• Model:CC-ATEX404

CC-ATEX 404 B M Short Cased Axial Fan

£ 813.75 (excl. VAT)

£ 976.50 (inc. VAT)

The ducted axial fans of CC series are used for ducted installations requiring large airflow with relatively low pressure drop, like ventilation and cooling systems in industrial, naval, commercial, civil, energetic fields.

The series consists of different sizes with impeller diameter from 310 to 1600 mm. CC fans can be fitted with motors of different polarity, depending on size and required performance. Suitable for conveying clean air with temperature from -10 °C to +50°C in continuous service. The explosion-proof version CC-ATX is certified by a Notified Body according to the 94/9/CE Atex Directive and is suitable to convey clean air in the temperature range -10°C +40°C. This version is suitable for installation in zone 1/21, that are areas where it is necessary to guarantee high security against explosions and fires due to presence of flammable gas(II2G) and/or dusts (II2D/II2GD).

Construction
• Short casing in steel sheet, with fixing flanges manufactured according to UNI ISO 6580-EUROVENT standard. Protected against atmospheric agents by epoxy paint.
• Axial impeller with aerofoil profile blades in glass reinforce polyamide and die-cast aluminium hub, balanced according ISO 1940. Variable pitch angle in still position with setting means.
• Execution 4 (with impeller directly coupled to motor with feet) and airflow from motor to impeller.
• Motorizations:
- CC: asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F.
- CC-ATX: asynchronous three-phase motors or single-phase II2G,II2D,II2GD according to international standards IEC 60034, IEC 60072, IEC 60079 and/or IEC61241, EMC 2004/108/ CE, LVD 2006/95/CE, with Atex certification, CE marked, IP55/IP 65, class F.
- All motors suitable to S1 service (continuous working at constant load).

Accessories

• Extension (for long casing version) with inspection porthole (CCpro)
• Flat protection guard (CCr)
• Conic protection guard (CCrc)
• Flexible connectors (CCga)
• Support feet (CCst)
• Inlet/outlet bell mouth (CCbo)
• Silencers, with and without pod, in three lengths (CCsa and CCsb)
• Counter flange (Ccf)
• Counter flange with collar (CCfc)
• Anti-vibration mounts.
PDF Files


Data Sheet

Customers also purchased...

