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR4 x Duct Termination with Mesh - 250mm1 x Rectangular Airbrick Adaptor2 x IR24-P - Presence detector2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x Duct Termination with Mesh - 400mm2 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x Duct Termination with Mesh - 315mm1 x HIMF - Mixed Flow Fan 125mm Inline Fan2 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x CBB-80N Centrifugal1 x CBT-80N Centrifugal1 x KBA- Inlet Mounting 2501 x KBA- Inlet Mounting 2252 x CBM Low Pressure Centrifugal Fan - CBM 10/8 4 Pole 373watt CVR1 x DA9/9-NT5 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan1 x RF-100 M5 Grade Filter for S&P MVHR units2 x CBS-100 Outlet Flange for CBT-1005 x DDMP 12-12 1F 1800W M6A4 DA81 x VEKA INT 2000/15.0-L1 EKO1 x Vortice Quadro Micro 100 IT HCS - Humidistat/Timer Version1 x DDMP 12-09 1F 1800W M6A4 DA81 x RUCK MTP 20, 10K, Speed control1 x CBA-100 Inlet Flange for CBT-1001 x RDH Flange - 02502 x SDD-U Anti Vibration Pads1 x Helios ZNE Electronic Fan Overrun Timer3 x CBM 7/7 147w 4P RE-VR2 x VTR 500 STD Filter Kit2 x GRA-100 External Grill by S&P1 x Round ceiling diffuser 300mm2 x RDH Flange - 03151 x CBP-7/7-RC1 x Flakt Woods ME 1.3 speed controller 3amp - EA9011581 x Elta Quietflow Twin SQT125-1ECL1 x TecFire Intumescent Damper - Rectangular 400x400mm3 x Universal Pipe Fixing Clip1 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR1 x Potentiometer EGH 01 - for DDMP Fans2 x DDMP 09-07 1F 1000W M6A0 DA52 x KAD-225-F400 Rectangle Flexible Connector2 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x VA 9/2 T - High Temp Axial Fan,1 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x CCpro 40 (1CC9402) Long Casing Extension1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase1 x DPD 12PM Delivery Surcharge4 x 220x90mm x 1m Insulated Rectangular Duct1 x 204x60mm x 1m Insulated Rectangular Duct1 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan2 x HXP450/6-1 - 6 Pole - Single Phase1 x FU 22 25 Frequency Inverter1 x KBA- Inlet Mounting 1801 x Quietflow SQS250-1ECL - Centrifugal Box Fan3 x DDMP 10-08 1F 1000W M6A2 DA51 x CBP-9/7-RC1 x CBS-130 Outlet Flange for CBT-1301 x Vent Axia Trickle & Boost Switch2 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Flanged Damper 019-0500-STD1 x Biflow SB250-CON2-3 - High Temperature Bifurcated Fan1 x EHB 160 1.0kw - Helios Electric Heater Battery with Control and Sensor.3 x ELTA - Three Phase Transformer 3amps1 x Backdraught Shutters 039-SFSV-63/711 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase1 x Spiral end cap - 80mm1 x SQUARE MIXED FLOW FAN - MFQ 560mm (Three Phase)1 x Chaysol DA 9/9 3 speed1 x Elta Quietflow Twin SQT200-1ECL1 x Spiral Ducting 1 meter - 200mm1 x KBD- outlet mounting flange for CRMT 3551 x Elta Turboflow-TF - 450mm - Single phase1 x Air Quality Sensor - AQS1 x DDMP 09/07 Mounting Flange1 x Run On Timer - 5s - 4hrs - RT5A1 x Nicotra RDH G2E7-04501 x Duct Termination with Mesh - 200mm2 x ELTA - Single Phase Transformer 2amps1 x Elta SLC560/4C-3AC - IP552 x Vent Axia T-Series Wall Model TX9WL1 x ADH E0-450 Flange - 0450 ADHE/RDHE1 x Flat Roof Terminal -OFT 5 - EPDM1 x FAST-TRACK RANGE 75mm - Seal Ring (1 bag of 10)1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 1100watt 6PT (Closed Motor)1 x Vent Axia T-Series Wall Model TX6WL
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...