• Model:CAB-400RE

Acoustic Box Fans (Inline) - CAB-400 RE

£ 890.40 (excl. VAT)

£ 1,068.48 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3082 m3/h
Max Power: 870 Watts
Max Current: 4.09 Amps
Sound pressure Level (dB(A))@3m: 41db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-400 RE Data Sheet

1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Elta Cased Axial Flange - 315mm1 x Gorilla HVLSX301 x Belt Drive Cased Axial Fan - 800mm - L version1 x AXC 355-6/19°-2(B)-P (0.75 kW) - Smoke Extract Fan1 x CTI CVA-N 450 Outdoor cover for CVAB/T Fans1 x Blast Gate (Manual) 125mm1 x Access Door for Circular Duct - 280 x 80 - SIZE 101 x Acopel F400-800/1801 x Duct Mounted Filter Box - 450mm - M6 grade Bag filter1 x Elta Unpodded Silencer Melinex 1D-450mm1 x Duct Mounted Filter Box - MINICELL F7 Grade Panel Filter 300mm Spigot1 x KD 250 L1 Circular duct fan1 x Flexible PVC Ducting - 220x901 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Elta Short Cased ATEX Axial fan - SCX050L2-A9/161 x GB-WSD 400 Weather Protection hood for the Giga-Box Fans - 400mm1 x Ducting Y Piece - 315mm1 x TCBT/4-710/H EXDIIBT4 ATEX1 x *VORT HRW 40 MONO Evo HCS WIFI - Single Room Heat Recovery Unit,1 x Elta SCP350/4-1AC - IP551 x Soler & Palau - HCBT/4-710/H - IP651 x Circ.connection-125 fo EX-140 ATEX unit1 x 125mm Round Condensation Trap1 x RVK-EX 315D4 (ATEX) - 315mm Atex Rated Centrifugal Fan1 x AW Sileo EC Plate Axial Fan - Three Phase - 800mm1 x Female Ducting Connector - 250mm1 x CADB/T-HE PRO-REG Series1 x AW Sileo EC Plate Axial Fan - Three Phase - 710mm1 x Ducting T Piece Equal - 500mm1 x FlameProof Plate Axial Fan - Three Phase - 10.5 inches - Eexd IIC T4 - 4 pole1 x Raptor SDA630/6-1AC1 x CRHB-250N Ecowatt - Energy Efficient Roof Fan1 x FAST-TRACK RANGE 90mm - Semi-Rigid Duct 50M1 x HRT/4-350-BPN E211 x Soler & Palau - HCBT/4-900/H - IP551 x Insulated extract Plenum 8+11 x DOL Starter with Isolator - Three phase1 x Spiral Duct Grille Termination - 80mm1 x Elta SPA350/4-1AC - IP441 x FSAF1250C1DA Silencer 1320/201 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x Airvent ceiling fan controller1 x Soler & Palau TCBT/4-630/H - IP651 x 125mm Insulated 90 Degree Bend1 x BD7/7 centrifugal M4 0.13Kw - Galvanised Impeller - MBI Assembled1 x Remote Timer Control - 13511 x MV-Silent 350 Bathroom Extractor Fan Kit - Timer1 x Soler & Palau - Contra Rotating TCBTx2-560 - IP651 x Duct Termination with Mesh - 800mm1 x FSAF1000B1DB Silencer 1043/241 x Spiral Ducting 1 meter - 200mm1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x 110 x 54mm Flat Channel Clip (Pack Of 5)1 x Acoustic Box Fans (Inline) - CAB-400 RE1 x Soler & Palau - HCBT/4-800/H-B FLOW ( Supply Air Fan) - IP551 x 5-Speed Controller for use with Elta SAX Classic Fans1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 200mm1 x Elta Standard Ambient Flexible Connector - 1000mm1 x Duct Suspension Rings - 180mm1 x Multiflow SMB650/4-1AC1 x Three Phase ATEX Compact axial fan - 355mm - compactA3ATE1 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x Etamaster EM 400 EC 01 inline mix-vent fan1 x Male Ducting Connector - 900mm1 x EM30-24 Control Panel Commissioning Service1 x AW 550 D6-2-EX Explosion Proof Axial Fan - ATEX1 x ELM 25 EX Flexible Cuff for ERM 2501 x Elta Podded Silencer 1D- 710mm1 x FN091-SDK.6N.V7P21 x Duct Suspension Rings - 400mm1 x Raptor SDA560/46-3AC1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/2-3 Three Phase1 x Elta SPA630/6-1AC - IP541 x Ancillary Pack for SB-Biflow 500 model1 x Anti Vibration Mounts - Small - Pack of 4 - AVM21 x CTI CVA-N 250/315 Outdoor cover for CVAB/T Fans1 x ISOR 250 EC 201 x HCFB/4-630mm plastic impeller plate fan
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...