• Model:CADB/T-HE54

CADB/T-HE 54 ECOWATT Series

£ 11,212.47 (excl. VAT)

£ 13,454.96 (inc. VAT)

Compact heat recovery unit with high- efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54). Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB-HE DC ECOWATT
Heat recovery units with built-in electric heater battery. The 3-Way valve is provided as an accessory (see accessories table for this series)
CADB/T-HE DI ECOWATT
Heat recovery units with built-in low pressure hot water coil.
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F. Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Additional information
CADB-HE- Single fase (1/230V 50 Hz).
CADT-HE- Only DI versions: single fase fans and three fase coils (3/400V 50Hz).
Airflows from 450 to 5.400 m 3 /h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
1 x Stainless Steel Single Blade Regulating Damper -200mm1 x Access Door for Circular Duct - 300 x 200 - SIZE 501 x Ancillary Pack for SLC-5001 x MFA-AR/AXC 315 mounting foot1 x HCFB/4-400mm plastic impeller plate fan1 x CRBB/3-250/084M EC 2H01 x DDMP 10-10 FLANGE1 x Helios HQW-200/2 - IP551 x 204x60mm Equal T Piece1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 515watt VR RE1 x Elta Wall Cowl SWC45/501 x Insulated extract Plenum 6+11 x 100mm - 125mm Round Reducer1 x CADB/T-HE 54 ECOWATT Series1 x Metal Inline Fan - VENT-355N1 x Helios GigaBox 355mm GBD 355/4/4 centrifugal1 x Elta Unpodded Silencer 1D-250mm1 x SEL355/2-1AC1 x Etaline 355mm - E2-011 x Helios GigaBox 355mm GBW 355/4 centrifugal1 x Etaline 355mm - D2 01 3 Phase1 x Etaline 355mm E4 011 x DEF-800AN1 x K 200 L Sileo1 x 150mm Round Wall Plate1 x Elta Standard Ambient Flexible Connector - 450mm1 x Elta SCP560/4-1AC - IP551 x Helios GigaBox 400mm GBD 400/4/4 centrifugal1 x SG AW 910 Guard grille (GFC)1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x JETLINE-200 - In Line Centrifugal Duct Fan1 x 150mm - 100mm Round Reducer1 x FSAF315B2DX Silencer 355/81 x ACO3TO-ADS-VFC-7.1A1 x HRT/4-630/25-BPN E221 x CBMT/Q 400-55 1 HEATER KIT1 x KV DUO 400 EC1 x IDEO 325 Ecowatt1 x Soler & Palau TCBB/6-500/H - IP651 x Impeller Side Guard - 400mm1 x Commercial Activated Carbon Filters - Panel Type - 18" x 18" x 1 - ACP1 x Etaline 710mm - D4 02 3 Phase1 x Metallic Kitchen Extractor - CK35N1 x EVL Filter G4 grade for PIV units1 x TUNE-R-160-3-M2 - Control Damper1 x Elta Cased Axial Flange - 400mm1 x HRB/6-630-30-APN1 x DV-ROF-V-315 Roof mounted unit1 x Synthetic Air Filter Media - 10mm x 2mtr x 5mtr Roll1 x Acopel F400-120/1601 x WSD 042 (730x730x70)1 x Elta SLC450-1EC -IE5 Motor- IP551 x Binks Bullows - Spray Booth Filter1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF400/4-3AC - Three Phase1 x TecFire Intumescent Damper - Rectangular 250x250mm1 x Soler & Palau - HCBB/4-630/H -IP651 x Jetflow-HIT Metal inline - 200mm1 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-9000/500 ND - Pack 71 x Biflow SB315-CON4-1 - High Temperature Bifurcated Fan1 x HCFT/4-800mm plastic impeller plate fan1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x CPTA-E Flush mounted PIR sensor with timer1 x Differential Pressure Switch - 200 - 1000 Pa - IP541 x Delivery Surcharge1 x Acopel F400-630/1601 x Etaline 280mm1 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x Acopel F400-710/1801 x Differential Pressure Switch - 20 - 300 Pa - IP651 x 100mm Round Wall Plate1 x CMB-2-140-050 0.25Kw LG O1 x Rotorex HXBR 250mm Plate Axial Fan - Single Phase (2-pole)1 x Etaline 315mm - E2 03 (Low Power Version)1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x CBM 10/10 4 Pole 550watt RE VR (3 Phase)1 x BDS 200/250 RA b/d shutter1 x External weather louvre 500w x 500h - WL501 x 220x90mm 45 Degree Vertical Bend1 x Belt Drive Cased Axial Fan - 560mm - L version1 x KRJ - 250 Inlet Guard1 x Airvent ceiling fan controller1 x Soler & Palau - HXBR/4-315/H - IP541 x 316 grade Stainless Steel Jet Cowl Ventilation Outlet - 500mm1 x Elta SLC400/4-1AC - IP551 x Elta SCP250/4-1AC - IP551 x Contra Rotating TCBBx2-630 Cased Axial - Single Phase - IP65 - Soler & Palau1 x Acopel F400-500/1601 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x Etaline 400mm D2-01 3-phase1 x TXBR/4-450-C1 x Raptor SDA560/4-1AC1 x SPI-200 C Iris damper1 x 125mm - 150mm Round Reducer1 x Elta SCP400-1EC - IP551 x Acopel F400-315/1601 x FU 075 03 Frequency Converter (IP55 Version)1 x Differential Pressure Switch - 50 - 500 Pa - IP651 x TD2000 Mixvent - 315mm1 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x Soler & Palau TCBB/6-400/H - IP441 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x CBMT/Q 500-17 3 HEATER KIT1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Belt Drive Cased Axial Fan - 450mm - H version1 x Synthetic Air Filter Media - 6mm x 2mtr x 5mtr Roll1 x Elta SLC560/4A-1AC - IP551 x Soler & Palau TCBT/6-560/H - IP651 x Isolator Switch - EFF-ISO1 x Belt Drive Cased Axial Fan - 450mm - L version1 x Inline Hepa filter with housing & pre-filters1 x GENIOX 11 Roof Mounted External Unit1 x IP65 Remote Speed Adjustment Station1 x Soler & Palau - HXTR/2-250/H - IP441 x Duct Mounted Filter Box - G4 Grade Panel - 355mm1 x Control switch - CR1501 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x CC-710-2.2kw1 x Soler & Palau TCBT/4-630/H - IP651 x Prio 150E2 circular duct fan1 x Soler & Palau - HXBR/4-630/H - IP541 x Soler & Palau - HXBR/6-630/H - IP541 x Soler & Palau - HXBR-200 ECOWATT - IP441 x 220x90mm Elbow Bend with 150mm Fixed Spigot1 x DA9/7 Feet1 x Painting Charge For Extlvr1 x Chaysol SA 18/8 RTC CW-single inlet centrifugal fan1 x Helios DDF-400 Roof Cowl1 x Soler & Palau - HCBB/6-450/H - IP65
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...