• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 937.13 (excl. VAT)

£ 1,124.56 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

2 x COM-33 x Isolator Switch - ISOSW2 x TG-K Duct temperature sensor1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x Elta 6 Amp Electronic single phase speed controller with TK2 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x EC-Vent Room Unit1 x Elta ACO Panel 149-ACO18B1 x Systemair Save Connect 2.0 Internet Module4 x MWS 1.5 – Transformer Controller With Motor Protection5 x WS - Reversing Switch from Helios Fans1 x BEAS-control module1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5003 x EC6H - Reversible Group Fan Electronic Controller1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6302 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted3 x Electronic extractor fan speed controller - FSC 1.52 x Vent Axia T-Series Controller5 x Transformer (silent) speed controller - RE 3.0 Amp3 x Easy-fix termination kit - High Rise Ventilator - EFT2 x Transformer 5 Speed Controller - ATC1-12TK1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Envirovent G4 Filter - SL-G4/F74 x Helios HQW-200/4 - IP552 x Remote Timer Control - 13512 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE4 x Airvent ceiling fan controller1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT3 x Transformer Speed Control - RTRE- 12.0Amp1 x TG-K3/NTC10-01 - Duct temperature sensor1 x Silent 300 CZ Design PLUS Extractor Fan3 x Elta Variable Speed Drive IP66 - 0.75KW2 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp4 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x Quietflow SQS400-1ECL - Centrifugal Box Fan2 x REE-1 Electronic Speed Controller1 x Two Speed Switch - REGUL-21 x Elta Wall Cowl SWC56/633 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)4 x SG-200 Fan Guard for the HQW 2001 x Multiflow SMB550/4-1AC2 x Transformer (silent) speed controller - RE 1.5 Amp2 x Helios PU10 Speed Potentiometer (Flush Mounted)3 x Speed Controller - REB51 x TG-R room temperature sensor3 x Vent Axia Silent 100T (TIMER)2 x Transformer (silent) speed controller - RE 5.0 Amp5 x Helios HQW-250/4 - IP553 x Helios HQW-315/4 - IP551 x Elta Wall Cowl SWC35/401 x MTP 10, 10K, Speed control1 x GRA-100 External Grill by S&P1 x RDS 7 Helios Transformer Controller With Motor Protection1 x Transformer 5 Speed Controller - ATC1-8TK1 x CBS-60 Outlet Flange for CSB/CBT-602 x Elta Variable Speed Drive IP66 - 2.2KW1 x Vent Axia ACM 200 inline mixed flow duct fan2 x MV-B Dual Switch for use with Helios HQW plate fans,2 x Isolator Switch - EFF-ISO2 x TUNE-R-200-3-M1 - Control Damper1 x Elta Louvre Shutter - 400mm1 x EBM-Papst D4E225-BC01-17 Double inlet1 x Elta Wall Cowl SWC45/501 x CBA-60 Inlet Flange for CBT-601 x Elta Wall Cowl SWC25/312 x REB-CVF 0-10v Controller1 x Helios TSW 1.5 Amp Transformer speed controller2 x RDH FLEX-SQUARE - ADH/RDH 04503 x QPTW 250C Acoustic Twin Fan with Controller1 x Transformer Speed Control - RTRE- 7.0Amp1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x TD Mixvent 800/200 EEXEIIT31 x LFBR 315 G4 - Helios Inline Filter Box - 315mm2 x DDMP 10-08 3F 2210W M6A4 DG02 x Speed Controller - REB102 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)2 x Silent 100 Window Kit - windowS3 x PIR Sensor - PIR41 x Jet Cowl - 315mm4 x CBT-100N Centrifugal2 x DEF-140T Inlet Guard for the CBT-100N4 x Transformer Speed Control - RTRE- 1.5Amp1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x AIRVENT speed control - AIR4019614 x Speed Controller - REB11 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3002 x CBM 9-9 550w 4P VR (Open Motor)1 x Elta 6 Amp Electronic single phase speed controller.1 x Contactor Interface Station - CI91 x MTS10- extractor fan 3 step switch2 x Elta - Room Sensor - Temp/Humid/C021 x Speed Controller - REB1-N1 x VTR 300 STD Filter Kit1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x Vertical Cowl and Fan (Single Phase) - RAV400-4-11 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x SAVE VSR 300 heat recovery unit1 x TG-K Duct temperature sensor1 x TUNE-R-200-3-M4 - Control Damper1 x DDMP 12-12 3F 5700W M6M0 DG71 x UB47- Universal Insulated Terminal1 x Single Deflection Grille 400mm with OBD damper1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x CBS-100 Outlet Flange for CBT-1001 x Transformer 5 Speed Controller - ATC1-4TK2 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm2 x PIR Sensor - PIR21 x EBM-Papst D3G133-BF05-14 Double inlet1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-10TK1 x RDS 11 Helios Transformer Controller With Motor Protection1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x Transformer speed controller - ATC1 - 1.5 Amps1 x REE-2 Electronic Speed Controller1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 58.40

I have a loft mount extractor fan which was very noisy. I ...