• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 850.00 (excl. VAT)

£ 1,020.00 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

1 x Ancillary Pack for SLC-3551 x Control switch - CR1501 x KV DUO 250 EC1 x AC03TO-ADS-VFS-EN-9A (Three Phase)1 x B-flow Impeller HCBB/T-355mm1 x Elta SPA630/6-1AC - IP541 x Mounting Feet (pair) for SB-CON 2501 x PVO 200 (2-POLE) Plate Axial fan1 x CBMT/Q 125-12 1 HEATER KIT1 x Inclined Curb support BI-3 for TH-5001 x ERR 20/1 Centrifugal inline fan1 x CBMT/Q 315-90 3 HEATER KIT1 x Duct Wrap Insulation - AWDW25mm1 x Economy Airvent 150mm Fan1 x Speed Controller - REB1-N1 x HA-600 SLIM Cooker Hood - Stainless Steel2 x Onda Cristal 900 Kitchen Extractor Hood1 x BOX Hood - BOX-INOX-6002 x menorca 900 cooker hood1 x HA-900 N Cooker Hood1 x Manrose 150mm - XF150BTP3 x Belt Drive Cased Axial Fan - 450mm - H version2 x KV 200 L Sileo3 x Etaline 450mm D4 01 (Three Phase)1 x Manrose T12 STANDARD Transformer- T12S1 x Euro Series - Case Axial - ESC500141 x CTVB/4-400 Kitchen/High Temp Roof Fan1 x Soler & Palau - HCBT/4-900/H - IP551 x Soler & Palau TCBT/4-315/H - IP441 x Mounting Feet (Pair) for SLC-900-060B-09001 x Belt Drive Cased Axial Fan - 710mm - L version1 x Helios GigaBox 630mm GBD 630/6/6 centrifugal1 x Elta SCP630-1EC - IP551 x Stainless Steel Single Blade Regulating Damper -150mm1 x CC-710-2.2kw1 x FSD-TD Fire and Smoke Damper, 700mm x 150mm, EASY FIX AF, GALV Case, GALV Blades, PM24-TF1 x Metal Inline Fan - VENT-125NK1 x Elta Turboflow-TF - 560mm - Single phase1 x Access Door for Circular Duct - 250 x 150 - SIZE 151 x 110 x 54mm Low Profile Plastic Ducting - 1 Meter1 x ISA-ILHT-500/560/630 - Anti-vibration mounts1 x DA9/9 Feet1 x Floor Standing Cooler Fan- SRC-4501 x Impeller Side Guard - 250mm1 x DA 15/15 Feet1 x BDS 630/710 RA b/d shutter1 x CBMT/Q 200-30 1 HEATER KIT1 x Elta SPA350/4-1AC - IP441 x Round ceiling diffuser 300mm1 x 125mm Round 45 Degree Bend1 x Soler & Palau - TGT/4-450-6/0.55kW 32 Degree1 x Elta SCP500/4-1AC - IP551 x Elta Turboflow-TF - 630mm - Three phase1 x Etaline 355mm - E2-011 x Kitchen Grease Filter - Mesh Type Non standard 450mm x 150mm x 22mm ( CEF450 Replacement)1 x CBM 9-9 550w 4P CM 3-Phase1 x TXBR/4-500-C1 x Helios TSW 7.5 Amp Transformer speed controller1 x Belt Drive Cased Axial Fan - 900mm - H version1 x FSAF1250C1DA Silencer 1320/201 x Helios HQW-450/4 - IP551 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Ducting 30 Degree Bend - 150mm1 x Kitchen Grease Filter - Mesh Type Non standard 450mmx450mmx22mm Actual1 x Acopel F400-315/1601 x Acopel F400-900/1801 x Raptor SDA560/4-1AC1 x DV-ROF-V-315 Roof mounted unit1 x Push Timer Switch - ZA41 x Soler & Palau - HCBB/2-315/H - IP651 x Purlin Box 800 for RAW Cowls1 x 110 x 54mm Flat Channel Clip (Pack Of 5)1 x Acopel F400-560/1601 x Genius Whole house unit -1 x 2mtr Round Ducting - 125mm1 x CTVB/4-315 Kitchen/High Temp Roof Fan1 x Ducted Outlet Option