• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 937.13 (excl. VAT)

£ 1,124.56 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

3 x Envirovent 4 Way Remote Control Switch - SWHBKRF-41 x TTC-2000 Three phase electric heater controller2 x Vent Axia ACM 100 inline mixed flow duct fan2 x ACO8AC/EC AutoChangeover panel1 x CONTROL ECOWATT - Basic1 x EM30-24 Electro-Mechanical Control Panel1 x Elta ACO Panel 149-ACO18B1 x EC-Vent Room Unit3 x Systemair Save Connect 2.0 Internet Module1 x EM30-24 Control Panel Commissioning Service3 x Vent Axia ACM 125 inline mixed flow duct fan2 x TG-K Duct temperature sensor2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x Envirovent G4 Filter - SL-G4/F73 x Transformer (silent) speed controller - RE 3.0 Amp1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Elta ACO Panel 149-ACO14E1 x EC-Vent control board1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5002 x REB-CVF 0-10v Controller1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x Easy-fix termination kit - High Rise Ventilator - EFT2 x Speed Controller - REB14 x PIR Sensor - PIR21 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3553 x QPTW 250C Acoustic Twin Fan with Controller1 x Elta Wall Cowl SWC56/634 x UB47- Universal Insulated Terminal1 x GRA-100 External Grill by S&P1 x Elta Wall Cowl SWC35/402 x Multi Input Run On Timer - 0 - 20min - CFCU1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost4 x Transformer 5 Speed Controller - ATC1-4TK3 x Transformer speed controller - ATC1 - 1.5 Amps1 x Vent Axia Silent 100T (TIMER)2 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT1 x Elta Louvre Shutter - 400mm1 x SAVE VSR 300 heat recovery unit1 x Elta Wall Cowl SWC45/502 x Vent Axia ACM 150 inline mixed flow duct fan2 x Vent Axia ACM 200 inline mixed flow duct fan2 x Elta 6 Amp Electronic single phase speed controller with TK3 x Elta 3 Amp Electronic single phase speed controller with TK2 x Speed Controller - REB52 x MV-B Dual Switch for use with Helios HQW plate fans,2 x Contactor Interface Station - CI91 x AIRVENT speed control - AIR4019612 x PIR Sensor - PIR43 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan3 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan2 x Speed controller with Reverse - REB-1R2 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE2 x CS2 Current Switch2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp2 x Remote Timer Control - 13511 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT3 x Airvent ceiling fan controller2 x Silent 100 Window Kit - windowS1 x Multiflow SMB550/4-1AC2 x Transformer (silent) speed controller - RE 5.0 Amp2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x Speed Controller - REB2.5-N2 x DDMP 12-12 3F 1810W M6A4 DG01 x Elta Variable Speed Drive IP66 - 4.0KW1 x Mini Diffuser - 100mm5 x Transformer 5 Speed Controller - ATC1-2TK2 x Helios TSW 3 Amp Transformer speed controller1 x RDS 11 Helios Transformer Controller With Motor Protection3 x Helios TSW 1.5 Amp Transformer speed controller2 x DEF-140T Inlet Guard for the CBT-100N2 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven2 x Isolator Switch - ISOSW4 x Speed Controller - REB1-N4 x MTP 10, 10K, Speed control2 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan2 x Temperature Fan Speed Controller - ATCP4-WMS3 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x 7 Day Programmable TIMECLOCK2 x CBS-60 Outlet Flange for CSB/CBT-602 x TG-K3/NTC10-01 - Duct temperature sensor2 x Helios HQW-200/4 - IP551 x Transformer (silent) speed controller - RE 1.5 Amp2 x Speed Controller - REB101 x RDH FLEX-SQUARE - ADH/RDH 04503 x Electronic extractor fan speed controller - FSC 1.52 x MWS 1.5 – Transformer Controller With Motor Protection2 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x TUNE-R-200-3-M1 - Control Damper3 x Skyflow SSR Horizontal Roof Cowl SSR31/35B1 x TD Mixvent 800/200 EEXEIIT31 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS2 x Helios HQW-250/4 - IP552 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven2 x VTR 300 STD Filter Kit2 x Speed Controller - REB82 x ENV 100 12v transformer SELV1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)2 x CBT-100N Centrifugal1 x Elta - Room Sensor - Temp/Humid/C021 x GXC6EC - High Performance Extract Fan1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x TUNE-R-200-3-M4 - Control Damper1 x CBM 9-9 550w 4P VR (Open Motor)3 x Transformer Speed Control - RTRE- 1.5Amp1 x Remote controller FLEX - for VEKO INT1 x Helios TSW 7.5 Amp Transformer speed controller1 x Helios TSW 0.3Amp Compact Transformer speed controller1 x Transformer 5 Speed Controller - ATC1-8TK1 x Push Timer Switch - ZA42 x MWS 3 – Transformer Controller With Motor Protection2 x Single phase speed controller by auto-transformer - RMB 10.0 Amp2 x WS - Reversing Switch from Helios Fans1 x Transformer Speed Control - RTRE- 5.0Amp2 x Transformer Speed Control - RTRE- 7.0Amp1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Helios HQW-630/4 - IP551 x ELM 18 EX Flexible Cuff for ERM 182 x Helios HQW-315/4 - IP552 x Elta 6 Amp Electronic single phase speed controller.1 x Elta Variable Speed Drive IP66 - 1.5KW2 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Elta Variable Speed Drive IP66 - 0.75KW1 x Helios TSW MCB Amp Transformer speed controller1 x Helios PU10 Speed Potentiometer (Flush Mounted)2 x KKS 100 silencer-section - For use with the MUB 100 size Fans.1 x RDS 7 Helios Transformer Controller With Motor Protection2 x DEF-CBM-RE-7 - Protection Guard1 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x SG-200 Fan Guard for the HQW 2001 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x CMT/4-315/130-4KW - Single inlet centrifugal fan direct driven1 x Quietflow SQS100-1ECL - Centrifugal Box Fan1 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x Silentub - STUB 1001 x Elta Variable Speed Drive IP66 - 5.5KW1 x DDMP 10-08 3F 2210W M6A4 DG01 x VEKA INT 2000/15.0-L1 EKO1 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x Jet Cowl - 315mm1 x Two Speed Switch - REGUL-22 x MWS 5 – Transformer Controller With Motor Protection Unit2 x Vortice Quadro Micro 100 I - Standard Version1 x LFBR 315 G4 - Helios Inline Filter Box - 315mm1 x Polyurethane Foam Media - 10PPI - Filter Media Sheets - Size: 2000mm x 1000mm1 x MTS10- extractor fan 3 step switch1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x EBM-Papst D3G133-BF05-14 Double inlet1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Capacitor 2uf for use with the EBM A4E range1 x Speed Controller - REB62 x TEM 075 - 5 Speed Transformer Speed Control1 x CBP-18/18-RC Belt Driven Centrifugal Fans1 x EBM-Papst D4E225-BC01-17 Double inlet2 x DDMP 09-09 3F 2130W M6A4 DG0
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 58.40

I have a loft mount extractor fan which was very noisy. I ...