• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 937.13 (excl. VAT)

£ 1,124.56 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

1 x Transformer 5 Speed Controller - ATC1-10TK1 x ACOAS/ AC/EC Auto Changeover 8Amp3 x ACO8AC/EC AutoChangeover panel1 x TTC-2000 Three phase electric heater controller1 x Elta ACO Panel 149-ACO14E1 x EC-Vent control board1 x EM30-24 Electro-Mechanical Control Panel1 x CONTROL ECOWATT - Basic1 x ACO 149-ACO1/EDV1 x Elta ACO Panel 149-ACO18B4 x Speed Controller - REB54 x Systemair Save Connect 2.0 Internet Module1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x EM30-24 Control Panel Commissioning Service1 x EC-Vent Room Unit3 x Transformer (silent) speed controller - RE 1.5 Amp1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Single Deflection Grille 400mm with OBD damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH3 x Mini Diffuser - 100mm1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x Potentiometer EGH 01 - for DDMP Fans1 x STF1 Oscillating Tower Fan1 x Elta SLC560/4C-3AC - IP551 x DDMP 10-10 FLANGE1 x Chaysol Da 12/12 CMAL - 736 Watt - 6 Pole1 x Helios AV125 External Wall Fan1 x EBM-Papst D2E097-BK76-98 Double inlet2 x Transformer 5 Speed Controller - ATC1-4TK1 x Transformer 5 Speed Controller - ATC1-8TK2 x Helios TSW 0.3Amp Compact Transformer speed controller2 x Helios TSW 10 Amp Transformer speed controller2 x RDS 11 Helios Transformer Controller With Motor Protection2 x Helios TSW MCB Amp Transformer speed controller3 x Vent Axia ACM 125 inline mixed flow duct fan4 x CS2 Current Switch2 x TG-K Duct temperature sensor2 x DEF-140T Inlet Guard for the CBT-100N2 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x RTRD - Three Phase Speed Controller - 2 Amp1 x MWS 5 – Transformer Controller With Motor Protection Unit2 x Vent Axia ACM 100 inline mixed flow duct fan2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Helios TSW 7.5 Amp Transformer speed controller1 x RDS 7 Helios Transformer Controller With Motor Protection1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x MV-B Dual Switch for use with Helios HQW plate fans,3 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan3 x Vent Axia ACM 150 inline mixed flow duct fan1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x Single phase speed controller by auto-transformer - RMB 10.0 Amp2 x Helios HQW-200/2 - IP551 x Elta 6 Amp Electronic single phase speed controller with TK2 x Elta 3 Amp Electronic single phase speed controller with TK1 x Two Speed Switch - REGUL-22 x Helios HQW-630/4 - IP553 x TG-K3/NTC10-01 - Duct temperature sensor2 x CBS-60 Outlet Flange for CSB/CBT-601 x Airvent ceiling fan controller1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged2 x WS - Reversing Switch from Helios Fans2 x Helios HQW-200/4 - IP551 x REE-1 Electronic Speed Controller1 x ERR 20/1 Centrifugal inline fan3 x Multiflow SMB550/4-1AC2 x Speed Controller - REB33 x Transformer (silent) speed controller - RE 3.0 Amp1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Push Timer Switch - ZA41 x Isolator Switch - ISOSW1 x Remote Timer Control - 13511 x ERR 31/1 Centrifugal inline fan2 x Elta Variable Speed Drive IP66 - 0.75KW2 x SG-200 Fan Guard for the HQW 2001 x Commercial Single or 3 phase Fan Reversing Switch - RS13 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT3 x REB-CVF 0-10v Controller1 x Electronic extractor fan speed controller - FSC 1.51 x Elta Variable Speed Drive IP66 - 2.2KW3 x Silent 100 Window Kit - windowS3 x Speed Controller - REB102 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x Elta Variable Speed Drive IP66 - 7.5KW1 x KKS 100 silencer-section - For use with the MUB 100 size Fans.2 x PIR Sensor - PIR22 x DDMP 09-09 3F 2130W M6A4 DG03 x MTP 10, 10K, Speed control1 x Helios TSW 1.5 Amp