• Model:443319L

Lo-Carbon Sentinel Kinetic BH - LEFT

£ 1,199.00 (excl. VAT)

£ 1,438.80 (inc. VAT)

Lo-Carbon Sentinel Kinetic BH Left

* Recognised in SAP PCDB
* Lightweight for easier installation
* Horizontal duct option for space-saving installations
* Fits within a 290mm deep kitchen cupboard
* Integrated digital controller for simple and accurate commissioning
* Plug and play control; Humidistat
* BMS connectivity
* LS inputs (Light Switch)
* Horizontal duct options
* Acoustic Enclosure & Top Box options

Stock Ref. No: 443319L

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.

For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.

Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Acoustic Solution

PDF Files


Data Sheet

1 x Multiflow SMB550/4-1AC2 x Elta Variable Speed Drive IP66 - 0.75KW1 x Vent Axia ACM 200 inline mixed flow duct fan2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR2 x Elta - Room Sensor - Temp/Humid/C022 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR4 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR2 x TUNE-R-200-3-M2 - Control Damper3 x CSB-60 Centrifugal fan2 x VEKA INT 2000/15.0-L1 EKO2 x Vertical Cowl and Fan (Single Phase) - RAV400-4-12 x IR24-P - Presence detector3 x Electrostatic Precipitator - 1H x 3W2 x Round ceiling diffuser 200mm2 x GENIOX 11 Roof Mounted External Unit5 x CBA-100 Inlet Flange for CBT-1001 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)3 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x DDMP 10-08 3F 2210W M6A4 DG02 x CO2 Room Sensor - CO2-R1 x 204x60mm Insulated Rectangular Vertical 90° Bend2 x CBM 12-12 1100w 6P Three Phase5 x VTR 500 STD Filter Kit1 x SAVE VSR 300 heat recovery unit2 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C5 x Helios RR-250-C Centrifugal inline fan2 x Lo-Carbon Silhouette 100T (Timer)3 x Helios ZNE Electronic Fan Overrun Timer4 x Duct Termination with Mesh - 355mm3 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x RD35S-4DW.6W.3L - 122297 (Three Phase)1 x AXC TP - 100mm Plastic Centrifugal Inline Fan1 x Comefri - TLZ 560 R - High Performance Scroll Fan2 x ACO8AC/EC AutoChangeover panel1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Comefri - TLZ 450 R - High Performance Scroll Fan2 x CBT-80N Centrifugal1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH4 x Round ceiling diffuser 250mm4 x Potentiometer EGH 01 - for DDMP Fans5 x ACOAS/ AC/EC Auto Changeover 8Amp2 x Flakt Woods ME 1.3 speed controller 3amp - EA9011581 x DS-2 2-Speed Switch (3 Phase)2 x SD-MUB Vibration pad set5 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR2 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)2 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x CK-60F Kit6 x Helios ESA-1 Surface mounted Speed Control 1amp2 x CCpro 40 (1CC9402) Long Casing Extension4 x SPI-100 C Iris damper2 x CFI In-line 150 - Carbon Filter3 x Duct Termination with Mesh - 100mm2 x KBA- Inlet Mounting 2252 x Flakt Woods ME 1.6 speed controller 6.0amp - EA9011594 x ACO3TO-ADS-VFC-7.1A2 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR6 x Mini Diffuser - 100mm2 x Vent Axia Trickle & Boost Switch2 x Flakt Woods ME 1.1 speed controller 1amp - EA9011572 x WSD 100 (1060x1060x70)4 x 100mm Round Connector with Damper4 x Helios HQW-355/4 - IP552 x KBA- Inlet Mounting 3152 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm4 x RUCK MTP 20, 10K, Speed control2 x DDMP 07/07 Mounting Flange6 x CBS-100 Outlet Flange for CBT-1005 x Elta SCP400/4-1AC - IP552 x KBA- Inlet Mounting 1804 x CBM 7/7 147w 4P RE-VR2 x Transformer Speed Control - RTRE- 5.0Amp3 x Elta Variable Speed Drive IP66 - 4.0KW2 x KAD-225-F400 Rectangle Flexible Connector1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)3 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x CBM Low Pressure Centrifugal Fan - CBM 10/8 4 Pole 373watt CVR2 x Skyflow SSR Horizontal Roof Cowl SSR80B2 x Quietflow Twin SQTDCV250-1ECL4 x DDMP 10-10 1F 1000W M6A2 DA52 x Run On Timer - 5s - 4hrs - RT5A2 x FFR 355 Filter Cassette2 x Elta Variable Speed Drive IP66 - 2.2KW1 x Round ceiling diffuser 400mm2 x Elta Variable Speed Drive IP66 - 1.5KW2 x Comefri - TLZ 225 R - High Performance Scroll Fan1 x AXC TP - 150mm Plastic Centrifugal Inline Fan5 