• Model:CAB-400RE

Acoustic Box Fans (Inline) - CAB-400 RE

£ 890.40 (excl. VAT)

£ 1,068.48 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3082 m3/h
Max Power: 870 Watts
Max Current: 4.09 Amps
Sound pressure Level (dB(A))@3m: 41db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-400 RE Data Sheet

1 x 125mm Insulated Round T-Piece1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 150mm1 x Spiral Duct Grille Termination - 150mm1 x Flanged Spigot - 80mm1 x 220x90mm Insulated Rectangular T-Piece1 x 100mm Round Wall Plate1 x 204x60mm to 125mm Insulated Straight Adapter1 x HRT/6-800/28-BZN-68C1 x Duct Mounted Filter Box - G4 Grade Panel - 100mm1 x 125mm Insulated 45 Degree Bend1 x Soler & Palau - HCBT/4-800/L-AX - IP551 x Male Ducting Connector - 150mm1 x Ancillary Sealing Band - 150mm1 x 1mtr Insulated Round Ducting - 125mm1 x HXP450/4-3 - 4 Pole - Three Phase1 x Eco Hand Drier1 x Synthetic Air Filter Media - 10mm x 1000mm x 1000mm1 x Ducting 90 Degree Bend - 355mm1 x CS2 Current Switch1 x Duct Fast Clamps - 355mm1 x Elta SPA450/46-3AC - IP541 x EBB-250 S DESIGN Centrifugal Extractor Fan1 x Ancillary Pack for SLC-4001 x HPA Heavy Duty Flexible Ducting1 x Ancillary Pack for SB-Biflow 400 model1 x Access Door 400mm x 400mm1 x Spiral Ducting 3 Meters - 450mm1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x AES-Fire control unit1 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x Contactor Interface Station - CI91 x EDM 100 CHZ1 x Duct Humidistat - HS3_hdt1 x Ancillary Pack for SDA350/4-1EC1 x Ancillary Pack for SB-CYL 400 model1 x Blast Gate (Manual) 300mm1 x Ducting T Piece Equal - 80mm1 x Differential Pressure Switch - 50 - 500 Pa - IP651 x Spiral Duct Grille Termination - 80mm1 x Hydor HPA450/6-1A1 x Quietflow SQS400-1ECL - Centrifugal Box Fan1 x Jetflow-HIT Metal inline - 125mm1 x Ducting 45 Degree Bend - 80mm1 x Flexible PVC Ducting - 220x901 x Elta SCP450/4-3AC - IP551 x Ancillary Pack for SB-CYL 500 model1 x Pressed Ducting Saddle - 450mm
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...