Transformer speed controller1 x MWS 1.5 – Transformer Controller With Motor Protection3 x Speed Controller - REB1-N1 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x Helios HQW-250/4 - IP551 x Transformer 5 Speed Controller - ATC1-2TK2 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)2 x DDMP 12-12 3F 1810W M6A4 DG02 x PIR Sensor - PIR41 x 220x90mm Insulated Rectangular Horizontal 90° Bend2 x Envirovent 4 Way Remote Control Switch - SWHBKRF-44 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x Envirovent G4 Filter - SL-G4/F72 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x Elta 10 Amp Electronic single phase speed controller.2 x TD Mixvent 800/200 EEXEIIT32 x Skyflow SSR Horizontal Roof Cowl SSR80B3 x Transformer Speed Control - RTRE- 7.0Amp2 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x Elta Variable Speed Drive IP66 - 4.0KW4 x UB47- Universal Insulated Terminal2 x Skyflow SSR Horizontal Roof Cowl SSR31/35B2 x Helios HQW-315/4 - IP553 x QPTW 250C Acoustic Twin Fan with Controller1 x 220x90mm Insulated Rectangular Vertical 90° Bend4 x Speed Controller - REB11 x RR EC 160 Centrifugal inline fan - Energy Efficient Motor1 x ELM 18 EX Flexible Cuff for ERM 182 x MTS10- extractor fan 3 step switch2 x DDMP 09/09 Mounting Flange1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Speed Controller - REB63 x Speed Controller - REB83 x CBM 9-9 550w 4P VR (Open Motor)2 x KBA- Inlet Mounting 3552 x Elta 6 Amp Electronic single phase speed controller.4 x Transformer Speed Control - RTRE- 1.5Amp1 x Transformer Speed Control - RTRE- 5.0Amp1 x 204x60mm Insulated Rectangular Horizontal 90° Bend2 x Helios TSW 3 Amp Transformer speed controller2 x 7 Day Programmable TIMECLOCK2 x Duct Termination with Mesh - 355mm3 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR2 x MWS 3 – Transformer Controller With Motor Protection3 x DDMP 10-08 3F 2210W M6A4 DG02 x Elta - Room Sensor - Temp/Humid/C022 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x Compact SCD450/4-1AC1 x Elta Variable Speed Drive IP66 - 1.5KW2 x Speed Controller - REB2.5-N1 x AXC TP - 100mm Plastic Centrifugal Inline Fan2 x CBA-60 Inlet Flange for CBT-601 x Quietflow SQS100-1ECL - Centrifugal Box Fan1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Duct Termination with Mesh - 100mm1 x AIRVENT speed control - AIR4019613 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT2 x SAVE VSR 300 heat recovery unit2 x CMT/4-280-115 2.2KW - Single inlet centrifugal fan direct driven ( LG-90)1 x FRQ5-10A Inverter Speed controller3 x VTR 300 STD Filter Kit3 x KMBI 250 Connector rectangular/circular to install on the discharge of CMT2 x Vent Axia Silent 100T (TIMER)1 x GXC6EC - High Performance Extract Fan1 x CBP-18/18-RC Belt Driven Centrifugal Fans2 x GENIOX 11 Internal Mounted Unit1 x KBA- inlet mounting flange for CRMT 2251 x Insulated extract Plenum 8+11 x Insulated extract Plenum 6+11 x Helios RR-250-C Centrifugal inline fan3 x CMT/4-250-100 1.1KW - Single inlet centrifugal fan direct driven ( LG-90)1 x CBT-100N Centrifugal1 x CBM 12-12 1100w 6P Three Phase1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x TUNE-R-250-3-M0 - Control Damper (NO ACTUATOR)1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x KAD-355-F400 Rectangle Flexible Connector1 x Vent Axia ACM 200 inline mixed flow duct fan1 x CMT/4-315/130-4KW - Single inlet centrifugal fan direct driven1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x CSB-60 Centrifugal fan1 x Duct Termination with Mesh - 450mm1 x Round ceiling diffuser 400mm1 x Helios ESA-1 Surface mounted Speed Control 1amp1 x DEF-CBM-RE-7 - Protection Guard1 x DEF-800AN1 x Duct Termination with Mesh - 150mm
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 58.40

I have a loft mount extractor fan which was very noisy. I ...