for H14 - HAP5001 x CMB-2-140-050 0.25Kw LG O1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x DA12/9 Feet1 x 125mm Wall Duct - 350mm1 x EC6H - Reversible Group Fan Electronic Controller1 x Elta Unpodded Silencer Melinex 1D-500mm1 x Elta Unpodded Silencer Melinex 2D-560mm1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x Chaysol SA 25/13 -single inlet centrifugal fan1 x 150mm Round Equal T Piece1 x ZAC- 630 -4-31 x BDS 500/560 RA b/d shutter1 x Flexible PVC Ducting - 220x902 x Soler & Palau - HCBT/4-400/H - IP651 x 110 x 54mm Flat Channel Connector1 x Access Door 200mm x 200mm1 x CMT-2 250-100 3KW - LG0 Single inlet centrifugal fan direct driven1 x Elta Turboflow-TF - 500mm(A) - Three phase1 x Inline Hepa filter with housing & pre-filters1 x Acopel F400-200/1601 x Flexible PVC Ducting - 110x541 x Versio Square Ceiling Diffusers - RS141 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x TD2000 Mixvent - 315mm1 x Elta Unpodded Silencer 1D-250mm1 x Differential Pressure Switch - 100 - 1000 Pa - IP651 x Soler & Palau TCBB/4-500/H - IP651 x CBB-60N Centrifugal1 x Elta SLC450-1EC -IE5 Motor- IP551 x Acopel F400-500/1601 x Belt Drive Cased Axial Fan - 560mm - L version1 x MV-Silent 350 Bathroom Extractor Fan Kit - Standard - No Timer1 x Differential Pressure Switch - 50 - 500 Pa - IP651 x Dektite Combo Pipe Flashing - DC210REC1 x Soler & Palau TCBT/6-800/G - IP651 x Duct Mounted Filter Box - 450mm - M6 grade Bag filter1 x HRT/4-630/25-BPN E221 x Soler & Palau - HCBT/6-800/H - IP651 x ERR 12/1 Centrifugal inline fan1 x Remote Fan Status Indicator - RF11 x Helios GigaBox 500mm GBW 500/4 centrifugal1 x Isolator Switch - ISOSW1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x Manual Overide Switch - MOS1 x CBM 7/7 250W 4P T RE-VR (Three Phase)1 x PBT/4-400 Portable Cooling Fan1 x B-flow Impeller HCBB/T-450mm1 x Soler & Palau - HXTR/4-630/H - IP541 x Soler & Palau TCBT/4-630/H - IP651 x EM 200-E2M 01- Etamaster-2001 x CS2 Current Switch1 x Soler & Palau TCBB/4-450/H - IP651 x Elta SLC560/4B-1AC - IP551 x TUNE-R-125-3-M4 - Control Damper1 x RUCK MTP 20, 10K, Speed control1 x Roof Axial Cowl - RAW10001 x 150mm Wall Duct - 350mm1 x CK-60F Kit1 x Centrif Duo Plus - Timer1 x ACO3TO-ADS-VFC-7.1A1 x CBMT/Q 500-17 3 HEATER KIT1 x DEF-CBM-RE-7 - Protection Guard1 x Soler & Palau - HCBT/4-500/H - IP651 x Soler & Palau - HXBR-250 ECOWATT - IP441 x TTC-2000 Three phase electric heater controller1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-1AC - Single Phase1 x Belt Drive Cased Axial Fan - 630mm - H version1 x Ductwrap Insulation DW501 x 204x60mm Double Airbrick Adapter1 x 125mm - 150mm Round Reducer1 x ELTA - Single Phase Transformer 12amps1 x Soler & Palau - HXTR/4-355/H - IP541 x CTVB/4-200 Kitchen/High Temp Roof Fan1 x Soler & Palau - HXTR/6-800/H - IP541 x KV DUO 400 EC1 x CBA-80 Inlet Flange for CBT-80
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...