• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 937.13 (excl. VAT)

£ 1,124.56 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x CMT/4-280-115 2.2KW - Single inlet centrifugal fan direct driven ( LG-90)2 x DDMP 10-08 3F 2210W M6A4 DG01 x AXC TP - 100mm Plastic Centrifugal Inline Fan2 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x Elta Standard Ambient Flexible Connector - 560mm1 x Contactor Interface Station - CI91 x TUNE-R-315-3-M4 - Control Damper1 x TUNE-R-250-1-M2 - Control Damper1 x KBA- Inlet Mounting 2802 x Silentub - STUB 1002 x SPI-100 C Iris damper1 x Speed Controller - REB162 x Duct Termination with Mesh - 355mm1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Helios RR-250-C Centrifugal inline fan1 x TUNE-R-160-3-M0 - Control Damper (NO ACTUATOR)1 x TUNE-R-100-2-M1 - Control Damper1 x Silent 100 Window Kit - windowS1 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x RDH Flange - 02501 x ADH E0-450 Flange - 0450 ADHE/RDHE1 x TUNE-R-315-3-M1 - Control Damper1 x CBA-100 Inlet Flange for CBT-1001 x Remote Timer Control - 13511 x Mini Diffuser - 100mm1 x RDH Flange - 04501 x Transformer Speed Control - RTRE- 5.0Amp1 x Helios ESA-1 Surface mounted Speed Control 1amp1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 200mm2 x Nicotra RDH G2E7-04501 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x Elta Variable Speed Drive IP66 - 7.5KW2 x Control switch - CR1501 x ELTA - Single Phase Transformer 8amps1 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR1 x Helios VARW 450/4 - TK1 x Elta Variable Speed Drive IP66 - 2.2KW1 x FRQ5-10A Inverter Speed controller1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x RDH Flange - 03151 x ADH E0-280 Flange - 0280 ADHE/RDHE1 x Speed Controller - REB11 x 110 x 54mm Round to Rectangular Adaptor - Long1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Helios TSW 1.5 Amp Transformer speed controller1 x Speed Controller - REB2.5-N2 x 110 x 54mm Short Rectangular to Round Adaptor male1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/4-3 Three Phase1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x RR EC 160 Centrifugal inline fan - Energy Efficient Motor4 x Silent 300 CZ Design PLUS Extractor Fan1 x 125mm Round Connector with Damper1 x Ancillary Pack for SB-Biflow 250 model1 x MUB 062 630D4 Multibox1 x HXP450/6-1 - 6 Pole - Single Phase1 x ADH E0-250 Flange - 0250 ADHE/RDHE1 x Elta 3 Amp Electronic single phase speed controller.1 x Duct Termination with Mesh - 400mm1 x Vertical Cowl - RAV630/7101 x Soaker Sheet to suit RA630/7102 x 110 x 54mm Vertical 45 Degree Bend1 x ELTA - Three Phase Transformer 3amps1 x Elta SLC315/4-3AC - IP551 x Mounting Feet (Pair) for SLC-450-060B-04501 x 110 x 54mm Low Profile Plastic Ducting - 1 Meter1 x TUNE-R-560-2-M1 - Control Damper1 x Elta SLC710/4B-3AC - IP551 x CBM 7/7 147w 4P RE-VR2 x 125mm Round Connector1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX630/4-3 Three Phase1 x Transformer Speed Control - RTRE- 3.0Amp1 x Jetflow-HIT Metal inline - 100mm1 x Universal Pipe Fixing Clip1 x GBD EC 560 - Energy Efficient Centrifugal Acoustic Box Fan1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x MFL-160 G4 Filter Box2 x Silent 100 CZ Design 12V Ecowatt + CT-12/162 x Elta SCP500/4-1AC - IP551 x MV EC 100 Multivent1 x 220x90mm to 204x60mm Rectangular Adapter1 x TUNE-R-160-3-M2 - Control Damper1 x 220x90mm x 1m Insulated Rectangular Duct1 x Spiral Ducting 1 meter - 250mm1 x Ancillary Pack for SLC-710 for 4 pole Motors1 x Vent Axia W300310 Controller Electronic 1.5A1 x Bathroom Fan -Envirovent- Silent 100 S (Standard Model)1 x Metal Inline Fan - VENT-355N1 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans2 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x RD31S-4DW.6Q.AL - 121303 (Three Phase)1 x 110 x 54mm Equal Horizontal T-Piece1 x 150mm Round Connector1 x GRA-100 External Grill by S&P1 x TD160 Mixvent - 100mm - TD160-N Standard1 x DPD SATURDAY Delivery Surcharge1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan2 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase1 x OBD 450x450 - for use with 4WAY-5952 x SDD-U Anti Vibration Pads1 x SG-400 Fan Guard for flange connection1 x RDH E0-0400 Mounting Feet (pair)1 x Helios HQW-315/4 - IP551 x Spiral Ducting 1 meter - 450mm1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/2B-3AC Three Phase1 x MWS-75 Transformer controller with TK -7.5A1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)2 x PM230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x Airvent ceiling fan controller1 x RTRD - Three Phase Speed Controller - 4 Amp1 x Electronic extractor fan speed controller - FSC 1.51 x CS2 Current Switch1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged2 x Helios TSW 7.5 Amp Transformer speed controller1 x Speed Controller - REB1-N1 x MTP 10, 10K, Speed control1 x Transformer speed controller - ATC1 - 1.5 Amps1 x Remote controller FLEX - for VEKO INT1 x RRB- transformer controller1 x Speed Controller - REB51 x Vent Axia ACM 150 inline mixed flow duct fan1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Vent Axia T-Series Controller1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-1AC - Single Phase1 x EC6H - Reversible Group Fan Electronic Controller2 x MWS 3 – Transformer Controller With Motor Protection1 x DEF-140T Inlet Guard for the CBT-100N1 x Speed Controller - REB81 x AIRVENT speed control - AIR4019611 x Round ceiling diffuser 400mm1 x CBT-100N Centrifugal
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...