• Model:CADB/T-HE54

CADB/T-HE 54 ECOWATT Series

£ 11,212.47 (excl. VAT)

£ 13,454.96 (inc. VAT)

Compact heat recovery unit with high- efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54). Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB-HE DC ECOWATT
Heat recovery units with built-in electric heater battery. The 3-Way valve is provided as an accessory (see accessories table for this series)
CADB/T-HE DI ECOWATT
Heat recovery units with built-in low pressure hot water coil.
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F. Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Additional information
CADB-HE- Single fase (1/230V 50 Hz).
CADT-HE- Only DI versions: single fase fans and three fase coils (3/400V 50Hz).
Airflows from 450 to 5.400 m 3 /h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
1 x Rosenberg RS-315M.3EF Centrifugal Inline Fan1 x 125mm - 150mm Round Reducer1 x Metal Inline Fan - VENT-315NK1 x Etaline 400mm D2-01 3-phase1 x 110 x 54mm Elbow Bend Female1 x Inline Axial Fan - VOK-C 3151 x 110 x 54mm Flat Channel Connector1 x 110 x 54mm Low Profile Plastic Ducting - 2 Meter1 x EM 315-E2M 01- Etamaster-3151 x Helios GigaBox 400mm GBD 400/4/4 centrifugal1 x 125mm Round Condensation Trap1 x 125mm Round Connector with Damper1 x EM 400 E4M 01 - Mixed Flow Duct Fan - 400mm1 x Duct Mounted Filter Box - G4 Grade Panel - 150mm1 x JETLINE-250 - In Line Centrifugal Duct Fan1 x HCFT/4-400/H-BPN E20,P 0.25KW1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 400mm1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-12000/560 ND - Pack 81 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x EKHR 280-2SW BCMI1 x Elta SPA400/4-1AC - IP541 x Elta Unpodded Silencer Melinex 1D-500mm1 x Elta SCP400/4-1AC - IP551 x Elta Unpodded Silencer Melinex 2D-450mm1 x Genius Whole house unit -1 x Duct Mounted Filter Box - G4 Grade Panel - 400mm1 x KABT High Temp Acoustic Kitchen Fan & Inverter Kit - KABT/4-4000/355 ND - Pack 21 x Duct Mounted Filter Box - 500mm - M6 grade Bag filter1 x Curved boot - 900mm1 x Duct Termination with Mesh - 200mm1 x IK - Inspection Door & Drain Plug for TLZ 450 R1 x MTS10- extractor fan 3 step switch1 x Hydor HPA400/4-1A1 x 204x60mm to 125mm Insulated Straight Adapter1 x CRBB/4-355/112D PRMI 230v1 x BF VVX-200 - Villavent Filter1 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x Helios GigaBox 250mm GBW 250/4 centrifugal
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...