• Model:443319L

Lo-Carbon Sentinel Kinetic BH - LEFT

£ 1,199.00 (excl. VAT)

£ 1,438.80 (inc. VAT)

Lo-Carbon Sentinel Kinetic BH Left

* Recognised in SAP PCDB
* Lightweight for easier installation
* Horizontal duct option for space-saving installations
* Fits within a 290mm deep kitchen cupboard
* Integrated digital controller for simple and accurate commissioning
* Plug and play control; Humidistat
* BMS connectivity
* LS inputs (Light Switch)
* Horizontal duct options
* Acoustic Enclosure & Top Box options

Stock Ref. No: 443319L

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.

For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.

Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Acoustic Solution

PDF Files


Data Sheet

1 x 7 Day Programmable TIMECLOCK1 x Speed Controller - REB2.5-N1 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x Speed Controller - REB53 x Rectangular Airbrick Adaptor2 x Transformer (silent) speed controller - RE 1.5 Amp1 x Transformer Speed Control - RTRE- 5.0Amp1 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x DEF-CBM-RE-7 - Protection Guard1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x 220x90mm Insulated Rectangular Vertical 90° Bend2 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit3 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)7 x Duct Termination with Mesh - 200mm4 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR3 x Universal Pipe Fixing Clip8 x Duct Termination with Mesh - 250mm7 x ELTA - Single Phase Transformer 2amps9 x CBM 9/7 4p 420W RE-VR7 x Biflow SB250-CON2-3 - High Temperature Bifurcated Fan6 x Duct Termination with Mesh - 315mm2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase6 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)6 x Chaysol DA 9/9 3 speed4 x HXP450/6-1 - 6 Pole - Single Phase3 x CAD-COMPACT 500 ADVANCED N8 - MVHR unit5 x TecFire Intumescent Damper - Rectangular 400x400mm6 x GRA-100 External Grill by S&P1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 1100watt 6PT (Closed Motor)2 x DDMP 12-12 3F 5700W M6M0 DG74 x DDMP 10-08 FLANGE3 x Elta SCP400/4-1AC - IP555 x Spiral Ducting 1 meter - 200mm5 x CBS-100 Outlet Flange for CBT-10010 x 220x90mm x 1m Insulated Rectangular Duct6 x Silentub - STUB 2004 x CBM 7/7 147w 4P RE-VR4 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase5 x DDMP 12-09 1F 1800W M6A4 DA82 x Duct Termination with Mesh - 450mm3 x VA 9/2 T - High Temp Axial Fan,3 x DPD 12PM Delivery Surcharge7 x DDMP 10-08 1F 1000W M6A2 DA53 x Chaysol da 9-7 - 3 Speed1 x Silent 300 CRZ Design PLUS Extractor Fan1 x Impeller Side Guard - 800mm2 x HIMF - Mixed Flow Fan 125mm Inline Fan5 x Vent Axia T-Series Wall Model TX9WL1 x Ancillary Pack for SLC-3552 x Potentiometer EGH 01 - for DDMP Fans2 x Elta Standard Ambient Flexible Connector - 800mm1 x ACOAS/ AC/EC Auto Changeover 8Amp11 x CBT-130N Centrifugal1 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven2 x Ancillary Pack for SLC-4008 x Flanged Damper 019-0500-STD8 x CBT-130N Centrifugal ATEX II 2G Exd IIB T42 x DDMP 10-10 1F 1000W M6A2 DA51 x TUNE-R-200-3-M3 - Control Damper6 x Vent Axia W300310 Controller Electronic 1.5A4 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting6 x ELTA - Three Phase Transformer 3amps1 x Side Withdrawal Casing - 1H x 1W - To suit 100 Panel and 292 HEPA2 x Run On Timer - 5s - 4hrs - RT5A1 x AL 1120 Mounting Flange8 x 125mm Round Connector with Damper2 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x CBB-60N Centrifugal1 x Duct Termination with Mesh - 400mm3 x CBT-170 Centrifugal2 x Spiral end cap - 80mm2 x DDMP 10-10 FLANGE7 x CBA-130 Inlet Flange for CBT-1301 x Ancillary Pack for SLC-900 for SLC900/4A-3AC and SLC900/8-3AC1 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan1 x Atex Inline Fan 180mm - ERM18EXE6 x Elta SCP450/4-1AC - IP553 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 100mm3 x Twinflow STDL315-1EC3 x CFI Lite 600 Carbon Filter2 x BDS 350 RA b/d shutter1 x Flat Roof Terminal -OFT 5 - EPDM5 x Elta SCP315/4-1AC - IP556 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x Elta SCP500/4-3AC - IP552 x Elta Turboflow-TF - 630mm - Three phase1 x DDMP 07/07 Mounting Flange4 x DDMP 12-12 1F 1800W M6A4 DA83 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x LCA403218 - Long Cased Axial Fan2 x REB Ecowatt Speed Control - REB-ECO5 x Elta SLC500/4B-1AC - IP559 x Helios VARW 450/4 - TK1 x Elta Quietflow Twin SQT125-1ECL4 x ELTA - Single Phase Transformer 4amps1 x FLEX CONNECTOR FOR MFQ-560 FAN1 x Singleflow SSDL200-1EC1 x DDMP 12-12 FLANGE2 x 204x60mm to 220x90mm Rectangular Adapter8 x Helios PA10 Speed Potentiometer2 x Ancillary Pack for SB-Biflow 250 model2 x Ancillary Pack for SB-Biflow 315 model4 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x KBA- Inlet Mounting 1801 x Vent Axia ACM 200 inline mixed flow duct fan1 x RUCK MTP 20, 10K, Speed control4 x DDMP 12-09 FLANGE1 x Soaker Sheet to suit RA8002 x 110 x 54mm Short Rectangular to Round Adaptor male1 x CBB-80N Centrifugal1 x MV-Silent 350 Bathroom Extractor Fan Kit - Timer3 x Purlin Box 630/710 for RAW Cowls1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting2 x ERM180EXE Bracket1 x Elta Standard Ambient Flexible Connector - 350mm2 x Elta Turboflow-TF - 450mm - Single phase1 x Elta SCP315/4-3AC - IP551 x Access Door for Circular Duct - 400 x 300 - SIZE 632 x ELTA - Single Phase Transformer 8amps1 x Elta SCP500/4-1AC - IP551 x Jetflow Silent SJMF-S 200-1EC1 x MUB 062 630D4 Multibox1 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x AXC 355-6/19°-2(B)-P (0.75 kW) - Smoke Extract Fan1 x TD ECOWATT 160/100 Inline Duct Fan - TD-ECOWATT1 x Elta Short Cased ATEX Axial fan - SCX050L2-A9/161 x Blast Gate (Manual) 355mm1 x Airvent ceiling fan controller1 x Elta Standard Ambient Flexible Connector - 710mm1 x Multiflow SMB550/4-1AC1 x RDH E0-0400 Mounting Feet (pair)1 x Elta SCP350/4-1AC - IP551 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x EC Trickle and boost module - IP561 x Transformer (silent) speed controller - RE 5.0 Amp
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 505.88

Delivered super promptly yesterday, next day. Only just fitt...