• Model:443319L

Lo-Carbon Sentinel Kinetic BH - LEFT

£ 1,199.00 (excl. VAT)

£ 1,438.80 (inc. VAT)

Lo-Carbon Sentinel Kinetic BH Left

* Recognised in SAP PCDB
* Lightweight for easier installation
* Horizontal duct option for space-saving installations
* Fits within a 290mm deep kitchen cupboard
* Integrated digital controller for simple and accurate commissioning
* Plug and play control; Humidistat
* BMS connectivity
* LS inputs (Light Switch)
* Horizontal duct options
* Acoustic Enclosure & Top Box options

Stock Ref. No: 443319L

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.

For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.

Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Acoustic Solution

PDF Files


Data Sheet

2 x Elta 6 Amp Electronic single phase speed controller.3 x VTR 300 STD Filter Kit2 x Compact SCD450/4-1AC2 x CFI In-line 150 - Carbon Filter1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5952 x DDMP 10-08 3F 2210W M6A4 DG02 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)1 x RD35S-4DW.6W.3L - 122297 (Three Phase)1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x TUNE-R-200-3-M4 - Control Damper4 x 100mm Round Connector with Damper2 x DS-2 2-Speed Switch (3 Phase)2 x AIRVENT speed control - AIR4019612 x Speed Controller - REB2.5-N1 x Comefri - TLZ 450 R - High Performance Scroll Fan2 x Quietflow Twin SQTDCV250-1ECL2 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan5 x Elta SCP400/4-1AC - IP552 x SAVE VSR 300 heat recovery unit2 x DA9/9-NT4 x Duct Termination with Mesh - 450mm1 x CO2 Room Sensor - CO2-R1 x IR24-P - Presence detector2 x ACO3TO-ADS-VFC-7.1A4 x SPI-100 C Iris damper1 x Duct Termination with Mesh - 100mm5 x Helios RR-250-C Centrifugal inline fan1 x Flakt Woods ME 1.3 speed controller 3amp - EA9011585 x Duct Termination with Mesh - 150mm4 x CBT-100N Centrifugal2 x Duct Termination with Mesh - 355mm3 x HIMF - Mixed Flow Fan 125mm Inline Fan3 x ACO8AC/EC AutoChangeover panel1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR2 x DDMP 07/07 Mounting Flange2 x ADH E0-450 Flange - 0450 ADHE/RDHE2 x CSB-60 Centrifugal fan2 x CCpro 40 (1CC9402) Long Casing Extension1 x MTP 10, 10K, Speed control4 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Vent Axia Trickle & Boost Switch2 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan3 x Duct Termination with Mesh - 250mm3 x KAD-225-F400 Rectangle Flexible Connector2 x RDS 1 Helios Transformer Controller With Motor Protection1 x Duct Termination with Mesh - 400mm1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x CPTA-E Flush mounted PIR sensor with timer2 x REU 3amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Electrostatic Precipitator - 1H x 3W1 x Comefri - TLZ 560 R - High Performance Scroll Fan1 x Chaysol Da 12/12 CMAL - 1100W 6 Pole - Closed Motor - Three Phase1 x Transformer 5 Speed Controller - ATC1-10TK1 x Transformer (silent) speed controller - RE 1.5 Amp1 x KBA- inlet mounting flange for CRMT 2501 x Speed Controller - REB11 x Lo-Carbon Silhouette 100T (Timer)2 x RDH Flange - 03151 x Chaysol Da 15/11 CMAL - 2200W 6 Pole - Closed Motor - Three Phase2 x RDH Flange - 02501 x Mini Diffuser - 100mm3 x Helios ESA-1 Surface mounted Speed Control 1amp1 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x Elta SLC560/4C-3AC - IP551 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost3 x ELTA - Three Phase Transformer 3amps1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line4 x Flat Roof Terminal -OFT 5 - Asphalt1 x KBA- Inlet Mounting 1801 x TEM 075 - 5 Speed Transformer Speed Control1 x Speed Controller - REB61 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Comefri - TLZ 225 R - High Performance Scroll Fan1 x TD Mixvent 1100/250 EEXEIIT31 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan2 x RUCK MTP 20, 10K, Speed control3 x 125mm Round Connector with Damper2 x Elta Turboflow-TF - 450mm - Single phase1 x MWS-75 Transformer controller with TK -7.5A1 x Vent Axia ACM 200 inline mixed flow duct fan3 x Flanged Damper 019-0560-STD3 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x TUNE-R-200-3-M2 - Control Damper1 x CBB-80N Centrifugal4 x Helios HQW-355/4 - IP553 x CBA-100 Inlet Flange for CBT-1001 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C1 x DEF-CBM-RE-7 - Protection Guard1 x Round ceiling diffuser 300mm1 x SD-MUB Vibration pad set1 x Quietflow SQS250-1ECL - Centrifugal Box Fan1 x RTRD - Three Phase Speed Controller - 4 Amp1 x Vent Axia T-Series Controller2 x Transformer Speed Control - RTRE- 3.0Amp1 x MTS10- extractor fan 3 step switch2 x Elta