• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 929.38 (excl. VAT)

£ 1,115.26 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

2 x Helios TSW 1.5 Amp Transformer speed controller1 x Transformer Speed Control - RTRE- 7.0Amp2 x Speed Controller - REB101 x Transformer Speed Control - RTRE- 1.5Amp4 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Push Timer Switch - ZA42 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x MWS 3 – Transformer Controller With Motor Protection2 x Speed Controller - REB13 x Systemair Save Connect 2.0 Internet Module2 x CS2 Current Switch3 x COM-34 x MWS 1.5 – Transformer Controller With Motor Protection3 x Elta Variable Speed Drive IP66 - 0.75KW1 x Remote controller FLEX - for VEKO INT3 x Isolator Switch - ISOSW1 x Time Delay Unit - DT20B1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x DDMP 12-12 3F 1810W M6A4 DG01 x Speed Controller - REB81 x 7 Day Programmable TIMECLOCK1 x TTC-2000 Three phase electric heater controller1 x ACO8AC/EC AutoChangeover panel1 x ACOAS/ AC/EC Auto Changeover 8Amp2 x Single phase speed controller by auto-transformer - RMB 3.5 Amp2 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x MTS10- extractor fan 3 step switch4 x TG-K3/NTC10-01 - Duct temperature sensor2 x TG-K Duct temperature sensor2 x MTP 10, 10K, Speed control1 x Elta ACO Panel 149-ACO14E2 x Transformer (silent) speed controller - RE 1.5 Amp1 x EM30-24 Electro-Mechanical Control Panel1 x EC-Vent control board1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Elta 6 Amp Electronic single phase speed controller with TK1 x JETLINE-100 ECOWATT - In Line Centrifugal Duct Fan1 x ACO 149-ACO1/EDV1 x Transformer speed controller - ATC1 - 1.5 Amps1 x CBT-130N Centrifugal2 x Helios HQW-200/2 - IP551 x Potentiometer EGH 01 - for DDMP Fans2 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x EC6H - Reversible Group Fan Electronic Controller2 x BEAS-control module2 x Speed Controller - REB1-N1 x Elta - Room Sensor - Temp/Humid/C021 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -4pole1 x Vent Axia Silent 100T (TIMER)1 x EC-Vent Room Unit1 x Envirovent G4 Filter - SL-G4/F71 x Elta Variable Speed Drive IP66 - 2.2KW2 x Contactor Interface Station - CI91 x Mounting Feet (Pair) for SLC-450-060B-04501 x EM30-24 Control Panel Commissioning Service1 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x Transformer 5 Speed Controller - ATC1-12TK1 x TG-R room temperature sensor1 x GXC6EC - High Performance Extract Fan1 x Electronic extractor fan speed controller - FSC 1.51 x TG-K Duct temperature sensor1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x AIRVENT speed control - AIR4019611 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6302 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x CBT-100N Centrifugal1 x Speed controller with Reverse - REB-1R1 x Elta ACO Panel 149-ACO18B2 x Silent 100 Window Kit - windowS2 x Transformer 5 Speed Controller - ATC1-4TK1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x EBM-Papst D4E225-BC01-17 Double inlet1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x Transformer 5 Speed Controller - ATC1-2TK1 x Skyflow SSR Horizontal Roof Cowl SSR31/35B
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...