• Model:CADB-HE-D08

CADB/T-HE PRO-REG Series

£ 5,194.01 (excl. VAT)

£ 6,232.81 (inc. VAT)

This unit is Model:CADB-HE-D 08 RH PRO-REG VE

Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass in false ceiling versions (Models 04 to 33 ) and 47mm in outdoor versions (Models 45 and 60).
Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB/T-HE D PRO-REG

Heat recovery units without additional incorporated heater.

CADB/T-HE DC PRO-REG
Heat recovery units with built-in hot water coil.
The 3-Way valve is provided as an accessory (see accessories table for this series)

CADB/T-HE DI PRO-REG
Heat recovery units with built-in electric heater battery.

Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B.
Models 33 to 60: EC motors with integrated electronic protection, IP 54 class B.

Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory). It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Control
It includes manual or automatic control for modes: adjustable airflow (VAV), constant pressure (COP) or constant airflow (CAV), via CO2, pressure or airflow sensors (accessories).
Post-heating stage versions (-DC/-DI) allow postheating management depending on the temperatures taken by the temperature probes incorporated in the design.

Ranges of product according to the type of operating control:
VAV- variable air volume
Fan speed can be adjusted with a 0 - 10V signal from the remote touchscreen panel (included) or an external CO2, temperature or humidity sensor (accessories).
CAV - constant air volume
Manual pre-setting of 2 working points the fans are controlled separately, regardless of the degree of fouling of the filters. It is necessary to add two pressure sensors TDP-S as external accessory.
COP - constant pressure
Constant pressure measured by an external pressure sensor TDP-S (accessory). It is necessary to add a pressure sensor TDP-S as an external accessory*.
* To control supply and extract air separately it is necessary to install 2 pressure sensors TDP-S.

Additional information
Single phase (CADB-HE PRO-REG) and three phase models (CADT-HE PRO-REG).
Airflows from 450 to 6100 m3/h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
1 x EBM-Papst D3G160-BP03-15 Double inlet1 x AMD-630/2 - High Performance Cased Axial Fan1 x CC-SHT 404 (4-pole)1 x Flakt Woods HT31JM2/16/2/5/40-321 x Duct Termination with Mesh - 250mm1 x CCpro 40 (1CC9402) Long Casing Extension1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x DDMP 12-12 3F 1810W M6A4 DG01 x ACO8AC/EC AutoChangeover panel1 x Transformer Speed Control - RTRE- 7.0Amp1 x Vent Axia T-Series Controller1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Helios TSW 7.5 Amp Transformer speed controller1 x Remote controller FLEX - for VEKO INT1 x Transformer 5 Speed Controller - ATC1-10TK1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Helios TSW MCB Amp Transformer speed controller1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Helios TSW 1.5 Amp Transformer speed controller1 x RTRD - Three Phase Speed Controller - 7 Amp1 x DEF-140T Inlet Guard for the CBT-100N1 x Systemair Save Connect 2.0 Internet Module1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x 7 Day Programmable TIMECLOCK1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x EBM-Papst D2E097-BK76-98 Double inlet1 x WS - Reversing Switch from Helios Fans1 x ERR 31/1 Centrifugal inline fan1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box1 x Remote Timer Control - 13511 x Electronic extractor fan speed controller - FSC 1.51 x ELM 18 EX Flexible Cuff for ERM 181 x REE-1 Electronic Speed Controller1 x RTRDU 3 Phase Trickle & Boost 5 Step Speed Controller - 2 Amps1 x Elta 10 Amp Electronic single phase speed controller.1 x Speed Controller - REB31 x CBS-60 Outlet Flange for CSB/CBT-601 x Speed Controller - REB5
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...