• Model:443319L

Lo-Carbon Sentinel Kinetic BH - LEFT

£ 1,199.00 (excl. VAT)

£ 1,438.80 (inc. VAT)

Lo-Carbon Sentinel Kinetic BH Left

* Recognised in SAP PCDB
* Lightweight for easier installation
* Horizontal duct option for space-saving installations
* Fits within a 290mm deep kitchen cupboard
* Integrated digital controller for simple and accurate commissioning
* Plug and play control; Humidistat
* BMS connectivity
* LS inputs (Light Switch)
* Horizontal duct options
* Acoustic Enclosure & Top Box options

Stock Ref. No: 443319L

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.

For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.

Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Acoustic Solution

PDF Files


Data Sheet

1 x MTP 10, 10K, Speed control1 x DDMP 12-12 3F 1810W M6A4 DG01 x Potentiometer EGH 01 - for DDMP Fans1 x TUNE-R-160-3-M2 - Control Damper4 x SPI-100 C Iris damper1 x Comefri - TLZ 560 R - High Performance Scroll Fan2 x Helios HQW-355/4 - IP553 x ACOAS/ AC/EC Auto Changeover 8Amp1 x CMT/4-250-100 1.1KW - Single inlet centrifugal fan direct driven ( LG-90)2 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x CBM Low Pressure Centrifugal Fan - CBM 10/8 4 Pole 373watt CVR1 x Helios RR-250-C Centrifugal inline fan1 x CCpro 40 (1CC9402) Long Casing Extension1 x Lo-Carbon Silhouette 100T (Timer)3 x Helios ESA-1 Surface mounted Speed Control 1amp4 x Duct Termination with Mesh - 100mm1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR4 x DDMP 10-10 1F 1000W M6A2 DA53 x DDMP 09/07 Mounting Flange1 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR2 x VTR 500 STD Filter Kit2 x DDMP 07/07 Mounting Flange1 x SD-MUB Vibration pad set4 x 125mm Round Connector with Damper3 x CBT-130N Centrifugal ATEX II 2G Exd IIB T42 x WSD 100 (1060x1060x70)3 x Elta SCP400/4-1AC - IP552 x MEV Spider Additional Spigots1 x TD Mixvent 1100/250 EEXEIIT31 x ACO3TO-ADS-VFC-7.1A1 x Round ceiling diffuser 300mm2 x KBA- Inlet Mounting 2252 x Backdraught Shutters 039-SFSV-63/711 x DS-2/2 2-Speed Switch IP54 (Single Phase)3 x KRJ - 120 Inlet Guard for CBB/CBT fans5 x ELTA - Single Phase Transformer 2amps2 x Helios VARW 450/4 - TK1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3004 x CBM 7/7 147w 4P RE-VR3 x CBB-60N Centrifugal3 x 100mm Round Connector with Damper6 x Duct Termination with Mesh - 150mm3 x Binks Bullows - Spray Booth Filter2 x KBA- Inlet Mounting 1802 x Chaysol DA 9/9 3 speed1 x CBS-100 Outlet Flange for CBT-1002 x CBM Low Pressure Centrifugal Fan - CBM 12/9 6 Pole 736watt C3 x Flat Roof Terminal -OFT 5 - Asphalt4 x RUCK MTP 20, 10K, Speed control1 x Duct Termination with Mesh - 560mm3 x HIMF - Mixed Flow Fan 125mm Inline Fan2 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan2 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm1 x Quadro Micro 100 Filters - Individual3 x ELTA - Three Phase Transformer 3amps3 x DDMP 12-12 3F 5700W M6M0 DG72 x Helios PA10 Speed Potentiometer3 x Universal Pipe Fixing Clip1 x Run On Timer - 5s - 4hrs - RT5A3 x VA 9/2 T - High Temp Axial Fan,2 x Ancillary Pack for SLC-900 for SLC900/4A-3AC and SLC900/8-3AC2 x TD ECOWATT 160/100 Inline Duct Fan - TD-ECOWATT7 x DPD 12PM Delivery Surcharge2 x KBA- Inlet Mounting 2504 x CBT-130N Centrifugal1 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-H6 x Vent Axia T-Series Wall Model TX9WL4 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit2 x Elta SCP315/4-1AC - IP552 x EM30-24 Control Panel Commissioning Service1 x ELTA - Single Phase Transformer 16amps1 x CBT-170 Centrifugal1 x EMI 150L E2M - Acoustic Inline Mixvent Fan1 x Silentub - STUB 2001 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase2 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan4 x Duct Termination with Mesh - 450mm3 x DDMP 12-09 1F 1800W M6A4 DA81 x Economy Airvent 100mm Fan with Timer1 x Economy Airvent 150mm Fan With Pullcord & Shutters3 x DDMP 10-08 FLANGE1 x KBA- Inlet Mounting 3152 x CBB-80N Centrifugal2 