• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 929.38 (excl. VAT)

£ 1,115.26 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

1 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x Remote controller FLEX - for VEKO INT1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Helios TSW 7.5 Amp Transformer speed controller2 x Transformer 5 Speed Controller - ATC1-4TK1 x RDS 11 Helios Transformer Controller With Motor Protection1 x RDS 1 Helios Transformer Controller With Motor Protection2 x RTRD - Three Phase Speed Controller - 2 Amp1 x Temperature Controller - EDTW2 x Helios TSW 1.5 Amp Transformer speed controller1 x Transformer speed controller - ATC1 - 1.5 Amps3 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x ERR 20/1 Centrifugal inline fan1 x GX6EC - High Performance Extract Fan1 x RTRDU 3 Phase Trickle & Boost 5 Step Speed Controller - 2 Amps3 x Electronic extractor fan speed controller - FSC 1.52 x Speed Controller - REB31 x Transformer (silent) speed controller - RE 1.5 Amp1 x Transformer (silent) speed controller - RE 5.0 Amp2 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x Transformer Speed Control - RTRE- 5.0Amp2 x Elta Variable Speed Drive IP66 - 0.75KW2 x Transformer Speed Control - RTRE- 7.0Amp1 x REB-CVF 0-10v Controller2 x Skyflow SSR Horizontal Roof Cowl SSR80B2 x MTP 10, 10K, Speed control2 x Elta Variable Speed Drive IP66 - 2.2KW1 x MTS10- extractor fan 3 step switch2 x Speed Controller - REB2.5-N3 x MWS 1.5 – Transformer Controller With Motor Protection3 x WS - Reversing Switch from Helios Fans2 x Elta 3 Amp Electronic single phase speed controller with TK4 x Transformer (silent) speed controller - RE 3.0 Amp2 x Elta 10 Amp Electronic single phase speed controller.2 x Helios HQW-200/4 - IP553 x CBS-60 Outlet Flange for CSB/CBT-601 x Speed Controller - REB101 x Rectangular Airbrick Adaptor3 x Helios HQW-315/4 - IP552 x Speed Controller - REB1-N2 x CBA-60 Inlet Flange for CBT-603 x PIR Sensor - PIR22 x PIR Sensor - PIR41 x UB47- Universal Insulated Terminal2 x DEF-800AN1 x Contactor Interface Station - CI91 x CBT-100N Centrifugal1 x VEKA INT 2000/15.0-L1 EKO1 x ACO8AC/EC AutoChangeover panel1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x CO2 Room Sensor - CO2-R1 x Duct Termination with Mesh - 355mm1 x CBA-100 Inlet Flange for CBT-1001 x AXC TP - 100mm Plastic Centrifugal Inline Fan1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x Helios ESA-1 Surface mounted Speed Control 1amp1 x Duct Termination with Mesh - 100mm1 x CBT-80N Centrifugal1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x SDD-U Anti Vibration Pads1 x Duct Termination with Mesh - 200mm1 x VA 9/2 T - High Temp Axial Fan,1 x FU 15 16 Frequency Inverter1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x Helios SVR EC 160 B – SlimVent Centrifugal Fan Box1 x HXP450/6-1 - 6 Pole - Single Phase1 x Ancillary Pack for SLC-900 for SLC900/4A-3AC and SLC900/8-3AC1 x Elta SCP315/4-1AC - IP551 x Spiral Ducting 1 meter - 200mm1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x TUNE-R-560-2-M1 - Control Damper1 x VentAxia Solo Plus TM - Centrifugal Extract Fan1 x RSK400 - Back Draught Shutter2 x TDP-D Pressure Sensor with Display1 x RTRD - Three Phase Speed Controller - 7 Amp2 x Speed Controller - REB61 x FRQ-10A V2 Inverter Speed controller1 x Multi Input Run On Timer - 0 - 20min - CFCU3 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan2 x Transformer 5 Speed Controller - ATC1-2TK1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x RDS 2 Helios Transformer Controller With Motor Protection1 x MWS 5 – Transformer Controller With Motor Protection Unit2 x Helios TSW