SPA500/4-1AC - IP541 x EBM-Papst D3G133-BF05-14 Double inlet3 x DDMP 12-12 3F 5700W M6M0 DG71 x Nicotra RDH G2E7-04501 x Twinflow STDL315-1EC1 x Speed Controller - REB1-N3 x Speed Controller - REB161 x TUNE-R-200-3-M3 - Control Damper1 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR1 x Run On Timer - 5s - 4hrs - RT5A1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x Backdraught Shutters 039-SFSV-63/711 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x Purlin Box 800 for RAW Cowls2 x FU 15 16 Frequency Inverter2 x Multi Input Run On Timer - 0 - 20min - CFCU1 x CBP-18/18-RC Belt Driven Centrifugal Fans1 x TecFire Intumescent Damper - Rectangular 400x400mm1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase1 x Round ceiling diffuser 250mm1 x SPI-200 C Iris damper1 x Duct Termination with Mesh - 800mm1 x VKS 355-500 Automatic shutter2 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x CBA-130 Inlet Flange for CBT-1301 x SDD-U Anti Vibration Pads1 x VEKA INT 2000/15.0-L1 EKO1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX400/4-3 Three Phase2 x DDMP 10-10 1F 1000W M6A2 DA51 x Universal Pipe Fixing Clip1 x Elta 2 Amp Electronic single phase speed controller.1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x Kitchavent 2000 Odour control System - 18152522 x VTR 500 STD Filter Kit1 x CBT-130N Centrifugal ATEX II 2G Exd IIB T42 x CBB-60N Centrifugal1 x Elta SCP500/4-1AC - IP551 x ELTA - Single Phase Transformer 2amps1 x Vent Axia T-Series Wall Model TX9WL1 x DDMP 10-08 1F 1000W M6A2 DA51 x Elta SCP500/4-3AC - IP551 x DDMP 12-12 1F 1800W M6A4 DA81 x Flakt Woods ME 1.1 speed controller 1amp - EA9011572 x KBA- Inlet Mounting 2251 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x REE-2 Electronic Speed Controller1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Duct Termination with Mesh - 710mm1 x HIMF - Mixed Flow Fan 100mm Inline Fan2 x HXP450/6-1 - 6 Pole - Single Phase1 x RDH Flange - 04501 x DDMP 10-08 FLANGE1 x Elta HXP 800mm 6-Pole (Three Phase)1 x RTRD - Three Phase Speed Controller - 2 Amp1 x EFSC-3N- Single Phase Speed Control1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Transformer Speed Control - RTRE- 5.0Amp1 x Spiral Ducting 1 meter - 355mm3 x CBS-100 Outlet Flange for CBT-1001 x Spiral Ducting 1 meter - 200mm1 x Elta Turboflow-TF - 630mm - Three phase1 x Elta SLC630/4-1AC - IP551 x UB47- Universal Insulated Terminal2 x Silent 300 CZ Design PLUS Extractor Fan1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 1100watt 6PT (Closed Motor)1 x Elta SCP350/4-1AC - IP551 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x DPD 12PM Delivery Surcharge1 x MWS 5 – Transformer Controller With Motor Protection Unit1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT2 x KMBI 250 Connector rectangular/circular to install on the discharge of CMT2 x Speed Controller - REB52 x KBA- Inlet Mounting 3552 x KAD-355-F400 Rectangle Flexible Connector1 x CMT/4-250-100 1.1KW - Single inlet centrifugal fan direct driven ( LG-90)1 x KBA- Inlet Mounting 2801 x KRJ - 280 Inlet Guard1 x Duct Termination with Mesh - 200mm1 x Capacitor 2uf for use with the EBM A4E range2 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x RR EC 160 Centrifugal inline fan - Energy Efficient Motor1 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x KBA- inlet mounting flange for CRMT 2251 x CMT/4-315/130-4KW - Single inlet centrifugal fan direct driven1 x ILHT/4-560 MV - High Temp Rectangle Duct Fan1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 400mm1 x CS2 Current Switch1 x Silentub - STUB 2001 x Round ceiling diffuser 400mm1 x Binks Bullows - Spray Booth Filter1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/4-3 Three Phase1 x Transformer 5 Speed Controller - ATC1-8TK1 x Elta Variable Speed Drive IP66 - 7.5KW2 x Elta Variable Speed Drive IP66 - 4.0KW1 x Silentub - STUB 1001 x Two Speed Switch - REGUL-21 x Silent 100 Window Kit - windowS1 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan1 x Access Door for Circular Duct - 250 x 150 - SIZE 151 x CBT-80N Centrifugal1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Rectangular Airbrick Adaptor1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x ADH E0-280 Flange - 0280 ADHE/RDHE1 x VA 9/2 T - High Temp Axial Fan,1 x JMS-5601 x AL 1120 Mounting Flange1 x CBA-160 Inlet Flange for CBT-1601 x Impeller Side Guard - 450mm1 x CBS-160 Outlet Flange for CBT-1601 x CBP-9/9 LOW PRESSURE CENTRIFUGAL FAN1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Step switch S-5EC, 0-10V
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...