x CBA-160 Inlet Flange for CBT-1601 x Elta Standard Ambient Flexible Connector - 800mm1 x SPI-200 C Iris damper1 x RTRD - Three Phase Speed Controller - 2 Amp1 x RTRD - Three Phase Speed Controller - 4 Amp2 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan2 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Duct Termination with Mesh - 355mm2 x ADH E0-250 Flange - 0250 ADHE/RDHE2 x CBA-130 Inlet Flange for CBT-1302 x DDMP 12-12 1F 1800W M6A4 DA81 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan4 x MWS 5 – Transformer Controller With Motor Protection Unit1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp2 x MTS10- extractor fan 3 step switch2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x Chaysol Da 12/12 CMAL - 1100W 6 Pole - Closed Motor - Three Phase1 x KRJ - 225 Inlet Guard1 x MWS-75 Transformer controller with TK -7.5A2 x PM230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x REE-1 Electronic Speed Controller1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x Silentub - STUB 1002 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x Chaysol Da 15/11 CMAL - 2200W 6 Pole - Closed Motor - Three Phase3 x Duct Termination with Mesh - 200mm1 x CBM 7/9 4p 300W RE-VR1 x CBS-160 Outlet Flange for CBT-1602 x Flanged Damper 019-0500-STD1 x Multi Input Run On Timer - 0 - 20min - CFCU4 x RDS 1 Helios Transformer Controller With Motor Protection3 x HXP450/6-1 - 6 Pole - Single Phase2 x Elta SCP500/4-3AC - IP551 x Elta Quietflow Twin SQT150-1ECL2 x CBT-100N Centrifugal ATEX II 2G Exe II T33 x DDMP 10-08 1F 1000W M6A2 DA51 x Control switch - CR1501 x SG-400 Fan Guard for flange connection1 x OBD 450x450 - for use with 4WAY-5952 x KRJ - 160 Inlet Guard for CBB/CBT fans2 x EC Trickle and boost module - IP561 x Purlin Box 630/710 for RAW Cowls1 x Duct Termination with Mesh - 400mm1 x Vertical Cowl - RAV630/7101 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting2 x TDP-D Pressure Sensor with Display1 x WS - Reversing Switch from Helios Fans1 x MWS 1.5 – Transformer Controller With Motor Protection1 x Helios HQW-315/4 - IP551 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x Elta Short Cased ATEX Axial fan - SCX050L2-A9/161 x Elta Skyflow SSRL710-1EC1 x EHB 160 1.0kw - Helios Electric Heater Battery with Control and Sensor.1 x AKOR Mounting Plate for GD model(VIM166423)1 x CBS-130 Outlet Flange for CBT-1301 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan1 x Temperature Controller - EDTW1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x Elta 2 Amp Electronic single phase speed controller.1 x CBM 9/7 4p 420W RE-VR1 x Vortice Quadro Micro 100 IT HCS - Humidistat/Timer Version1 x MEV300/160 Wireless Boost Switch - SWHWMEV1 x ADH E0-450 Flange - 0450 ADHE/RDHE5 x Duct Termination with Mesh - 250mm1 x CBT-100N Centrifugal1 x KBA- Inlet Mounting 2801 x CMT/4-280-115 2.2KW - Single inlet centrifugal fan direct driven ( LG-90)1 x Electrostatic Precipitator - 1H x 3W1 x Elta SCP500/4-1AC - IP551 x Flanged Damper 019-0560-STD1 x Duct Termination with Mesh - 315mm1 x Biflow SB250-CON2-3 - High Temperature Bifurcated Fan3 x DDMP 09-07 1F 1000W M6A0 DA51 x Vent Axia W300310 Controller Electronic 1.5A2 x SDD-U Anti Vibration Pads1 x Elta Quietflow Twin SQT125-1ECL1 x Elta SCP450/4-1AC - IP551 x Elta SLC500/4B-1AC - IP551 x Elta SCP315/4-3AC - IP551 x KBA- inlet mounting flange for CRMT 2251 x KBA- inlet mounting flange for CRMT 2501 x DA9/9-NT1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x LC080L43-A9-40 - Long Cased Axial1 x Elta HXP 800mm 6-Pole (Three Phase)1 x FU 15 16 Frequency Inverter1 x EC6H - Reversible Group Fan Electronic Controller1 x DVV 560D4-XM/F4001 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x F7 Mini-Cell panel filter - 594 x 5941 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x EM30-24 Electro-Mechanical Control Panel1 x Elta Standard Ambient Flexible Connector - 710mm
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...