• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 937.13 (excl. VAT)

£ 1,124.56 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

1 x PCA Diffuser - PCA-3151 x Circular Ceiling Diffuser - TST 1251 x Circular Ceiling Diffuser - TST 1001 x Circular Ceiling Diffuser - TST 2001 x Round ceiling diffuser 400mm1 x Balance S Diffuser - NO RING - 125mm1 x JSR 200 Painted RAL50181 x Curved Blade Grille 600x600 (2way blow)1 x Balance S Diffuser - NO RING - 100mm1 x Versio Square Ceiling Diffusers - RS141 x Circular Ceiling Diffuser - TST 1602 x Round ceiling diffuser 200mm1 x Round ceiling diffuser 300mm1 x Round ceiling diffuser 350mm1 x PCA Diffuser - PCA-2503 x Remote Timer Control - 13513 x Push Timer Switch - ZA41 x Time Delay Unit - DT20B2 x 7 Day Programmable TIMECLOCK1 x TTC-2000 Three phase electric heater controller3 x ACOAS/ AC/EC Auto Changeover 8Amp1 x EM30-24 Electro-Mechanical Control Panel1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x EC-Vent Room Unit1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Elta ACO Panel 149-ACO18B5 x Systemair Save Connect 2.0 Internet Module1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x EM30-24 Control Panel Commissioning Service1 x Elta Wall Cowl SWC56/631 x GRA-100 External Grill by S&P1 x Elta Wall Cowl SWC45/501 x Elta Wall Cowl SWC25/311 x Elta Louvre Shutter - 400mm1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x Jet Cowl - 315mm1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Single Deflection Grille 400mm with OBD damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH2 x Mini Diffuser - 100mm1 x Run On Timer - 5s - 4hrs - RT5A4 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan3 x Multi Input Run On Timer - 0 - 20min - CFCU2 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan2 x Helios TSW 7.5 Amp Transformer speed controller2 x Transformer 5 Speed Controller - ATC1-4TK2 x Transformer 5 Speed Controller - ATC1-12TK2 x Round ceiling diffuser 250mm3 x Three Phase Transformer controllers - RMT 1.5 Amp2 x Vent Axia ACM 125 inline mixed flow duct fan2 x Helios ZNE Electronic Fan Overrun Timer2 x Isolator Switch - ISOSW3 x Elta 6 Amp Electronic single phase speed controller with TK3 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x TG-K Duct temperature sensor4 x ACO8AC/EC AutoChangeover panel1 x EC-Vent control board2 x BEAS-control module1 x CONTROL ECOWATT - Basic1 x Envirovent G4 Filter - SL-G4/F71 x ACO 149-ACO1/EDV3 x Transformer (silent) speed controller - RE 3.0 Amp1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6302 x Speed Controller - REB51 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3552 x Quietflow SQS400-1ECL - Centrifugal Box Fan3 x Helios HQW-400/4 - IP552 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)3 x MTP 10, 10K, Speed control1 x REB-CVF 0-10v Controller2 x REE-2 Electronic Speed Controller1 x Elta Wall Cowl SWC35/402 x VTR 300 STD Filter Kit1 x Contactor Interface Station - CI91 x Egg Crate Grille with Dust panel filter 1 inch- 595x5953 x Vent Axia ACM 100 inline mixed flow duct fan4 x CBS-60 Outlet Flange for CSB/CBT-602 x EBM-Papst D3G133-BF05-14 Double inlet1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR2 x VTR 500 STD Filter Kit2 x CO2 Room Sensor - CO2-R1 x CBT-100N Centrifugal2 x DDMP 12-12 3F 1810W M6A4 DG02 x CBA-100 Inlet Flange for CBT-1001 x CBS-100 Outlet Flange for CBT-1001 x 100mm Round Connector with Damper2 x Helios TSW 3 Amp Transformer speed controller1 x RDS 11 Helios Transformer Controller With Motor Protection4 x Speed Controller - REB1-N3 x Duct Termination with Mesh - 100mm3 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE2 x CS2 Current Switch4 x Single phase speed controller by auto-transformer - RMB 1.5 Amp3 x COM-31 x Elta ACO Panel 149-ACO14E3 x Electronic extractor fan speed controller - FSC 1.52 x WS - Reversing Switch from Helios Fans2 x Helios HQW-630/4 - IP554 x TG-K3/NTC10-01 - Duct temperature sensor2 x Transformer (silent) speed controller - RE 1.5 Amp1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted4 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Remote controller FLEX - for VEKO INT1 x Transformer 5 Speed Controller - ATC1-10TK1 x Transformer 5 Speed Controller - ATC1-8TK1 x Capacitor 2uf for use with the EBM A4E range2 x MWS 