• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 937.13 (excl. VAT)

£ 1,124.56 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

1 x Speed Controller - REB101 x Speed Controller - REB81 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR4 x VTR 300 STD Filter Kit1 x Elta Wall Cowl SWC35/402 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan3 x MTS10- extractor fan 3 step switch1 x Elta 6 Amp Electronic single phase speed controller.1 x Elta Wall Cowl SWC45/502 x Transformer Speed Control - RTRE- 1.5Amp1 x Contactor Interface Station - CI92 x Speed Controller - REB11 x Mini Diffuser - 100mm1 x DDMP 10-08 3F 2210W M6A4 DG02 x PIR Sensor - PIR42 x UB47- Universal Insulated Terminal1 x Quietflow SQS100-1ECL - Centrifugal Box Fan1 x Compact SCD450/4-1AC4 x AIRVENT speed control - AIR4019611 x CBA-60 Inlet Flange for CBT-602 x Vertical Cowl and Fan (Single Phase) - RAV400-4-11 x Jet Cowl - 315mm2 x ENV 100 12v transformer SELV3 x CBT-100N Centrifugal1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7102 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x GXC6EC - High Performance Extract Fan1 x AXC TP - 100mm Plastic Centrifugal Inline Fan2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR3 x SPI-100 C Iris damper2 x MWS 1.5 – Transformer Controller With Motor Protection2 x WSD 100 (1060x1060x70)2 x VEKA INT 2000/15.0-L1 EKO2 x SD-MUB Vibration pad set2 x Transformer Speed Control - RTRE- 5.0Amp1 x Elta Variable Speed Drive IP66 - 1.5KW2 x Duct Termination with Mesh - 450mm2 x RD35S-4DW.6W.3L - 122297 (Three Phase)2 x TecFire Intumescent Damper - Rectangular 400x400mm2 x SAVE VSR 300 heat recovery unit2 x Comefri - TLZ 450 R - High Performance Scroll Fan2 x HIMF - Mixed Flow Fan 125mm Inline Fan3 x Multi Input Run On Timer - 0 - 20min - CFCU4 x Silent 100 Window Kit - windowS3 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x CBM Low Pressure Centrifugal Fan - CBM 10/8 4 Pole 373watt CVR1 x WS - Reversing Switch from Helios Fans1 x Helios HQW-315/4 - IP551 x ACO8AC/EC AutoChangeover panel1 x CK-60F Kit3 x Helios RR-250-C Centrifugal inline fan2 x Duct Termination with Mesh - 100mm1 x Speed controller with Reverse - REB-1R1 x Vent Axia Silent 100T (TIMER)2 x EBM-Papst D3G133-BF05-14 Double inlet2 x Flat Roof Terminal -OFT 5 - Asphalt1 x CO2 Room Sensor - CO2-R1 x Elta Variable Speed Drive IP66 - 5.5KW1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR3 x CPTA-E Flush mounted PIR sensor with timer3 x RDS 1 Helios Transformer Controller With Motor Protection3 x ELTA - Three Phase Transformer 3amps2 x Elta HXP 800mm 6-Pole (Three Phase)2 x VKS 355-500 Automatic shutter2 x CSB-60 Centrifugal fan1 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan2 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Speed Controller - REB1-N2 x Elta Variable Speed Drive IP66 - 4.0KW3 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-1AC - Single Phase1 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan1 x TD160-NT Mixvent - 100mm - TD160 Timer2 x ACO3TO-ADS-VFC-7.1A4 x VTR 500 STD Filter Kit2 x RTRD - Three Phase Speed Controller - 2 Amp1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x Speed Controller - REB33 x Helios ESA-1 Surface mounted Speed Control 1amp2 x TG-K3/NTC10-01 - Duct temperature sensor1 x MTP 10, 10K, Speed control2 x Comefri - TLZ 560 R - High Performance Scroll Fan1 x Round ceiling diffuser 200mm5 x HXP450/6-1 - 6 Pole - Single Phase1 x Silentub - STUB 1002 x Systemair Save Connect 2.0 Internet Module1 x FRQ5-10A Inverter Speed controller1 x Duct Termination with Mesh - 400mm1 x Round ceiling diffuser 250mm3 x CBA-100 Inlet Flange for CBT-1004 x MWS 5 – Transformer Controller With Motor Protection Unit2 x Transformer 5 Speed Controller - ATC1-2TK2 x TEM 075 - 5 Speed Transformer Speed Control2 x Vortice Quadro Micro 100 I - Standard Version1 x Speed Controller - REB61 x CBS-100 Outlet Flange for CBT-1002 x EHB 160 1.0kw - Helios Electric Heater Battery with Control and Sensor.3 x DPD 12PM Delivery Surcharge1 x EMI 150L E2M - Acoustic Inline Mixvent Fan2 x Duct Termination with Mesh - 355mm2 x Electrostatic Precipitator - 1H x 3W1 x Speed Controller - REB2.5-N1 x Elta 2 Amp Electronic single phase speed controller.1 x FU 