• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 929.38 (excl. VAT)

£ 1,115.26 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

4 x Transformer Speed Control - RTRE- 1.5Amp3 x Speed Controller - REB82 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x GRA-100 External Grill by S&P3 x Vent Axia Silent 100T (TIMER)1 x Speed Controller - REB51 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven5 x Helios HQW-250/4 - IP554 x PIR Sensor - PIR24 x MTP 10, 10K, Speed control1 x Elta Louvre Shutter - 400mm1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)2 x TUNE-R-200-3-M1 - Control Damper1 x Elta Wall Cowl SWC35/403 x Helios HQW-315/4 - IP552 x Transformer Speed Control - RTRE- 7.0Amp2 x Speed Controller - REB1-N2 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x TG-R room temperature sensor1 x Elta Wall Cowl SWC25/314 x Compact SCD450/4-1AC1 x Electronic extractor fan speed controller - FSC 1.51 x Remote Timer Control - 13511 x Elta Wall Cowl SWC45/501 x Elta Variable Speed Drive IP66 - 0.75KW3 x UB47- Universal Insulated Terminal1 x CBA-60 Inlet Flange for CBT-605 x QPTW 250C Acoustic Twin Fan with Controller1 x Transformer Speed Control - RTRE- 12.0Amp3 x MTS10- extractor fan 3 step switch3 x PIR Sensor - PIR43 x Elta 6 Amp Electronic single phase speed controller.5 x Speed Controller - REB11 x Isolator Switch - EFF-ISO1 x SG-200 Fan Guard for the HQW 2001 x REB-CVF 0-10v Controller2 x Quietflow SQS400-1ECL - Centrifugal Box Fan1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7102 x TG-K Duct temperature sensor1 x Jet Cowl - 315mm1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x DDMP 10-08 3F 2210W M6A4 DG01 x Elta - Room Sensor - Temp/Humid/C021 x RDH FLEX-SQUARE - ADH/RDH 04501 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Mini Diffuser - 100mm1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Speed Controller - REB103 x Duct Termination with Mesh - 450mm1 x Vent Axia ACM 200 inline mixed flow duct fan2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x ENV 100 12v transformer SELV1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x Skyflow SSR Horizontal Roof Cowl SSR31/35B4 x Silent 100 Window Kit - windowS1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5952 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan3 x Flat Roof Terminal -OFT 5 - Asphalt1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR2 x AXC TP - 100mm Plastic Centrifugal Inline Fan2 x Binks Bullows - Spray Booth Filter2 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Speed controller with Reverse - REB-1R1 x Elta Variable Speed Drive IP66 - 2.2KW2 x RD35S-4DW.6W.3L - 122297 (Three Phase)1 x Transformer 5 Speed Controller - ATC1-2TK1 x Duct Termination with Mesh - 400mm1 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x Multiflow SMB550/4-1AC1 x Single Deflection Grille 400mm with OBD damper1 x SAVE VSR 300 heat recovery unit1 x Speed Controller - REB63 x CBT-100N Centrifugal2 x AIRVENT speed control - AIR4019611 x TUNE-R-200-3-M4 - Control Damper1 x Helios RR-250-C Centrifugal inline fan3 x CBA-100 Inlet Flange for CBT-1002 x CBS-100 Outlet Flange for CBT-1001 x TecFire Intumescent Damper - Rectangular 400x400mm4 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Transformer Speed Control - RTRE- 3.0Amp1 x Transformer 5 Speed Controller - ATC1-4TK1 x Helios TSW 1.5 Amp Transformer speed controller1 x ERR 20/1 Centrifugal inline fan1 x Speed Controller - REB2.5-N1 x VTR 300 STD Filter Kit1 x Duct Termination with Mesh - 355mm1 x 100mm Round Connector with Damper1 x ELM 18 EX Flexible Cuff for ERM 181 x Elta SPA500/4-1AC - IP541 x Contactor Interface Station - CI92 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Elta SCP400/4-1AC - IP551 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x CPTA-E Flush mounted PIR sensor with timer1 x Elta 10 Amp Electronic single phase speed controller.1 x 7 Day Programmable TIMECLOCK1 x SPI-100 C Iris damper1 x DS-2 2-Speed Switch (3 Phase)1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x ELTA - Three Phase Transformer 3amps1 x CBM 9-9 550w 4P VR (Open Motor)1 x Silentub - STUB 1001 x Speed Controller - REB161 x FRQ5-10A Inverter Speed controller1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x RDS 1 Helios Transformer Controller With Motor Protection1 x Temperature Fan Speed Controller - ATCP4-WMS2 x DEF-140T Inlet Guard for the CBT-100N
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...