• Model:443319L

Lo-Carbon Sentinel Kinetic BH - LEFT

£ 1,199.00 (excl. VAT)

£ 1,438.80 (inc. VAT)

Lo-Carbon Sentinel Kinetic BH Left

* Recognised in SAP PCDB
* Lightweight for easier installation
* Horizontal duct option for space-saving installations
* Fits within a 290mm deep kitchen cupboard
* Integrated digital controller for simple and accurate commissioning
* Plug and play control; Humidistat
* BMS connectivity
* LS inputs (Light Switch)
* Horizontal duct options
* Acoustic Enclosure & Top Box options

Stock Ref. No: 443319L

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.

For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.

Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Acoustic Solution

PDF Files


Data Sheet

1 x Duct Termination with Mesh - 355mm1 x QPTW 250C Acoustic Twin Fan with Controller1 x ENV 100 12v transformer SELV2 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x SPI-100 C Iris damper1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x DDMP 10-10 1F 1000W M6A2 DA51 x CBM 7/7 147w 4P RE-VR1 x Duct Termination with Mesh - 400mm1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x Duct Termination with Mesh - 200mm1 x TD160-NT Mixvent - 100mm - TD160 Timer2 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x ELTA - Three Phase Transformer 3amps1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x Vent Axia ACM 125 inline mixed flow duct fan1 x MWS 3 – Transformer Controller With Motor Protection1 x EC Trickle and boost module - IP562 x Elta Variable Speed Drive IP66 - 2.2KW1 x Speed Controller - REB101 x Transformer (silent) speed controller - RE 3.0 Amp1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Transformer (silent) speed controller - RE 5.0 Amp1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x DDMP 12-12 3F 1810W M6A4 DG02 x Speed Controller - REB11 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x Transformer Speed Control - RTRE- 7.0Amp1 x Elta Variable Speed Drive IP66 - 1.5KW
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...