• Model:CADB/T-HE54

CADB/T-HE 54 ECOWATT Series

£ 11,212.47 (excl. VAT)

£ 13,454.96 (inc. VAT)

Compact heat recovery unit with high- efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54). Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB-HE DC ECOWATT
Heat recovery units with built-in electric heater battery. The 3-Way valve is provided as an accessory (see accessories table for this series)
CADB/T-HE DI ECOWATT
Heat recovery units with built-in low pressure hot water coil.
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F. Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Additional information
CADB-HE- Single fase (1/230V 50 Hz).
CADT-HE- Only DI versions: single fase fans and three fase coils (3/400V 50Hz).
Airflows from 450 to 5.400 m 3 /h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
1 x HCFT/6-1000-HX plastic impeller plate fan1 x EBM Papst W3G630-GG97-011 x Elta SCP630-1EC - IP551 x HRB/6-630-25-BPN1 x Soler & Palau - HCBT/4-1000/H-X - IP551 x Multiflow SMB450/4-3AC1 x Helios GigaBox 450mm GBW 450/4 centrifugal1 x AW Sileo EC Plate Axial Fan - Three Phase - 630mm1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 515watt VR RE1 x HRB/6-630-30-BPN1 x CBM 10/10 - 750watt 4P RE VR (3 Phase)1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x Curved boot - 560mm1 x Etaline 315mm - E2 03 (Low Power Version)1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x Helios VARW 500/4 - TK1 x Manrose Humidistat - 13611 x Etaline 200mm E2M 01 3-Speed1 x Female Ducting Connector - 560mm1 x BDS 200/250 RA b/d shutter1 x DA12/9 Feet1 x Acopel F400-400/1601 x Atex Inline Fan 250mm - ERM25EXE1 x Anti Vibration Mounts - Small - Pack of 4 - AVM21 x Jetflow Silent SJMF-S 250-1EC1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 315mm1 x Elta SLC500/2B-3AC - IP551 x 125mm Round Wall Plate1 x Flanged Damper 019-0250-STD1 x HQS Bathroom Axial Flow Fan - 125mm1 x Flanged Spigot - 100mm1 x Acopel F400-315/1601 x Duct Mounted Filter Box - MINICELL F7 Grade Panel Filter 315mm Spigot1 x VKS 355-500 Automatic shutter1 x Etaline 250mm1 x 110 x 54mm Flat Channel Connector1 x DA12/12 Feet1 x Elta Turboflow-TF - 500mm(B) - Three phase1 x BDS 500/560 RA b/d shutter1 x Duct Mounted Filter Box - 500mm - M6 grade Bag filter1 x Acopel F400-800/1801 x Jetflow-HIT Metal inline - 150mm
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 119.00

I've had 2 of these fans for 4 years now, and they are great...