• Model:CADB-HE-D08

CADB/T-HE PRO-REG Series

£ 4,946.68 (excl. VAT)

£ 5,936.02 (inc. VAT)

This unit is Model:CADB-HE-D 08 RH PRO-REG VE

Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass in false ceiling versions (Models 04 to 33 ) and 47mm in outdoor versions (Models 45 and 60).
Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB/T-HE D PRO-REG

Heat recovery units without additional incorporated heater.

CADB/T-HE DC PRO-REG
Heat recovery units with built-in hot water coil.
The 3-Way valve is provided as an accessory (see accessories table for this series)

CADB/T-HE DI PRO-REG
Heat recovery units with built-in electric heater battery.

Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B.
Models 33 to 60: EC motors with integrated electronic protection, IP 54 class B.

Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory). It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Control
It includes manual or automatic control for modes: adjustable airflow (VAV), constant pressure (COP) or constant airflow (CAV), via CO2, pressure or airflow sensors (accessories).
Post-heating stage versions (-DC/-DI) allow postheating management depending on the temperatures taken by the temperature probes incorporated in the design.

Ranges of product according to the type of operating control:
VAV- variable air volume
Fan speed can be adjusted with a 0 - 10V signal from the remote touchscreen panel (included) or an external CO2, temperature or humidity sensor (accessories).
CAV - constant air volume
Manual pre-setting of 2 working points the fans are controlled separately, regardless of the degree of fouling of the filters. It is necessary to add two pressure sensors TDP-S as external accessory.
COP - constant pressure
Constant pressure measured by an external pressure sensor TDP-S (accessory). It is necessary to add a pressure sensor TDP-S as an external accessory*.
* To control supply and extract air separately it is necessary to install 2 pressure sensors TDP-S.

Additional information
Single phase (CADB-HE PRO-REG) and three phase models (CADT-HE PRO-REG).
Airflows from 450 to 6100 m3/h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
1 x CSB-60 Centrifugal fan1 x Manrose 150mm - XF150BP2 x 150mm Round Connector1 x GB-WSG 450 External Weather Louvers for the Giga-Box Fans - 450mm1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 515watt VR RE1 x Helios GigaBox 560mm GBD 560/6/6 centrifugal1 x SD-MUB Vibration pad set1 x CBA-80 Inlet Flange for CBT-801 x Rosenberg AKAD 630-4 A1 IP54 400V 50H1 x Cased Axial Fan Extension - 400mm dia1 x Helios GigaBox 500mm GBW 500/4 centrifugal1 x Elta SPA500/4-3EC - IP541 x Etaline Max-Fan - 315mm - E2 011 x Blast Gate (Manual) 300mm1 x Elta Unpodded Silencer 1D-800mm1 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x Elta Unpodded Silencer 1D-560mm1 x CBM 7/7 147w 4P RE-VR1 x CBM 15/15 6p 3phase 2.2kw1 x CBM 7/7 4p 300W RE-VR1 x Elta SCP450-1EC - IP551 x CBM 12/9 515W RE-VR1 x CBM 12-12 1100w 6P Three Phase1 x Soler & Palau - HCBT/4-450/H - IP651 x Elta SCP450/4-3AC - IP551 x Helios HQW-450/6 - IP551 x Systemair ZAP- 4pole - Three phase -450mm - IP541 x CBM 10/10 - 373watt - 6 Pole1 x CBM 7/9 6p 72W RE-VR1 x Soler & Palau - HXBR/4-450/H - IP541 x Elta SPA450/4-1AC - IP541 x Hydor HPA450/4-1A1 x HCFB/4-450mm plastic impeller plate fan1 x CBM 7/7 250W 4P T RE-VR (Three Phase)1 x Dynair QCM 454 T - 3 phase1 x Systemair AW-Sileo 450-E62 x CBM 12/9 CM/AL 1100W 6PT - Closed Motor1 x Elta SPA450/46-3AC - IP541 x CBM 9-9 550w 4P VR (Open Motor)1 x CBM 7/7 72w 6P RE-VR1 x Soler & Palau - HCBT/6-450/H - IP651 x Soler & Palau - HXTR/4-450/H - IP541 x DA 7-7 72w 6P VR1 x Soler & Palau - HCBB/6-450/H - IP651 x CBM 9-9 550w 4P CM 3-Phase - 51284180001 x CBM 9-9 550w 4P CM 3-Phase1 x CBM 7/9 4p 300W RE-VR1 x Helios HQW-450/4 - IP551 x HRB/4-450-30-APN2 x Helios GigaBox 315mm GBW 315/4 centrifugal1 x Flat Roof Terminal -OFT 5 - Bitumen1 x Access Door for Circular Duct - 400 x 300 - SIZE 631 x Metal Inline Fan - VENT-400K - T (3 Phase)1 x Impeller Side Guard - 560mm1 x Soler & Palau - HXBR/4-500/H - IP541 x TD Mixvent Twin Base Kit - 8002 x Electronic extractor fan speed controller - FSC 1.51 x MV-Silent 350 Bathroom Extractor Fan Kit - Timer1 x Airvent Ceiling Sweep Fan - 56 inch - 4441241 x Ancillary Pack for SB-CYL 400 model1 x Helios GigaBox 250mm GBW 250/4 centrifugal1 x B-flow Impeller HCBB/T-560mm1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 560mm1 x Access Door for Circular Duct - 300 x 200 - SIZE 351 x Belt Drive Cased Axial Fan - 710mm - H version1 x PML230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x Atex Inline Fan 200mm - ERM22EXE1 x Ancillary Pack for SLC-5601 x Soler & Palau - HCBT/4-800/H - IP551 x LV100-PS 12v Pullcord Operated Bathroom Fan1 x CRVT/4-500 N Roof mounted Fan - vertical discharge1 x Helios TSW 5 Amp Transformer speed controller1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 630mm1 x Metal Inline Fan - VENT-200NK1 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x KRJ - 250 Inlet Guard1 x Circular Ceiling Diffuser - TST 1251 x Soler & Palau - HCBB/6-560/H - IP651 x Purlin Box 800 for RAW Cowls1 x Miniflow SMF Horizontal Roof Cowl SMF20/301 x Biflow SB315-CON2-3 - High Temperature Bifurcated Fan1 x Etaline 200mm E2M 01 3-Speed1 x Acopel F400-400/1601 x AKOR T3/7 Spare Motor1 x Impeller Side Guard - 315mm1 x Elta Viper SCC Duct Mounted Centrifugal Fan - SCC560-1AC1 x Elta SLC500/4B-1AC - IP551 x Flexible PVC Ducting - 204x601 x Etamaster EM 150 L EC 01 inline mix-vent fan1 x Manrose 150mm - XF150BHP1 x Jetflow-HIT Metal inline - 150mm1 x Metallic Kitchen Extractor - CK35N1 x Elta SPA500/4-1AC - IP541 x Elta SCP500/4-1AC - IP551 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 400mm1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x Elta SLC1000/4B-3AC - IP551 x Soler & Palau - HXTR/4-500/H - IP541 x Elta Powder Coated Cased Axial Flange - 630mm1 x Soler & Palau - HCBT/6-800/H - IP651 x 125mm Insulated 90 Degree Bend
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...