• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 929.38 (excl. VAT)

£ 1,115.26 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

1 x Silent 100 Window Kit - windowS1 x QPTW 250C Acoustic Twin Fan with Controller1 x Speed Controller - REB11 x PIR Sensor - PIR41 x DDMP 10-08 3F 2210W M6A4 DG01 x CBM Low Pressure Centrifugal Fan - CBM 10/8 4 Pole 373watt CVR1 x ACO8AC/EC AutoChangeover panel1 x Helios RR-250-C Centrifugal inline fan1 x Elta Variable Speed Drive IP66 - 0.75KW1 x Elta - Room Sensor - Temp/Humid/C021 x CSB-60 Centrifugal fan1 x Flanged Damper 019-0560-STD1 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan1 x ADH E0-280 Flange - 0280 ADHE/RDHE2 x RDH FLEX-SQUARE - ADH/RDH 04502 x ADH E0-450 Flange - 0450 ADHE/RDHE1 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x Vent Axia T-Series Wall Model TX9WL1 x EC Trickle and boost module - IP561 x RUCK MTP 20, 10K, Speed control1 x CBM Low Pressure Centrifugal Fan - CBM 10/8 6 Pole 373watt VR1 x DDMP 12-12 3F 5700W M6M0 DG71 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x Ancillary Pack for SB-Biflow 315 model1 x EBM-Papst D4E225-BC01-17 Double inlet1 x Electronic extractor fan speed controller - FSC 1.51 x CBA-100 Inlet Flange for CBT-1002 x Nicotra RDH G2E7-04501 x RDH Flange - 02501 x RDH Flange - 04001 x Elta Turboflow-TF - 450mm - Single phase1 x RDH Flange - 04501 x 110 x 54mm Short Rectangular to Round Adaptor male1 x RDH E0-0400 Mounting Feet (pair)1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT400/4-3AC1 x Potentiometer EGH 01 - for DDMP Fans1 x CBS-100 Outlet Flange for CBT-1001 x Raptor SDA400/4-1AC1 x DDMP 12-09 1F 1800W M6A4 DA81 x Elta SCP400/4-3AC - IP551 x Soler & Palau - Contra Rotating TCBTx2-560 - IP651 x ACOAS/ AC/EC Auto Changeover 8Amp1 x DDMP 12-12 1F 1800W M6A4 DA81 x 125mm Round Connector with Damper1 x Elta SCP630/4-3AC - IP551 x Duct Termination with Mesh - 560mm1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT560/4-3AC1 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x Elta SCP560/4-3AC - IP551 x Transformer Speed Control - RTRE- 7.0Amp1 x Duct Termination with Mesh - 450mm1 x Elta SCP400/4-1AC - IP551 x Universal Pipe Fixing Clip1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/2B-3AC Three Phase1 x Impeller Side Guard - 450mm1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/4-3 Three Phase1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 150mm1 x Vent Axia ACM 100 inline mixed flow duct fan1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x RRB- transformer controller1 x MWS 5 – Transformer Controller With Motor Protection Unit5 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Speed Controller - REB81 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-1AC - Single Phase1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Silentub - STUB 1001 x DDMP 10-10 1F 1000W M6A2 DA51 x SPI-100 C Iris damper1 x Duct Termination with Mesh - 355mm1 x Multi Input Run On Timer - 0 - 20min - CFCU
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...