1 x Access Door for Circular Duct - 300 x 200 - SIZE 501 x Air Trak Heater-100mm1 x CBMT/Q 315-54 1 HEATER KIT2 x DA12/12 Feet1 x Access Door for Circular Duct - 300 x 200 - SIZE 351 x Purlin Box 500/560 for RAW Cowls2 x HA-900 N Cooker Hood1 x Elta Wall Cowl SWC25/311 x Helios DDF-315 Roof Cowl1 x Soler & Palau - HXBR/4-400/H - IP542 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x KBA- inlet mounting flange for CRMT 2251 x Helios DDF-400 Roof Cowl2 x Jetflow-HIT Metal inline - 150mm1 x Soler & Palau - HXBR/4-560/H - IP541 x CBM 12/9 CM/AL 1100W 6PT - Closed Motor1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/6-15000/710 ND - Pack 101 x GB-WSD 450 Weather Protection hood for the Giga-Box Fans - 450mm1 x BDS 630/710 RA b/d shutter1 x B-flow Impeller HCBB/T-355mm1 x Stainless Steel IL Flanged Spigot-400mm1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase2 x DDMP 10-10 FLANGE1 x Elta SLC450/4-3AC - IP551 x Elta SCP560/4-3AC - IP551 x ERR 12/1 Centrifugal inline fan1 x Duct Mounted Filter Box - G4 Grade Panel - 355mm1 x Double Inlet Forward Curved Centrifugal Fans - FDA-225-C1 x GXC9 - High Performance Extract Fan1 x Frequency converter RUCK - FU 075 212 x Metal Inline Fan - VENT-125NK1 x HCFB/4-450mm plastic impeller plate fan1 x Silentub - STUB 2002 x AW Sileo EC Plate Axial Fan - Three Phase - 560mm1 x Elta SLC1000/6B-3AC - IP551 x MEV 160 & 300 Additional Spigots1 x Carriage1 x Acoustic Commercial Kitchen Inline Exhaust Fan - MPS (Three Phase) - 400mm1 x CBS-100 Outlet Flange for CBT-1001 x Duct Mounted Filter Box With Paper G2 AND Metal Washable Filter - 250mm1 x Manual Overide Switch - MOS1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x EM 150L-E2M 01- Etamaster-1501 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-12000/560 ND - Pack 81 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x Access Door 450mm x 450mm1 x Miniflow SMF Horizontal Roof Cowl SMF131 x Elta Standard Ambient Flexible Connector - 1000mm1 x JETLINE-160 - In Line Centrifugal Duct Fan1 x CBM 10/10 - 373watt - 6 Pole1 x PIR Sensor - PIR41 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x Helios HQW-630/4 - IP551 x 100mm Round Wall Plate1 x SEL355/2-1AC1 x Etaline 150mm - EL 150L E2 011 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-HWAS1 x JBR N - 630 Flange to suit CRHB/CTHB roof fans1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)2 x Soler & Palau - HXBR-200 ECOWATT - IP441 x SG AW-710 BGr , RAL 90051 x Duct Mounted Filter Box - G4 Grade Panel - 250mm1 x External weather louvre Rectangular in RAL 9010 - 1200w x 800h - WL501 x Duct Humidistat - HS3_hdt1 x Mounting Feet (Pair) for SLC-450-060B-04501 x CRHT/4-355 N Roof mounted Fan - Horizontal discharge1 x Helios TSW 5 Amp Transformer speed controller1 x Inline Hepa filter with housing & pre-filters1 x 100mm Round Connector1 x Synthetic Air Filter Media - 10mm x 2mtr x 5mtr Roll1 x Access Door for Circular Duct - 400 x 300 - SIZE 452 x Helios HQW-200/2 - IP551 x Elta Unpodded Silencer 1D-560mm1 x HRB/4-450-30-APN1 x Soler & Palau - HCBT/4-560/H - IP651 x Duct Mounted Filter Box - G4 Grade Panel - 125mm1 x CBT-125 Centrifugal1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt VR RE1 x DA 10/8 4-Pole 550watt 3-Speed1 x TXBR/4-500-C1 x Dynair AL 225/4 Forward curved blade centrifugal fan.1 x COM-31 x Soler & Palau - HCBT/4-1000/L - IP551 x FSD-TD 350 x 350 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Soler & Palau - HCBT/6-400/H - IP651 x 204x60mm 45 Degree Horizontal Bend1 x TUNE-R-125-3-M4 - Control Damper1 x HCFT/4-315mm (B-FLOW) plastic impeller plate fan1 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x 220x90mm Rectangular to 150mm Round Adaptor1 x 110 x 54mm Equal Horizontal T-Piece1 x KRJ - 250 Inlet Guard1 x Elta SPA630/46-3AC - IP541 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 420mm1 x Mounting Feet (pair) for SB-CON 4001 x CBS-60 Outlet Flange for CSB/CBT-601 x Commercial Thermostat - TH161 x BDS 500/560 RA b/d shutter1 x Jetflow-HIT Metal inline - 100mm1 x Dynair QCL 200mm (2-Pole)1 x Mounting Feet (pair) for SB-CON 2501 x Elta SLC315/4-3AC - IP551 x KBA- inlet mounting flange for CRMT 2501 x KV DUO 500 EC (3Ph-400v) with changeover1 x ZAC- 560 -4-11 x Etaline 710mm - D4 02 3 Phase1 x Air Quality Sensor - AQS1 x CMRT/2-251 0.37Kw Centrifugal single inlet fan1 x Manrose T12 TIMER Transformer- T12T1 x Soler & Palau TCBT/4-250/H - IP441 x Purlin Box 400/450 for RAW Cowls1 x Flat Roof Terminal -OFT 5 - Bitumen1 x CS2 Current Switch1 x KRJ - 225 Inlet Guard1 x 1mtr Round Ducting - 125mm1 x JETLINE-100 - In Line Centrifugal Duct Fan1 x Soler & Palau - HCBT/4-355/H - IP651 x Painting Charge For Extlvr1 x SG AW 710 Guard grille (GFC)1 x RSK400 - Back Draught Shutter1 x CBMT/Q 200-54 1 HEATER KIT1 x Multiflow SMB450/4-1AC1 x SPI-100 C Iris damper1 x PRIO-160 160mm Inline Mixvent Fan1 x Elta SPA450/46-3AC - IP541 x Helios GigaBox 450mm GBD 450 centrifugal - EC Motor1 x Venturia Whole House Ventilation1 x Soler & Palau - HXTR/4-315/H - IP541 x Ductwrap Insulation DW501 x G2 duct Mounted Panel Filter - 245 x 245 x 47mm1 x Elta SPA710/6-3EC1 x Elta Wall Cowl SWC35/401 x Elta Standard Ambient Flexible Connector - 500mm1 x Metal Inline Fan - VENT-315NK1 x Soler & Palau TCBT/6-450/H - IP651 x Differential Pressure Switch - 100 - 1000 Pa - IP651 x Soler & Palau HXM-250mm1 x SS Series Slimseal 800mmx800mm Damper1 x HCFT/4-400mm plastic impeller plate fan1 x Ancillary Pack for SLC-5001 x Jetflow-HIT Metal inline - 315mm1 x CBM 10/10 4 Pole 550watt RE VR (3 Phase)1 x DEF-900AN1 x Mounting Feet (Pair) for SLC-800-060B-08001 x FLEX CONNECTOR FOR MFQ-560 FAN1 x Soler & Palau HXM-200mm1 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x EC-Basic-T temperature1 x 204x60mm 90 Degree Vertical Bend1 x Elta Turboflow-TF - 560mm - Single phase1 x Belt Drive Cased Axial Fan - 900mm - H version
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 119.00

I've had 2 of these fans for 4 years now, and they are great...