• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 929.38 (excl. VAT)

£ 1,115.26 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

1 x Speed Controller - REB161 x Electrostatic Precipitator - 1H x 3W2 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x RD35S-4DW.6W.3L - 122297 (Three Phase)1 x Step switch S-5EC, 0-10V1 x Elta Variable Speed Drive IP66 - 5.5KW1 x GENIOX 11 Internal Mounted Unit1 x 204x60mm Insulated Rectangular Horizontal 90° Bend2 x CBA-100 Inlet Flange for CBT-1001 x Helios RR-250-C Centrifugal inline fan1 x BDS 800 RA b/d shutter1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x AIRVENT speed control - AIR4019614 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR2 x AXC TP - 100mm Plastic Centrifugal Inline Fan3 x ACOAS/ AC/EC Auto Changeover 8Amp2 x ACO8AC/EC AutoChangeover panel1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x TUNE-R-315-3-M4 - Control Damper3 x SPI-100 C Iris damper1 x CSB-60 Centrifugal fan1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Duct Termination with Mesh - 710mm3 x ELTA - Three Phase Transformer 3amps1 x RSK355 - Back Draught Shutter2 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Elta 2 Amp Electronic single phase speed controller.1 x DVV 560D4-XM/F4002 x CBS-100 Outlet Flange for CBT-1001 x GENIOX 11 Roof Mounted External Unit1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x Elta SCP400/4-1AC - IP551 x TUNE-R-160-3-M0 - Control Damper (NO ACTUATOR)1 x Helios ESA-1 Surface mounted Speed Control 1amp2 x Universal Pipe Fixing Clip1 x 125mm Round Connector with Damper1 x Helios HQW-355/4 - IP551 x Vent Axia ACM 100 inline mixed flow duct fan1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x Speed Controller - REB102 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Helios PA10 Speed Potentiometer2 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Duct Termination with Mesh - 315mm1 x 100mm Round Connector with Damper2 x MTP 10, 10K, Speed control1 x Elta SCP350/4-1AC - IP551 x CBT-130N Centrifugal2 x Two Speed Switch - REGUL-21 x Duct Termination with Mesh - 355mm1 x VA 9/2 T - High Temp Axial Fan,2 x Silent 300 CZ Design PLUS Extractor Fan1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x ADH E0-280 Flange - 0280 ADHE/RDHE2 x DDMP 10-10 1F 1000W M6A2 DA51 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/2B-3AC Three Phase1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/4-3 Three Phase1 x PM230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x Flanged Damper 019-0500-STD1 x Transformer speed controller - ATC1 - 1.5 Amps1 x REB Ecowatt Speed Control - REB-ECO1 x RDH Flange - 03151 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Silentub - STUB 200
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 58.40

I have a loft mount extractor fan which was very noisy. I ...