• Model:443319L

Lo-Carbon Sentinel Kinetic BH - LEFT

£ 1,199.00 (excl. VAT)

£ 1,438.80 (inc. VAT)

Lo-Carbon Sentinel Kinetic BH Left

* Recognised in SAP PCDB
* Lightweight for easier installation
* Horizontal duct option for space-saving installations
* Fits within a 290mm deep kitchen cupboard
* Integrated digital controller for simple and accurate commissioning
* Plug and play control; Humidistat
* BMS connectivity
* LS inputs (Light Switch)
* Horizontal duct options
* Acoustic Enclosure & Top Box options

Stock Ref. No: 443319L

Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.

For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.

Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.

Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.

Acoustic Solution

PDF Files


Data Sheet

1 x Mini Diffuser - 100mm2 x DDMP 10-08 3F 2210W M6A4 DG02 x TUNE-R-200-3-M2 - Control Damper1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan2 x Potentiometer EGH 01 - for DDMP Fans1 x Electrostatic Precipitator - 1H x 3W3 x CBA-100 Inlet Flange for CBT-1001 x ACO8AC/EC AutoChangeover panel1 x TD160-NT Mixvent - 100mm - TD160 Timer2 x AXC TP - 100mm Plastic Centrifugal Inline Fan1 x Duct Termination with Mesh - 710mm3 x Helios ZNE Electronic Fan Overrun Timer1 x Polyurethane Foam Media - 10PPI - Filter Media Sheets - Size: 2000mm x 1000mm2 x TUNE-R-250-1-M2 - Control Damper1 x TUNE-R-100-2-M1 - Control Damper1 x TUNE-R-160-3-M0 - Control Damper (NO ACTUATOR)1 x Helios RR-250-C Centrifugal inline fan2 x 204x60mm Insulated Rectangular Vertical 90° Bend2 x TUNE-R-200-3-M5 - Control Damper2 x CO2 Room Sensor - CO2-R2 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)2 x 110 x 54mm Round to Rectangular Adaptor - Long1 x TUNE-R-160-2-M3 - Control Damper1 x TUNE-R-160-1-M1 - Control Damper1 x REB-CVF 0-10v Controller1 x TUNE-R-180-2-M5 - Control Damper2 x Ancillary Pack for SLC-800 for 4 Pole and SLC-800/6B-3AC1 x AXC TP - 150mm Plastic Centrifugal Inline Fan2 x DDMP 10-10 1F 1000W M6A2 DA51 x AKOR Mounting Plate for GD model(VIM166423)1 x 204x60mm Insulated Rectangular Horizontal 45° Bend3 x CBS-100 Outlet Flange for CBT-1002 x TUNE-R-560-2-M1 - Control Damper1 x Duct Termination with Mesh - 355mm2 x SDD-U Anti Vibration Pads1 x SPI-100 C Iris damper2 x TUNE-R-200-3-M3 - Control Damper1 x EFSC-3N- Single Phase Speed Control1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x DDMP 12-12 3F 5700W M6M0 DG71 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase2 x TUNE-R-315-3-M1 - Control Damper2 x HIMF - Mixed Flow Fan 125mm Inline Fan3 x ELTA - Three Phase Transformer 3amps1 x VA 9/2 T - High Temp Axial Fan,1 x Silentub - STUB 2001 x Flat Roof Terminal -OFT 5 - Asphalt1 x Elta SCP400/4-1AC - IP551 x DDMP 10-08 FLANGE2 x TUNE-R-160-3-M2 - Control Damper1 x DDMP 12-09 1F 1800W M6A4 DA81 x Helios HQW-355/4 - IP551 x Duct Termination with Mesh - 450mm1 x CBT-130N Centrifugal1 x MWS 5 – Transformer Controller With Motor Protection Unit1 x PM230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x Control switch - CR1501 x Remote controller FLEX - for VEKO INT1 x Helios TSW 7.5 Amp Transformer speed controller1 x MWS 3 – Transformer Controller With Motor Protection1 x VEKA INT 2000/15.0-L1 EKO1 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x Speed Controller - REB31 x GRA-100 External Grill by S&P1 x FLEX CONNECTOR FOR MFQ-560 FAN1 x RDH Flange - 03151 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Transformer speed controller - ATC1 - 1.5 Amps1 x Helios TSW 3 Amp Transformer speed controller1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x Binks Bullows - Spray Booth Filter1 x 220x90mm x 1m Insulated Rectangular Duct1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 200mm1 x Duct Termination with Mesh - 500mm1 x TUNE-R-250-1-M1 - Control Damper1 x MWS-75 Transformer controller with TK -7.5A1 x Duct Termination with Mesh - 200mm1 x Elta Variable Speed Drive IP66 - 0.75KW1 x Helios PA10 Speed Potentiometer1 x 125mm Round Connector with Damper1 x Acoustic Box Fans (Inline) - CAB-355 RE1 x Run On Timer - 5s - 4hrs - RT5A
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 58.40

I have a loft mount extractor fan which was very noisy. I ...