• Model:CADB/T-HE54

CADB/T-HE 54 ECOWATT Series

£ 11,212.47 (excl. VAT)

£ 13,454.96 (inc. VAT)

Compact heat recovery unit with high- efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54). Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB-HE DC ECOWATT
Heat recovery units with built-in electric heater battery. The 3-Way valve is provided as an accessory (see accessories table for this series)
CADB/T-HE DI ECOWATT
Heat recovery units with built-in low pressure hot water coil.
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F. Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Additional information
CADB-HE- Single fase (1/230V 50 Hz).
CADT-HE- Only DI versions: single fase fans and three fase coils (3/400V 50Hz).
Airflows from 450 to 5.400 m 3 /h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
1 x OZEO ECOWATT 2 Wired Low Energy Whole House Extract Ventilation Unit1 x Ducting Y Piece - 1000mm1 x MEV 160 & 300 FT (FastTrack) Additional Spigots1 x Compact SCD450/4-3AC1 x Ducting 15 Degree Bend - 1000mm1 x Ducting Reducer Long - 1000mm to 630mm1 x Compact SCD450/4-1AC1 x MFA-AR/AXC 315 mounting foot1 x Elta Qube SQU Centrifugal Box Fan - SQU23/4-3HTS - Three Phase1 x Elta Wall Cowl SWC35/401 x Duct Split Rings (Pair) -1000mm1 x Raptor SDA450/6-1AC1 x Male Ducting Connector - 630mm1 x Elta SLC800/4A-3AC - IP551 x Soler & Palau TCBT/6-800/H - IP651 x Jetflow-HIT Metal inline - 250mm1 x Spiral Ducting 1 meter - 180mm1 x ELTA - Single Phase Transformer 4amps1 x Soler & Palau - HCBT/6-450/H - IP651 x PRIO 400 EC, Axial circular duct fan - EC motor1 x Etaline 355mm - E2-012 x Anti Vibration Mounts - Small - Pack of 4 - AVM21 x Soler & Palau - HCBT/4-450/H - IP651 x Spiral Ducting 3 Meters - 630mm1 x Acoustic Box Fans (Inline) - CAB-1001 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x Ducting 45 Degree Bend - 450mm1 x 125mm Round Connector1 x 125mm Wall Duct - 350mm1 x Ducting T Piece Equal - 300mm1 x Jetflow-HIT Metal inline - 125mm1 x HXP500/6-1 - 6 Pole - Single Phase1 x Etaline Max-Fan - 315mm - E2 011 x 100mm - 125mm Round Reducer1 x Curved boot - 450mm1 x Elta SCP500-1EC - IP551 x HRB/2-200-BPN1 x Belt Drive Cased Axial Fan - 800mm - L version1 x HCFB/4-500mm plastic impeller plate fan1 x HCFT/4-450mm plastic impeller plate fan1 x Multiflow SEL400/4-1AC1 x Jetflow Silent SJMF-S 250-1EC1 x Acoustic MiniBox Fan - MINI-BOX 1251 x Elta SCP500/4-1AC - IP551 x Ducting T Piece Equal - 450mm
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...