• Model:443319L

Lo-Carbon Sentinel Kinetic BH - LEFT

£ 1,199.00 (excl. VAT)

£ 1,438.80 (inc. VAT)

Lo-Carbon Sentinel Kinetic BH Left

* Recognised in SAP PCDB
* Lightweight for easier installation
* Horizontal duct option for space-saving installations
* Fits within a 290mm deep kitchen cupboard
* Integrated digital controller for simple and accurate commissioning
* Plug and play control; Humidistat
* BMS connectivity
* LS inputs (Light Switch)
* Horizontal duct options
* Acoustic Enclosure & Top Box options

Stock Ref. No: 443319L

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.

For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.

Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Acoustic Solution

PDF Files


Data Sheet

1 x TecFire Intumescent Damper - Rectangular 400x400mm1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase2 x ENV 100 12v transformer SELV2 x CBT-100N Centrifugal2 x ACO8AC/EC AutoChangeover panel1 x SD-MUB Vibration pad set2 x CBA-100 Inlet Flange for CBT-1002 x DEF-CBM-RE-7 - Protection Guard1 x Binks Bullows - Spray Booth Filter1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Duct Termination with Mesh - 500mm1 x Elta SCP400/4-1AC - IP551 x Spiral end cap - 355mm1 x RDH Flange - 02503 x CBS-100 Outlet Flange for CBT-1002 x BDS 350 RA b/d shutter1 x RDH Flange - 03151 x Singleflow SSDL315-1EC3 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR2 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x ELTA - Three Phase Transformer 3amps2 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)2 x DDMP 10-10 1F 1000W M6A2 DA51 x QPTW 250C Acoustic Twin Fan with Controller1 x Duct Termination with Mesh - 400mm2 x RUCK MTP 20, 10K, Speed control3 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x DDMP 12-09 1F 1800W M6A4 DA82 x Flanged Damper 019-0560-STD1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan4 x PM230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x RDH Flange - 04001 x Blast Gate (Manual) 355mm1 x TUNE-R-160-1-M1 - Control Damper1 x CBM 9-9 550w 4P VR (Open Motor)2 x Elta SCP350/4-1AC - IP552 x MWS-75 Transformer controller with TK -7.5A2 x Chaysol DA 9/9 3 speed2 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x FU 22 25 Frequency Inverter1 x TUNE-R-200-3-M3 - Control Damper1 x Twinflow STDL315-1EC1 x GRA-100 External Grill by S&P1 x Transformer Speed Control - RTRE- 1.5Amp2 x DDMP 12-12 1F 1800W M6A4 DA81 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x DEF-900AN1 x CBM 7/7 147w 4P RE-VR1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Silent 300 CZ Design PLUS Extractor Fan1 x 125mm Round Connector with Damper1 x Spiral end cap - 80mm1 x Skyflow SSR Horizontal Roof Cowl SSR31/35B1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/4-3 Three Phase2 x DDMP 10-08 1F 1000W M6A2 DA53 x Vent Axia T-Series Wall Model TX9WL1 x CBB-60N Centrifugal1 x CBM 7/9 4p 300W RE-VR2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase1 x Elta Quietflow Twin SQT125-1ECL1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 150mm2 x Helios ZNE Electronic Fan Overrun Timer1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan2 x Universal Pipe Fixing Clip2 x CBM 9/7 4p 420W RE-VR1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x CBA-130 Inlet Flange for CBT-1302 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 100mm2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase1 x JPA-560 Accessory Adapter Plate1 x Impeller Side Guard - 250mm1 x Access Door for Circular Duct - 250 x 150 - SIZE 251 x RDH E0-0400 Mounting Feet (pair)1 x Jetflow Silent SJMF-S 200-1EC1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Soaker Sheet to suit RA630/7101 x Transformer Speed Control - RTRE- 5.0Amp1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting2 x PML230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse2 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Helios HQW-200/2 - IP551 x Raptor SDA560/4-1AC1 x Potentiometer EGH 01 - for DDMP Fans1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x DDMP 10-10 FLANGE2 x Duct Termination with Mesh - 315mm1 x CBS-60 Outlet Flange for CSB/CBT-601 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x AW 550 D6-2-EX Explosion Proof Axial Fan - ATEX1 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x Elta Standard Ambient Flexible Connector - 350mm1 x ELTA - Single Phase Transformer 2amps1 x Transformer (silent) speed controller - RE 5.0 Amp1 x Elta Variable Speed Drive IP66 - 4.0KW1 x Elta Standard Ambient Flexible Connector - 710mm1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...