15 16 Frequency Inverter2 x DEF-140T Inlet Guard for the CBT-100N1 x KAD-225-F400 Rectangle Flexible Connector1 x RUCK MTP 20, 10K, Speed control1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Three Phase Transformer controllers - RMT 1.5 Amp2 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan2 x CFI In-line 150 - Carbon Filter2 x Helios HQW-355/4 - IP552 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x 220x90mm x 1m Insulated Rectangular Duct1 x CBS-130 Outlet Flange for CBT-1301 x Singleflow SSDL315-1EC3 x MWS-75 Transformer controller with TK -7.5A1 x Helios HQW-630/4 - IP551 x Airvent ceiling fan controller1 x Duct Termination with Mesh - 200mm1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Elta Variable Speed Drive IP66 - 7.5KW1 x REB-CVF 0-10v Controller1 x RSK355 - Back Draught Shutter2 x RDH Flange - 02502 x Backdraught Shutters 039-SFSV-63/713 x VA 9/2 T - High Temp Axial Fan,2 x Silent 300 CZ Design PLUS Extractor Fan1 x Speed Controller - REB161 x HIMF - Mixed Flow Fan 100mm Inline Fan2 x Comefri - TLZ 225 R - High Performance Scroll Fan2 x Transformer (silent) speed controller - RE 5.0 Amp1 x Electronic extractor fan speed controller - FSC 1.52 x 125mm Round Connector with Damper3 x 100mm Round Connector with Damper3 x Transformer 5 Speed Controller - ATC1-4TK1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x SDD-U Anti Vibration Pads1 x Round ceiling diffuser 400mm1 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x Elta SCP400/4-1AC - IP551 x DDMP 09/07 Mounting Flange2 x CBA-130 Inlet Flange for CBT-1301 x Duct Termination with Mesh - 150mm1 x TD Mixvent 1100/250 EEXEIIT32 x LFBR 160 G4 - Helios Inline Filter Box - 160mm2 x CBT-100N Centrifugal ATEX II 2G Exe II T32 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x FFR 355 Filter Cassette1 x Duct Termination with Mesh - 315mm1 x DDMP 12-12 3F 5700W M6M0 DG71 x SQUARE MIXED FLOW FAN - MFQ 560mm (Three Phase)2 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x DDMP 09-09 3F 2130W M6A4 DG02 x Skyflow SSR Horizontal Roof Cowl SSR31/35B1 x DDMP 09-09 1F 1000W M6A1 DA52 x CBT-130N Centrifugal ATEX II 2G Exd IIB T41 x Speed Controller - REB51 x KBA- inlet mounting flange for CRMT 2501 x RDH Flange - 03151 x Rectangular Airbrick Adaptor1 x DDMP 09/09 Mounting Flange2 x CBP-18/18-RC Belt Driven Centrifugal Fans1 x DEF-CBM-RE-7 - Protection Guard1 x CBT-80N Centrifugal2 x DDMP 07/07 Mounting Flange1 x Helios TSW MCB Amp Transformer speed controller1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x CBM 12-12 1100w 6P Three Phase1 x 204x60mm x 1m Insulated Rectangular Duct1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Transformer (silent) speed controller - RE 1.5 Amp1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 1100watt 6PT (Closed Motor)1 x CBM 7/7 147w 4P RE-VR1 x Chaysol Da 12/12 CMAL - 1100W 6 Pole - Closed Motor - Three Phase1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x Lo-Carbon Silhouette 100T (Timer)1 x ELTA - Single Phase Transformer 16amps1 x CBB-60N Centrifugal1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x KKS 100 silencer-section - For use with the MUB 100 size Fans.1 x Transformer Speed Control - RTRE- 7.0Amp1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x Stainless steel Mesh Grease Filter - 600x600x50 NON STD1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x DA9/9-NT1 x Duct Termination with Mesh - 250mm1 x CBT-130N Centrifugal1 x Flat Roof Terminal -OFT 5 - EPDM1 x Helios VARW 450/4 - TK1 x CBP-9/9 LOW PRESSURE CENTRIFUGAL FAN1 x Elta SCP315/4-1AC - IP552 x Side Withdrawal Casing - 1H x 1W - To suit 100 Panel and 292 HEPA1 x Potentiometer EGH 01 - for DDMP Fans1 x ILHT/4-560 MV - High Temp Rectangle Duct Fan1 x Acoustic Box Fans (Inline) - CAB-355 RE1 x CFI Lite 600 Carbon Filter1 x Ancillary Pack for SLC-900 for SLC900/4A-3AC and SLC900/8-3AC2 x JMS-5601 x RDH Flange - 04001 x RTRD - Three Phase Speed Controller - 14 Amp1 x CS2 Current Switch1 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Transformer 5 Speed Controller - ATC1-8TK1 x PM230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x Commercial Single or 3 phase Fan Reversing Switch - RS1
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...