• Model:MPS-280-D2

Acoustic Commercial Kitchen Inline Exhaust Fan - MPS (Three Phase) - 315mm

£ 795.90 (excl. VAT)

£ 955.08 (inc. VAT)

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility.
315mm Spigot.
Flow Rate: 3350 m3/hr

Weather housings and also available making them suitable for outdoor mounting.

EC (energy efficient & with integrated speed control) versions also available, ask for details.
* Motor can be regulated using voltage reduction.
* Terminal connections for thermal contacts.
* IP 54 degree of protection for closed housing covers as well as duct connections fitted on the inlet and outlet sides.
* Models 225-D2 ~ 315-D2 supplied with 2-pole motors.
* Models 315-D4 ~ 560-D4 supplied with 4-pole motors.
* Max. medium temperature 120°C
* Motor outside of air stream
* Speed controllable
* Swing-out fan unit
* With condensate and grease drain

Mounting instructions
* Installation with upward, right-hand or left-hand exhaust socket.
* If the unit is mounted with the exhaust socket pointing to the left or the right, the service door must be altered by the customer.

Model 225-D2 has a 200mm spigot. Max Airflow 1960 m3/hr
Model 250-D2 has a 250mm spigot. Max Airflow 2730 m3/hr
Model 280-D2 has a 315mm spigot. Max Airflow 3350 m3/hr
Model 315-D2 has a 354mm spigot Max Airflow 4520 m3/hr
Model 315-D4 has a 354mm spigot Max Airflow 3580 m3/hr
Model 355-D4 has a 354mm spigot Max Airflow 4350 m3/hr
Model 450-D4 has a 354mm spigot. Max Airflow 6660 m3/hr
Model 500-D4 has a 400mm spigot. Max Airflow 7890 m3/hr
Model 560-D4 has a 500mm spigot. Max Airflow 11840 m3/hr
All above at free air.

Link to the manufacturers website with extra information HERE
1 x 204x60mm 90 Degree Vertical Bend1 x CBMT/Q 160-15 1 HEATER KIT1 x CC-710-2.2kw1 x MPC 450 E4 20 - High Temp Acoustic Box Fan1 x Helios VARW 450/4 - TK1 x 204x60mm Elbow Bend with 125mm Fixed Spigot1 x Quietflow SQSDCV100-1ECL - Centrifugal Box Fan1 x DA12/12 Feet1 x Soler & Palau TCBT/6-710/H - IP651 x Etaline 400mm1 x CBMT/Q 150-15 1 HEATER KIT1 x Elta SLC450/4-3AC - IP551 x Etaline 400mm D4-01 3-phase1 x Soler & Palau - TGT/6-1000-3/26 BLP 3kW (230/400V50Hz) IE3 V51 x HV Wall Mounted Belt Drive Fan 1500mm 220V to 240V / 50Hz 1.5kW - Single Phase1 x CBMT/Q 150-27 1 HEATER KIT1 x Quietflow SQS100-1ECL - Centrifugal Box Fan1 x HEATER BATTERY+CONTROLS 315 DIA 1 PHASE 4/8kW1 x Spiral Ducting 3 Meters - 180mm1 x VBK 65 - Water heating battery1 x Ducting 15 Degree Bend - 180mm1 x Stainless Duct Delivery Charge (Standard 1 x 3m)1 x Soler & Palau HXM-250mm1 x Classic SAX30/12AR Window/Wall Mounted1 x Hydor HPA250/4-11 x 150mm - 200mm Round Reducer1 x Access Door 450mm x 450mm1 x Blast Gate (Manual) 180mm1 x 150mm Wall Duct - 350mm1 x Gorilla HVLSX601 x TD500 Mixvent - 160mm - TD500(5211302400)1 x Gorilla HVLSX301 x Hydor HPA560/6-1A1 x Access Door for Circular Duct - 400 x 300 - SIZE 501 x Impeller Side Guard - 630mm1 x EC-Basic-T temperature1 x Direct AM Delivery Surcharge1 x 2mtr Round Ducting - 150mm1 x Jetflow-HIT Metal inline - 160mm1 x Singleflow SSDL315-1EC1 x BEAS-control module1 x DEF-1000-AN1 x KRJ - 160 Inlet Guard for CBB/CBT fans1 x TD-SILENT 2000/3151 x Soler & Palau - HXTR/4-250/H - IP441 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 515watt VR RE1 x Elta SCP250/4-3AC - IP551 x JETLINE-160 - In Line Centrifugal Duct Fan1 x K 200 L Sileo1 x Gorilla HVLSX501 x QP315C Acoustic Fan - 315mm1 x Metal Inline Fan - VENT-160NK1 x Classic SAX23/9A Window/Wall Mounted1 x Impeller Side Guard - 450mm1 x Pre 10:30 Delivery Surcharge1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Gorilla HVLSX401 x Access Door for Circular Duct - 250 x 150 - SIZE 251 x CBM Low Pressure Centrifugal Fan - CBM 9/9 6 Pole 300watt VR RE1 x Helios HQW-560/6 - IP551 x 150mm Round 90 Degree Bend1 x Commercial Thermostat - TH161 x CBM Low Pressure Centrifugal Fan - CBM 9/9 6 Pole 200watt VR RE
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 170.17

Excellent low noise fan, I've got one unit running years and...