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan4 x Elta 2 Amp Electronic single phase speed controller.1 x Elta Variable Speed Drive IP66 - 7.5KW1 x 204x60mm Insulated Rectangular Horizontal 45° Bend1 x TUNE-R-315-3-M4 - Control Damper1 x VKS 355-500 Automatic shutter5 x ELTA - Three Phase Transformer 3amps4 x 110 x 54mm Round to Rectangular Adaptor - Long3 x Flat Roof Terminal -OFT 5 - Asphalt2 x TUNE-R-200-3-M3 - Control Damper3 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan1 x FU 15 16 Frequency Inverter1 x Elta Standard Ambient Flexible Connector - 800mm1 x TD Mixvent 1100/250 EEXEIIT32 x CBT-130N Centrifugal1 x CPTA-E Flush mounted PIR sensor with timer5 x ELTA - Single Phase Transformer 2amps4 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan1 x Silentub - STUB 2005 x Duct Termination with Mesh - 150mm4 x CBB-60N Centrifugal2 x CBA-160 Inlet Flange for CBT-1602 x REU 3amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3002 x VA 9/2 T - High Temp Axial Fan,2 x Backdraught Shutters 039-SFSV-63/714 x DDMP 12-12 3F 5700W M6M0 DG72 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)2 x Quietflow SQS250-1ECL - Centrifugal Box Fan3 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan3 x MWS-75 Transformer controller with TK -7.5A2 x EFSC-3N- Single Phase Speed Control1 x FRQ5-4A V2 Inverter Speed Controller2 x Speed Controller - REB31 x Control switch - CR1502 x PM230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Elta 3 Amp Electronic single phase speed controller.3 x 125mm Round Connector with Damper2 x DS-2/2 2-Speed Switch IP54 (Single Phase)5 x Duct Termination with Mesh - 450mm4 x CBB-80N Centrifugal5 x DPD 12PM Delivery Surcharge4 x RDS 1 Helios Transformer Controller With Motor Protection2 x Two Speed Switch - REGUL-22 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit2 x Round ceiling diffuser 300mm1 x Helios TSW 1.5 Amp Transformer speed controller1 x Step switch S-5EC, 0-10V1 x TUNE-R-160-3-M2 - Control Damper2 x DDMP 09/07 Mounting Flange2 x Vent Axia T-Series Wall Model TX6WL1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE2 x DDMP 10-08 FLANGE2 x Elta Quietflow Twin SQT150-1ECL1 x Purlin Box 800 for RAW Cowls3 x DDMP 12-09 1F 1800W M6A4 DA81 x Elta 10 Amp Electronic single phase speed controller.2 x KBA- inlet mounting flange for CRMT 2501 x Vent Axia T-Series Wall Model TX9WL1 x TecFire Intumescent Damper - Rectangular 400x400mm1 x Helios SVR EC 160 B – SlimVent Centrifugal Fan Box1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x CBS-60 Outlet Flange for CSB/CBT-601 x Speed Controller - REB101 x CBA-60 Inlet Flange for CBT-601 x Twinflow STDL315-1EC1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase1 x CBM 9/7 4p 420W RE-VR3 x Remote Timer Control - 13511 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x Binks Bullows - Spray Booth Filter3 x HXP450/6-1 - 6 Pole - Single Phase2 x Vent Axia ACM 100 inline mixed flow duct fan1 x Universal Pipe Fixing Clip2 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Speed Controller - REB61 x GXC6EC - High Performance Extract Fan1 x GENIOX 11 Internal Mounted Unit1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x Electronic extractor fan speed controller - FSC 1.51 x Elta Quietflow Twin SQT125-1ECL2 x Duct Termination with Mesh - 400mm1 x EHB 160 1.0kw - Helios Electric Heater Battery with Control and Sensor.1 x CBM Low Pressure Centrifugal Fan - CBM 12/9 6 Pole 736watt C1 x RUCK MTP 30, Stepped Speed control1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x CBT-170 Centrifugal1 x RTRD - Three Phase Speed Controller - 2 Amp3 x Transformer Speed Control - RTRE- 3.0Amp1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged2 x CMT/4-250-100 1.1KW - Single inlet centrifugal fan direct driven ( LG-90)1 x CMT/4-315/130-4KW - Single inlet centrifugal fan direct driven2 x KBA- Inlet Mounting 2501 x Duct Termination with Mesh - 315mm1 x TD ECOWATT 160/100 Inline Duct Fan - TD-ECOWATT1 x Speed Controller - REB2.5-N1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x Duct Termination with Mesh - 710mm1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Duct Termination with Mesh - 250mm1 x Control with reverse - CR3001 x Rectangular Airbrick Adaptor
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...