• Model:CAB-250N

Acoustic Box Fans (Inline) - CAB-250N

£ 470.94 (excl. VAT)

£ 565.13 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 1185 m3/h
Max Power: 400 Watts
Max Current: 1.73 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 27 Kgs
Part Num: 5113216500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-200 Data Sheet

1 x 204x60mm Insulated Rectangular Vertical 90° Bend3 x SPI-100 C Iris damper1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x DDMP 07/07 Mounting Flange1 x CFI In-line 150 - Carbon Filter2 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)1 x Duct Termination with Mesh - 100mm5 x Helios HQW-355/4 - IP551 x TD160-NT Mixvent - 100mm - TD160 Timer3 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x Comefri - TLZ 560 R - High Performance Scroll Fan1 x CCpro 40 (1CC9402) Long Casing Extension3 x Duct Termination with Mesh - 150mm2 x 100mm Round Connector with Damper1 x CBA-100 Inlet Flange for CBT-1004 x Helios ESA-1 Surface mounted Speed Control 1amp2 x KBA- Inlet Mounting 2253 x Flat Roof Terminal -OFT 5 - Asphalt2 x ACO3TO-ADS-VFC-7.1A1 x Flakt Woods ME 1.6 speed controller 6.0amp - EA9011592 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR4 x Elta SCP400/4-1AC - IP551 x WSD 100 (1060x1060x70)1 x Round ceiling diffuser 250mm3 x ACOAS/ AC/EC Auto Changeover 8Amp2 x Quietflow Twin SQTDCV250-1ECL1 x Flakt Woods ME 1.1 speed controller 1amp - EA9011571 x Multiflow SMB550/4-1AC3 x CBM 7/7 147w 4P RE-VR1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3002 x KAD-225-F400 Rectangle Flexible Connector3 x Duct Termination with Mesh - 450mm1 x VTR 500 STD Filter Kit1 x Helios ZNE Electronic Fan Overrun Timer3 x CBS-100 Outlet Flange for CBT-1001 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR3 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x KBA- Inlet Mounting 1804 x DDMP 10-10 1F 1000W M6A2 DA52 x CBB-60N Centrifugal1 x RUCK MTP 20, 10K, Speed control2 x DDMP 12-12 3F 5700W M6M0 DG72 x Potentiometer EGH 01 - for DDMP Fans2 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Vent Axia Trickle & Boost Switch1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase1 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan1 x Twinflow STDL315-1EC1 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm1 x TUNE-R-200-3-M3 - Control Damper1 x Duct Termination with Mesh - 400mm
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...