5 – Transformer Controller With Motor Protection Unit3 x DEF-140T Inlet Guard for the CBT-100N3 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Elta 3 Amp Electronic single phase speed controller with TK3 x Vent Axia T-Series Controller2 x Helios HQW-200/4 - IP552 x Skyflow SSR Horizontal Roof Cowl SSR31/35B2 x TG-R room temperature sensor2 x Transformer (silent) speed controller - RE 5.0 Amp3 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x Helios HQW-315/4 - IP552 x Isolator Switch - EFF-ISO2 x CBM 9-9 550w 4P VR (Open Motor)1 x Speed Controller - REB12 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR3 x MTS10- extractor fan 3 step switch1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR2 x RDH FLEX-SQUARE - ADH/RDH 04502 x QPTW 250C Acoustic Twin Fan with Controller2 x Silent 100 Window Kit - windowS2 x Helios HQW-250/4 - IP551 x Vent Axia Silent 100T (TIMER)1 x UB47- Universal Insulated Terminal1 x Temperature Fan Speed Controller - ATCP4-WMS2 x ERR 20/1 Centrifugal inline fan2 x Two Speed Switch - REGUL-21 x Speed Controller - REB32 x Transformer Speed Control - RTRE- 7.0Amp2 x Speed Controller - REB101 x DEF-CBM-RE-7 - Protection Guard1 x Speed Controller - REB82 x SAVE VSR 300 heat recovery unit3 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan3 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT2 x CBA-60 Inlet Flange for CBT-603 x KMBI 250 Connector rectangular/circular to install on the discharge of CMT2 x DDMP 09-09 3F 2130W M6A4 DG01 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven2 x FFR 355 Filter Cassette1 x Transformer Speed Control - RTRE- 1.5Amp3 x CMT/4-315/130-4KW - Single inlet centrifugal fan direct driven1 x KBA- Inlet Mounting 3552 x AIRVENT speed control - AIR4019612 x KBA- Inlet Mounting 2801 x Control switch - CR1501 x KBA- inlet mounting flange for CRMT 2251 x DDMP 10-08 3F 2210W M6A4 DG02 x Potentiometer EGH 01 - for DDMP Fans1 x VEKA INT 2000/15.0-L1 EKO1 x KAD-355-F400 Rectangle Flexible Connector1 x 204x60mm Insulated Rectangular Vertical 45° Bend3 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C2 x Helios RR-250-C Centrifugal inline fan1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x MWS-75 Transformer controller with TK -7.5A1 x Transformer speed controller - ATC1 - 1.5 Amps1 x MWS 3 – Transformer Controller With Motor Protection1 x RR EC 160 Centrifugal inline fan - Energy Efficient Motor1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x CBP-18/18-RC Belt Driven Centrifugal Fans1 x RD35S-4DW.6W.3L - 122297 (Three Phase)3 x CSB-60 Centrifugal fan1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR2 x CMT/4-250-100 1.1KW - Single inlet centrifugal fan direct driven ( LG-90)1 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm1 x CBT-80N Centrifugal1 x Helios TSW 1.5 Amp Transformer speed controller2 x Transformer Speed Control - RTRE- 5.0Amp1 x Elta Variable Speed Drive IP66 - 2.2KW1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x GENIOX 11 Roof Mounted External Unit1 x Lo-Carbon Silhouette 100T (Timer)1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x SD-MUB Vibration pad set1 x CFI In-line 150 - Carbon Filter1 x Vent Axia Trickle & Boost Switch1 x KBA- Inlet Mounting 2251 x Envirovent 4 Way Remote Control Switch - SWHBKRF-41 x Transformer 5 Speed Controller - ATC1-2TK2 x Vent Axia ACM 150 inline mixed flow duct fan2 x Vent Axia ACM 200 inline mixed flow duct fan3 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x Elta Variable Speed Drive IP66 - 0.75KW3 x PIR Sensor - PIR21 x ENV 100 12v transformer SELV1 x TG-K Duct temperature sensor1 x Speed controller with Reverse - REB-1R2 x MV-B Dual Switch for use with Helios HQW plate fans,1 x TEM 075 - 5 Speed Transformer Speed Control1 x EM10-24v Control Panel for FSD-C dampers1 x RRB- transformer controller1 x Vortice Quadro Micro 100 I - Standard Version1 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x Speed Controller - REB61 x SG-200 Fan Guard for the HQW 2001 x KKS 100 silencer-section - For use with the MUB 100 size Fans.1 x CPTA-E Flush mounted PIR sensor with timer1 x RDS 7 Helios Transformer Controller With Motor Protection2 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x TD Mixvent 800/200 EEXEIIT3
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...