• Model:BIFA-313214

Bifurcated Case Axial Fan 315mm (BIFA)

£ 1,466.30 (excl. VAT)

£ 1,759.56 (inc. VAT)

The Bifurcated Case Axial range of fans has been specifically developed to meet the need for an axial fan which can handle atmospheres normally detrimental to the life of the fan motor.

By isolating the motor from the system airstream, the bifurcated fan can handle a wide variety of saturated and dustladen atmospheres, heated air and hot gases.

The range has a split airway with adirect driven motor operating in ambient air within the motor compartment. They are suitable, as standard, for handling air temperatures up to +200°C.

The Bifurcated Case Axial Fan range has a number of accessories available which include: Axial Ancillary Pack, Attenuator, Wire Inlet Guard, Coupling Flanges, Mounting Feet, AV Mounts and Speed Controllers.

Motor

The motors are specially selected to operate within the motor compartment with the airstream in the duct system, at an elevated temperature.

Motors are of the B3 foot mounting type, totally enclosed and fan cooled. Being foot mounted the motors can, in the event of a failure, be readily interchanged with a comparable frame size from a wide range of manufacturers to cover temperatures of up to 200°C.

Where indicated, the motor is suitable for speed control by either an inverter or a 5-step auto transformer speed controller when the ambient air temperature is not higher than 60ËšC.

Electrical

Single phase 220-240V 50 Hz supply are available in 5 sizes:-250, 315,400,450 and 500mm diameter. 250 to 400 diameter in either 2 or 4 pole versions, 500mm diameter in 4 pole. Three phase 380-440V 50Hz supply are available in eleven sizes 250, 315, 400, 450, 500, 560, 630 in either 2 or 4 pole versions (710, 800, 900 and 1000 dia are available as 4 pole).

Impellers and Casing
The aluminium alloy impellers are die cast and have an adjustable pitch which allows a wide range of air outputs to be selected. All the casings are manufactured in steel and hot dipped galvanised to BS EN ISO 1461 after fabrication. Motor mountings and fixings used in the assembly of the fan are zinc plated and passivated.

Form of Running
Bifurcated fans have arrows showing the direction of the impeller rotation and airflow. All models are Form B running.

Terminal Box
To IP55, protected against dust and water jets from any angle, allowing outside applications.

Performance
Tested to BS 848 Part 1 & 2. Published dB(A) figures are free field sound pressure levels at 3m with spherical propagation at a reference level of 2 x 10-5Pa (20 micro-Pascal). The inlet and outlet sound power level spectra figures are dB with a reference of 10-12 Watts (1 pico-watt).

Cooling
External cooling is provided by a fan mounted at the non-drive end of the motor, protected by a cover with a grid air intake. The airflow, guided by the fan cover, is directed longitudinally on the entire periphery of the motor in the channels formed by the frame ribs.

Adequate space is provided within the motor compartment to ensure a plentiful supply of cooling air. The air within the motor compartment must not exceed 40ËšC. For ambients in excess of this, please consult our Technical Services Department for further information.

Customers also purchased...

1 x Ancillary Pack for SLC-3551 x Control switch - CR1501 x KV DUO 250 EC1 x AC03TO-ADS-VFS-EN-9A (Three Phase)1 x B-flow Impeller HCBB/T-355mm1 x Elta SPA630/6-1AC - IP541 x Mounting Feet (pair) for SB-CON 2501 x PVO 200 (2-POLE) Plate Axial fan1 x CBMT/Q 125-12 1 HEATER KIT1 x Inclined Curb support BI-3 for TH-5001 x ERR 20/1 Centrifugal inline fan1 x CBMT/Q 315-90 3 HEATER KIT1 x Duct Wrap Insulation - AWDW25mm1 x Economy Airvent 150mm Fan1 x Speed Controller - REB1-N1 x HA-600 SLIM Cooker Hood - Stainless Steel2 x Onda Cristal 900 Kitchen Extractor Hood1 x BOX Hood - BOX-INOX-6001 x menorca 900 cooker hood1 x HA-900 N Cooker Hood1 x Manrose 150mm - XF150BTP2 x Belt Drive Cased Axial Fan - 450mm - H version2 x KV 200 L Sileo3 x Etaline 450mm D4 01 (Three Phase)1 x Manrose T12 STANDARD Transformer- T12S1 x Euro Series - Case Axial - ESC500141 x CTVB/4-400 Kitchen/High Temp Roof Fan1 x Soler & Palau - HCBT/4-900/H - IP551 x Soler & Palau TCBT/4-315/H - IP441 x Mounting Feet (Pair) for SLC-900-060B-09001 x Belt Drive Cased Axial Fan - 710mm - L version1 x Helios GigaBox 630mm GBD 630/6/6 centrifugal1 x Elta SCP630-1EC - IP551 x Stainless Steel Single Blade Regulating Damper -150mm1 x CC-710-2.2kw1 x FSD-TD Fire and Smoke Damper, 700mm x 150mm, EASY FIX AF, GALV Case, GALV Blades, PM24-TF1 x Metal Inline Fan - VENT-125NK1 x Elta Turboflow-TF - 560mm - Single phase1 x Access Door for Circular Duct - 250 x 150 - SIZE 151 x 110 x 54mm Low Profile Plastic Ducting - 1 Meter1 x ISA-ILHT-500/560/630 - Anti-vibration mounts1 x DA9/9 Feet1 x Floor Standing Cooler Fan- SRC-4501 x Impeller Side Guard - 250mm1 x DA 15/15 Feet1 x BDS 630/710 RA b/d shutter1 x CBMT/Q 200-30 1 HEATER KIT1 x Elta SPA350/4-1AC - IP441 x Round ceiling diffuser 300mm1 x 125mm Round 45 Degree Bend1 x Soler & Palau - TGT/4-450-6/0.55kW 32 Degree1 x Elta SCP500/4-1AC - IP551 x Elta Turboflow-TF - 630mm - Three phase1 x Etaline 355mm - E2-011 x Kitchen Grease Filter - Mesh Type Non standard 450mm x 150mm x 22mm ( CEF450 Replacement)1 x CBM 9-9 550w 4P CM 3-Phase1 x TXBR/4-500-C1 x Helios TSW 7.5 Amp Transformer speed controller1 x Belt Drive Cased Axial Fan - 900mm - H version1 x FSAF1250C1DA Silencer 1320/201 x Helios HQW-450/4 - IP551 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Ducting 30 Degree Bend - 150mm1 x Kitchen Grease Filter - Mesh Type Non standard 450mmx450mmx22mm Actual1 x Acopel F400-315/1601 x Acopel F400-900/1801 x Raptor SDA560/4-1AC1 x DV-ROF-V-315 Roof mounted unit1 x Push Timer Switch - ZA41 x Soler & Palau - HCBB/2-315/H - IP651 x Purlin Box 800 for RAW Cowls1 x 110 x 54mm Flat Channel Clip (Pack Of 5)1 x Acopel F400-560/1601 x Genius Whole house unit -
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...