• Model:CADB/T-HE54

CADB/T-HE 54 ECOWATT Series

£ 11,212.47 (excl. VAT)

£ 13,454.96 (inc. VAT)

Compact heat recovery unit with high- efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54). Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB-HE DC ECOWATT
Heat recovery units with built-in electric heater battery. The 3-Way valve is provided as an accessory (see accessories table for this series)
CADB/T-HE DI ECOWATT
Heat recovery units with built-in low pressure hot water coil.
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F. Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Additional information
CADB-HE- Single fase (1/230V 50 Hz).
CADT-HE- Only DI versions: single fase fans and three fase coils (3/400V 50Hz).
Airflows from 450 to 5.400 m 3 /h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x ELM 25 EX Flexible Cuff for ERM 2501 x TD Mixvent Twin Base Kit - 8001 x HCFB/4-500mm plastic impeller plate fan1 x LINEO 200 QUIET ES1 x 110 x 54mm Flat Channel Connector1 x Raptor SDA450/46-3AC1 x Kitchen Grease Filter - Mesh Type Non standard 450mm x 150mm x 22mm ( CEF450 Replacement)1 x Ducting T Piece Equal - 315mm1 x Ducting 30 Degree Bend - 180mm1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Soler & Palau - TGT/4-450-6/0.55kW 32 Degree1 x KABT High Temp Acoustic Kitchen Fan & Inverter Kit - KABT/4-12000/560 ND - Pack 51 x Curved boot - 180mm1 x Belt Drive Cased Axial Fan - 450mm - L version1 x Kitchen Grease Filter - Mesh Type Non standard 296mmx296mmx22mm1 x FSAF500FTX 500 mounting feet (Pair)1 x Elta ACO Panel 149-ACO14E1 x DA7/9 Feet1 x AL 355 Mounting Feet (Pair)1 x 110 x 54mm Low Profile Plastic Ducting - 1 Meter1 x MFA-AR/AXC 315 mounting foot1 x Elta - HTS450/4-1 - Case Mounted Circulating Axial Fan1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/6-15000/710 ND - Pack 101 x Kitchen Grease Filter - Mesh Type NON standard 195H x 597W x 47mm Actual1 x KVK Slim 200 - Low profile Semi Acoustic Box Fan1 x DA9/9 Feet1 x Helios VARW 450/4 - TK1 x ERR 20/1 Centrifugal inline fan1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT350/4-3AC1 x ACO 149-ACO1/EDV1 x KABT High Temp Acoustic Kitchen Fan & Inverter Kit - KABT/4-3000/315 ND - Pack 11 x Elta Standard Ambient Flexible Connector - 350mm1 x Elta Standard Ambient Flexible Connector - 250mm1 x Acopel F400-180/160
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...