• Model:443319L

Lo-Carbon Sentinel Kinetic BH - LEFT

£ 1,199.00 (excl. VAT)

£ 1,438.80 (inc. VAT)

Lo-Carbon Sentinel Kinetic BH Left

* Recognised in SAP PCDB
* Lightweight for easier installation
* Horizontal duct option for space-saving installations
* Fits within a 290mm deep kitchen cupboard
* Integrated digital controller for simple and accurate commissioning
* Plug and play control; Humidistat
* BMS connectivity
* LS inputs (Light Switch)
* Horizontal duct options
* Acoustic Enclosure & Top Box options

Stock Ref. No: 443319L

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.

For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.

Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Acoustic Solution

PDF Files


Data Sheet

1 x DEF-CBM-RE-7 - Protection Guard1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x REE-2 Electronic Speed Controller1 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x 220x90mm x 1m Insulated Rectangular Duct1 x CBM 9/7 4p 420W RE-VR1 x Direct Delivery Surcharge1 x CBS-130 Outlet Flange for CBT-1301 x ELTA - Single Phase Transformer 2amps3 x Biflow SB250-CON2-3 - High Temperature Bifurcated Fan3 x Chaysol DA 9/9 3 speed2 x ELTA - Single Phase Transformer 16amps2 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)3 x Soaker Sheet to suit RA8005 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR3 x CBT-100N Centrifugal ATEX II 2G Exe II T33 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 400mm6 x 110 x 54mm Short Rectangular to Round Adaptor male3 x DDMP 12-09 FLANGE6 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan5 x 220x90mm Insulated Rectangular T-Piece4 x CBT-130N Centrifugal2 x Vent Axia T-Series Wall Model TX9WL1 x 125mm Round Connector with Damper1 x Run On Timer - 5s - 4hrs - RT5A2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase3 x RDH Flange - 04002 x Elta Quietflow Twin SQT200-1ECL3 x Elta SLC500/4B-1AC - IP551 x Flanged Damper 019-0500-STD3 x KBD- outlet mounting flange for CRMT 3551 x FAST-TRACK RANGE 75mm - Seal Ring (1 bag of 10)3 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting2 x High Temperature Flexible Connector - 063-0630-PU2501 x Duct Termination with Mesh - 200mm2 x JMS-5606 x Spiral Ducting 1 meter - 355mm3 x VA 9/2 T - High Temp Axial Fan,5 x CBA-130 Inlet Flange for CBT-1304 x Potentiometer EGH 01 - for DDMP Fans1 x Silentub - STUB 2001 x EM30-24 Electro-Mechanical Control Panel2 x DDMP 09-09 1F 1000W M6A1 DA52 x ELTA - Single Phase Transformer 8amps2 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)3 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase4 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-H4 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting4 x Vent Axia W300310 Controller Electronic 1.5A1 x BDS 400/450 RA b/d shutter1 x EM30-24 Control Panel Commissioning Service1 x RF-100 F7 Grade Filter for S&P MVHR units5 x Chaysol da 9-7 - 3 Speed2 x RDH Flange - 04502 x DDMP 09/07 Mounting Flange5 x Atex Inline Fan 180mm - ERM18EXE4 x CFI Lite 600 Carbon Filter2 x Elta Turboflow-TF - 450mm - Single phase2 x CAD-COMPACT 500 ADVANCED N8 - MVHR unit1 x TD ECOWATT 160/100 Inline Duct Fan - TD-ECOWATT2 x Ancillary Pack for SB-Biflow 250 model2 x RD31S-4DW.6Q.AL - 121303 (Three Phase)2 x Chaysol DA 7/7 NT (V600002)3 x CBT-130N Centrifugal ATEX II 2G Exd IIB T42 x FlameProof Plate Axial Fan - Single Phase - 15 inches - Eexd IIC T4 -4pole2 x Elta Quietflow Twin SQT150-1ECL3 x Helios VARW 450/4 - TK2 x Ancillary Pack for SLC-4002 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line3 x 220x90mm Rectangular to 150mm Round Adaptor1 x RD31S-4EW.6Q.AL - 122296 (Single Phase)1 x Purlin Box 800 for RAW Cowls1 x 204x60mm Rectangular to 100mm Round Adaptor1 x Elta SLC1000/4C-3AC - IP553 x Elta SCP315/4-1AC - IP551 x Nicotra RDH E2-0200 (R)1 x Elta Skyflow SSRL710-1EC2 x Impeller Side Guard - 800mm1 x Elta SPA400/4-1AC - IP541 x RDH E0-0400 Mounting Feet (pair)2 x AL 1120 Mounting Flange2 x Elta SCP500/4-3AC - IP551 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm2 x KRJ - 225 Inlet Guard2 x Slimline 150 High Efficiency, Low Profile Heat Recovery Unit1 x Elta SCP450/4-1AC - IP551 x Elta SCP630/4-1AC - IP551 x Northern Ireland Pallet Surcharge2 x Ancillary Pack for SB-Biflow 315 model1 x EHB 160 1.0kw - Helios Electric Heater Battery with Control and Sensor.1 x ELTA - Single Phase Transformer 4amps3 x DDMP 07-07 1F 1100W M6AO DA51 x CBM 7/9 4p 300W RE-VR2 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x MEV Spider Additional Spigots1 x IP65 Remote Speed Adjustment Station2 x Elta Turboflow-TF - 630mm - Three phase1 x Side Withdrawal Casing - 1H x 1W - To suit 100 Panel and 292 HEPA1 x MV-Silent 350 Bathroom Extractor Fan Kit - Timer1 x MV EC 100 Multivent1 x Elta SCP350/4-1AC - IP551 x DDMP 10-10 FLANGE1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x DPD 12PM Delivery Surcharge2 x DDMP 12-12 FLANGE2 x Impeller Side Guard - 450mm1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 200mm1 x Blast Gate (Manual) 355mm1 x MWS 1.5 – Transformer Controller With Motor Protection1 x LC080L43-A9-40 - Long Cased Axial1 x Chaysol Da 12/12 CMAL - 1100W 6 Pole - Closed Motor - Three Phase1 x CBM Low Pressure Centrifugal Fan - CBM 12/9 6 Pole 736watt C1 x RDH Flange - 02003 x Access Door for Circular Duct - 250 x 150 - SIZE 151 x Elta Standard Ambient Flexible Connector - 450mm1 x 204x60mm Insulated Rectangular T-Piece1 x ERM180EXE Bracket1 x REB Ecowatt Speed Control - REB-ECO1 x Soaker Sheet to suit RA3501 x Helios ZNE Electronic Fan Overrun Timer1 x Quadro Micro 100 Filters - Individual1 x REB-CVF 0-10v Controller1 x Control switch - CR1501 x Electronic extractor fan speed controller - FSC 1.51 x 204x60mm Insulated Rectangular Horizontal 45° Bend1 x Transformer Speed Control - RTRE- 5.0Amp1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...