MCB Amp Transformer speed controller2 x MV-B Dual Switch for use with Helios HQW plate fans,1 x Temperature Fan Speed Controller - ATCP4-FLS2 x MWS 3 – Transformer Controller With Motor Protection1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x Insulated extract Plenum 8+11 x Insulated extract Plenum 6+12 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT2 x Helios HQW-630/4 - IP552 x Skyflow SSR Horizontal Roof Cowl SSR31/35B2 x KMBI 250 Connector rectangular/circular to install on the discharge of CMT1 x Transformer Speed Control - RTRE- 1.5Amp2 x Vent Axia Silent 100T (TIMER)1 x Speed Controller - REB12 x TD Mixvent 800/200 EEXEIIT31 x Silent 100 Window Kit - windowS1 x QPTW 250C Acoustic Twin Fan with Controller1 x DDMP 12-12 3F 1810W M6A4 DG04 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x Vent Axia ACM 150 inline mixed flow duct fan1 x MWS-75 Transformer controller with TK -7.5A2 x Vent Axia ACM 200 inline mixed flow duct fan1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Elta 6 Amp Electronic single phase speed controller with TK1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x RR EC 160 Centrifugal inline fan - Energy Efficient Motor2 x FRQ5-4A V2 Inverter Speed Controller1 x CBM 9-9 550w 4P VR (Open Motor)1 x Elta 3 Amp Electronic single phase speed controller.1 x Elta Variable Speed Drive IP66 - 4.0KW1 x Elta 6 Amp Electronic single phase speed controller.1 x KKS 100 silencer-section - For use with the MUB 100 size Fans.1 x Elta - Room Sensor - Temp/Humid/C022 x Elta Variable Speed Drive IP66 - 1.5KW1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x Compact SCD450/4-1AC1 x Round ceiling diffuser 400mm1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x AIRVENT speed control - AIR4019611 x Silentub - STUB 1001 x CFI In-line 425 - Carbon Filter1 x ELM 18 EX Flexible Cuff for ERM 183 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Helios TSW 0.3Amp Compact Transformer speed controller1 x EC6H - Reversible Group Fan Electronic Controller1 x FAST-TRACK RANGE 90mm - Click Ring (1 bag of 10)2 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x CS2 Current Switch2 x Airvent ceiling fan controller1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x ELM 25 EX Flexible Cuff for ERM 251 x Elta Variable Speed Drive IP66 - 7.5KW1 x DEF-CBM-RE-7 - Protection Guard2 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box2 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x Helios HQW-250/4 - IP551 x ELM 20 EX Flexible Cuff for ERM 221 x GXC6EC - High Performance Extract Fan1 x TUNE-R-200-3-M4 - Control Damper1 x FAST-TRACK RANGE 75mm - Adjustable Air Restrictor1 x RDS 7 Helios Transformer Controller With Motor Protection2 x Vent Axia ACM 100 inline mixed flow duct fan2 x Isolator Switch - ISOSW4 x Vent Axia ACM 125 inline mixed flow duct fan3 x RRB- transformer controller1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Two Speed Switch - REGUL-22 x Vent Axia T-Series Controller1 x Remote Timer Control - 13512 x REE-2 Electronic Speed Controller1 x TUNE-R-200-3-M1 - Control Damper2 x SG-200 Fan Guard for the HQW 2001 x Speed Controller - REB81 x Transformer 5 Speed Controller - ATC1-10TK1 x Helios HQW-200/2 - IP551 x Helios TSW 3 Amp Transformer speed controller1 x TG-K3/NTC10-01 - Duct temperature sensor1 x Transformer 5 Speed Controller - ATC1-8TK1 x Push Timer Switch - ZA41 x Systemair Save Connect 2.0 Internet Module1 x DEF-140T Inlet Guard for the CBT-100N1 x Silent 300 CZ Design PLUS Extractor Fan1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x VTR 300 STD Filter Kit
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...